Organic Coatings, Properties and Evaluation (Diagnosis of Mineral Disorders in Plants)

0 avg rating
( 0 ratings by Goodreads )
 
9780820603063: Organic Coatings, Properties and Evaluation (Diagnosis of Mineral Disorders in Plants)
View all copies of this ISBN edition:
 
 

Contents Introduction - 1. Adhesion - 2. Flexibility - 3. Hardness - 4. Abrasion Resistance - 5. Tensile Strength and Elongation - 6. Water and Moisture Resistance - 7. Chemical Resistance - 8. Fire and Heat Resistance - 9. Natural and Artificial Weathering - 10. Biological Deterioration of Paints and Paint Films - 11. Drying Time - 12. Measurements of Film Thickness - 13. Viscosity and Consistency - 14. Density - 15. Hiding Power - 16. Color - 17. Gloss - 18. Evaluation of Interior Latex Paints - 19. Evaluation of Exterior Latex House Paints - 20. Evaluation of Solvent-Based Exterior Paints - 21. Evaluation of Metal Primers and Primer Surfacers - 22. Analysis of Whole Paint - 23. Evaluation of Unpigmented Coatings - 24. Evaluation of Bituminous Coatings - 25. Selection of Paints - 26. A Look At Industrial Finishes - 27. Paint Failures and Defects - Appendix A-Glossary of Terms - Appendix B-ASTM Listings by Chapter - Appendix C-ASTM Listings - Index - Preface - Paints have been part of man's environment for thousands of years. The cave man was probably the first who tested a paint to see if it was dry enough to apply another color when completing his cave paintings. For centuries paints were used for decorative purposes. Only after the industrial revolution were paints employed for the protection of various substrates. The earliest coatings were used for the protection of iron parts which had a tendency to corrode rapidly, especially near the sea. As the manufacturing and shipping industries grew, other problems of protection developed and new and more effective coatings became available. In today's highly industrialized society large amounts of paints and paint systems are found ranging from the simple latex-based, water-thinnable wall paint, used in housing, to the multilayered, polymeric, resin coatings used in waste disposal or nuclear generating stations. All other paints are collectively referred to as coatings and have one thing in common-they are produced against a set of requirements which are commensurate with the performance demanded of the dry paint film, and are applied to the substrate. As an example, an architectural paint is designed to give the interior wall a certain color and provide an aesthetic experience for the viewer. An epoxy-based enamel, used on a mixing tank, is designed to provide a smooth, easily-cleanable surface and to protect the steel members from corrosion. The application and demands are too numerous to mention. This book provides a comprehensive discussion of the physical properties of coatings, how they are measured, and how these factors are used to evaluate quality, inherent performance, and durability of the coating.

"synopsis" may belong to another edition of this title.

Buy New View Book
List Price: US$ 110.00
US$ 122.91

Convert currency

Shipping: US$ 11.48
From United Kingdom to U.S.A.

Destination, rates & speeds

Add to Basket

Top Search Results from the AbeBooks Marketplace

1.

Felix Konstandt
Published by Chemical Publishing Co Inc.,U.S. (1985)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Quantity Available: > 20
Print on Demand
Seller:
Books2Anywhere
(Fairford, GLOS, United Kingdom)
Rating
[?]

Book Description Chemical Publishing Co Inc.,U.S., 1985. HRD. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Seller Inventory # IQ-9780820603063

More information about this seller | Contact this seller

Buy New
US$ 122.91
Convert currency

Add to Basket

Shipping: US$ 11.48
From United Kingdom to U.S.A.
Destination, rates & speeds

2.

Felix Konstandt
Published by Chemical Publishing Company (1985)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Hardcover Quantity Available: 1
Seller:
Ergodebooks
(RICHMOND, TX, U.S.A.)
Rating
[?]

Book Description Chemical Publishing Company, 1985. Hardcover. Condition: New. Subsequent. Seller Inventory # DADAX0820603066

More information about this seller | Contact this seller

Buy New
US$ 132.50
Convert currency

Add to Basket

Shipping: US$ 3.99
Within U.S.A.
Destination, rates & speeds

3.

Felix Konstandt
Published by Chemical Publishing Co Inc.,U.S., United States (1985)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Hardcover Quantity Available: 10
Print on Demand
Seller:
Book Depository International
(London, United Kingdom)
Rating
[?]

