Interconnecting Cisco Network Devices (Cisco Career Certifications)

ISBN 10: 1578701112 ISBN 13: 9781578701117

Publisher: Cisco Systems, 2000

Synopsis

Cisco authorized self-study book for CCNA foundation learning

• Prepare for CCNA exam #640-607 certification while learning the fundamentals of setting up, configuring, maintaining, and troubleshooting Cisco networks
• Determine in which situations a hub, Ethernet switch, or router would be more appropriately used Use Cisco software to identify addresses, protocols, and connectivity status in a network containing multiple interconnected Cisco devices
• Interconnect Cisco switches and routers according to a given network design specification
• Configure Cisco switches and routers to support a specified list of protocols and technologies
• Configure access lists to control access to network devices or segments and general network traffic
• Verify that Cisco switches and routers, as well as their configured network services and protocols, operate as intended within a given network specification

Interconnecting Cisco Network Devices is a Cisco authorized self-paced learning tool for CCNA foundation learning. This book provides you with the knowledge needed to identify and recommend the best Cisco solutions for small- to medium-sized businesses. This book teaches you how to perform all the basic configuration procedures to build a multirouter, multigroup internetwork that uses LAN and WAN interfaces for the most commonly used routing and routed protocols.

This book provides the installation, configuration, and troubleshooting information required to install and configure Cisco products. You will learn the fundamentals of interconnecting Cisco network devices in five modules: getting started with Cisco networks (assembling, cabling, operating, configuring, and managing devices), interconnecting Catalyst(r) switches (fundamental switch operations and VLAN configuration), interconnecting Cisco routers (TCP/IP, IP routing, traffic management, and IPX configuration), extending the network to WANs (serial point-to-point connections, ISDN BRI, and Frame Relay PVC connections), and supplemental appendixes (AppleTalk(r), HyperTerminal, Cisco 700 series routers, and password recovery techniques). Each chapter concludes with questions to help assess your understanding of key concepts and start you down the path for attaining your CCNA certification.

Interconnecting Cisco Network Devices is part of a recommended learning path from Cisco Systems that can include simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. In order to find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining.

About this title

Review:

Here's a book that clearly and concisely explains the low-level internetworking concepts that make the Internet go. If you read Internetworking Cisco Network Devices and come to understand its subject matter, you'll be well prepared to pass the Cisco Certified Network Associate (CCNA) exam (640-507) and do a bang-up job at most any networking job you choose to pursue. This book explains Internet