Book Description Chemical Publishing Co Inc.,U.S., United States, 1985. Hardback. Condition: New. Subsequent. Language: English . Brand New Book ***** Print on Demand *****. Contents Introduction - 1. Adhesion - 2. Flexibility - 3. Hardness - 4. Abrasion Resistance - 5. Tensile Strength and Elongation - 6. Water and Moisture Resistance - 7. Chemical Resistance - 8. Fire and Heat Resistance - 9. Natural and Artificial Weathering - 10. Biological Deterioration of Paints and Paint Films - 11. Drying Time - 12. Measurements of Film Thickness - 13. Viscosity and Consistency - 14. Density - 15. Hiding Power - 16. Color - 17. Gloss - 18. Evaluation of Interior Latex Paints - 19. Evaluation of Exterior Latex House Paints - 20. Evaluation of Solvent-Based Exterior Paints - 21. Evaluation of Metal Primers and Primer Surfacers - 22. Analysis of Whole Paint - 23. Evaluation of Unpigmented Coatings - 24. Evaluation of Bituminous Coatings - 25. Selection of Paints - 26. A Look At Industrial Finishes - 27. Paint Failures and Defects - Appendix A-Glossary of Terms - Appendix B-ASTM Listings by Chapter - Appendix C-ASTM Listings - Index - Preface - Paints have been part of man s environment for thousands of years. The cave man was probably the first who tested a paint to see if it was dry enough to apply another color when completing his cave paintings. For centuries paints were used for decorative purposes. Only after the industrial revolution were paints employed for the protection of various substrates. The earliest coatings were used for the protection of iron parts which had a tendency to corrode rapidly, especially near the sea. As the manufacturing and shipping industries grew, other problems of protection developed and new and more effective coatings became available. In today s highly industrialized society large amounts of paints and paint systems are found ranging from the simple latex-based, water-thinnable wall paint, used in housing, to the multilayered, polymeric, resin coatings used in waste disposal or nuclear generating stations. All other paints are collectively referred to as coatings and have one thing in common-they are produced against a set of requirements which are commensurate with the performance demanded of the dry paint film, and are applied to the substrate. As an example, an architectural paint is designed to give the interior wall a certain color and provide an aesthetic experience for the viewer. An epoxy-based enamel, used on a mixing tank, is designed to provide a smooth, easily-cleanable surface and to protect the steel members from corrosion. The application and demands are too numerous to mention. This book provides a comprehensive discussion of the physical properties of coatings, how they are measured, and how these factors are used to evaluate quality, inherent performance, and durability of the coating. Seller Inventory # APC9780820603063

More information about this seller | Contact this seller

Buy New
US$ 140.28
Convert currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

4.

Felix Konstandt
Published by Chemical Publishing Co Inc.,U.S. (1985)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Quantity Available: > 20
Print on Demand
Seller:
Pbshop
(Wood Dale, IL, U.S.A.)
Rating
[?]

Book Description Chemical Publishing Co Inc.,U.S., 1985. HRD. Condition: New. New Book. Shipped from US within 10 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Seller Inventory # IQ-9780820603063

More information about this seller | Contact this seller

Buy New
US$ 136.91
Convert currency

Add to Basket

Shipping: US$ 3.99
Within U.S.A.
Destination, rates & speeds

5.

Felix Konstandt
Published by Chemical Publishing Co Inc.,U.S., United States (1985)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Hardcover Quantity Available: 10
Print on Demand
Seller:
The Book Depository
(London, United Kingdom)
Rating
[?]

Book Description Chemical Publishing Co Inc.,U.S., United States, 1985. Hardback. Condition: New. Subsequent. Language: English . Brand New Book ***** Print on Demand *****.Contents Introduction - 1. Adhesion - 2. Flexibility - 3. Hardness - 4. Abrasion Resistance - 5. Tensile Strength and Elongation - 6. Water and Moisture Resistance - 7. Chemical Resistance - 8. Fire and Heat Resistance - 9. Natural and Artificial Weathering - 10. Biological Deterioration of Paints and Paint Films - 11. Drying Time - 12. Measurements of Film Thickness - 13. Viscosity and Consistency - 14. Density - 15. Hiding Power - 16. Color - 17. Gloss - 18. Evaluation of Interior Latex Paints - 19. Evaluation of Exterior Latex House Paints - 20. Evaluation of Solvent-Based Exterior Paints - 21. Evaluation of Metal Primers and Primer Surfacers - 22. Analysis of Whole Paint - 23. Evaluation of Unpigmented Coatings - 24. Evaluation of Bituminous Coatings - 25. Selection of Paints - 26. A Look At Industrial Finishes - 27. Paint Failures and Defects - Appendix A-Glossary of Terms - Appendix B-ASTM Listings by Chapter - Appendix C-ASTM Listings - Index - Preface - Paints have been part of man s environment for thousands of years. The cave man was probably the first who tested a paint to see if it was dry enough to apply another color when completing his cave paintings. For centuries paints were used for decorative purposes. Only after the industrial revolution were paints employed for the protection of various substrates. The earliest coatings were used for the protection of iron parts which had a tendency to corrode rapidly, especially near the sea. As the manufacturing and shipping industries grew, other problems of protection developed and new and more effective coatings became available. In today s highly industrialized society large amounts of paints and paint systems are found ranging from the simple latex-based, water-thinnable wall paint, used in housing, to the multilayered, polymeric, resin coatings used in waste disposal or nuclear generating stations. All other paints are collectively referred to as coatings and have one thing in common-they are produced against a set of requirements which are commensurate with the performance demanded of the dry paint film, and are applied to the substrate. As an example, an architectural paint is designed to give the interior wall a certain color and provide an aesthetic experience for the viewer. An epoxy-based enamel, used on a mixing tank, is designed to provide a smooth, easily-cleanable surface and to protect the steel members from corrosion. The application and demands are too numerous to mention. This book provides a comprehensive discussion of the physical properties of coatings, how they are measured, and how these factors are used to evaluate quality, inherent performance, and durability of the coating. Seller Inventory # APC9780820603063

More information about this seller | Contact this seller

Buy New
US$ 145.12
Convert currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

6.

Konstandt, F.
Published by Chemical Publishing Company (2016)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Paperback Quantity Available: 1
Print on Demand
Seller:
Ria Christie Collections
(Uxbridge, United Kingdom)
Rating
[?]

Book Description Chemical Publishing Company, 2016. Paperback. Condition: New. PRINT ON DEMAND Book; New; Publication Year 2016; Not Signed; Fast Shipping from the UK. No. book. Seller Inventory # ria9780820603063_lsuk

More information about this seller | Contact this seller

Buy New
US$ 142.91
Convert currency

Add to Basket

Shipping: US$ 4.92
From United Kingdom to U.S.A.
Destination, rates & speeds

7.

Felix Konstandt
Published by Chemical Publishing Company
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Hardcover Quantity Available: > 20
Seller:
BuySomeBooks
(Las Vegas, NV, U.S.A.)
Rating
[?]

Book Description Chemical Publishing Company. Hardcover. Condition: New. 254 pages. Dimensions: 9.0in. x 6.0in. x 0.7in.Contents Introduction - 1. Adhesion - 2. Flexibility - 3. Hardness - 4. Abrasion Resistance - 5. Tensile Strength and Elongation - 6. Water and Moisture Resistance - 7. Chemical Resistance - 8. Fire and Heat Resistance - 9. Natural and Artificial Weathering - 10. Biological Deterioration of Paints and Paint Films - 11. Drying Time - 12. Measurements of Film Thickness - 13. Viscosity and Consistency - 14. Density - 15. Hiding Power - 16. Color - 17. Gloss - 18. Evaluation of Interior Latex Paints - 19. Evaluation of Exterior Latex House Paints - 20. Evaluation of Solvent-Based Exterior Paints - 21. Evaluation of Metal Primers and Primer Surfacers - 22. Analysis of Whole Paint - 23. Evaluation of Unpigmented Coatings - 24. Evaluation of Bituminous Coatings - 25. Selection of Paints - 26. A Look At Industrial Finishes - 27. Paint Failures and Defects - Appendix A-Glossary of Terms - Appendix B-ASTM Listings by Chapter - Appendix C-ASTM Listings - Index - Preface - Paints have been part of mans environment for thousands of years. The cave man was probably the first who tested a paint to see if it was dry enough to apply another color when completing his cave paintings. For centuries paints were used for decorative purposes. Only after the industrial revolution were paints employed for the protection of various substrates. The earliest coatings were used for the protection of iron parts which had a tendency to corrode rapidly, especially near the sea. As the manufacturing and shipping industries grew, other problems of protection developed and new and more effective coatings became available. In todays highly industrialized society large amounts of paints and paint systems are found ranging from the simple latex-based, water-thinnable wall paint, used in housing, to the multilayered, polymeric, resin coatings used in waste disposal or nuclear generating stations. All other paints are collectively referred to as coatings and have one thing in common-they are produced against a set of requirements which are commensurate with the performance demanded of the dry paint film, and are applied to the substrate. As an example, an architectural paint is designed to give the interior wall a certain color and provide an aesthetic experience for the viewer. An epoxy-based enamel, used on a mixing tank, is designed to provide a smooth, easily-cleanable surface and to protect the steel members from corrosion. The application and demands are too numerous to mention. This book provides a comprehensive discussion of the physical properties of coatings, how they are measured, and how these factors are used to evaluate quality, inherent performance, and durability of the coating. This item ships from multiple locations. Your book may arrive from Roseburg,OR, La Vergne,TN. Hardcover. Seller Inventory # 9780820603063

More information about this seller | Contact this seller

Buy New
US$ 166.78
Convert currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, rates & speeds

8.

F. Konstandt; Felix Konstandt
Published by Chemical Publishing Company (1985)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Hardcover Quantity Available: 1
Seller:
Irish Booksellers
(Portland, ME, U.S.A.)
Rating
[?]

Book Description Chemical Publishing Company, 1985. Condition: New. book. Seller Inventory # M0820603066

More information about this seller | Contact this seller

Buy New
US$ 167.83
Convert currency

Add to Basket

Shipping: US$ 3.27
Within U.S.A.
Destination, rates & speeds

9.

F. Konstandt; Felix Konstandt
Published by Chemical Publishing Company (1985)
ISBN 10: 0820603066 ISBN 13: 9780820603063
New Hardcover Quantity Available: 1
Print on Demand
Seller:
Rating
[?]

Book Description Chemical Publishing Company, 1985. Condition: New. This item is printed on demand for shipment within 3 working days. Seller Inventory # GM9780820603063

More information about this seller | Contact this seller

Buy New
US$ 191.11
Convert currency

Add to Basket

Shipping: US$ 3.15
From Germany to U.S.A.
Destination, rates & speeds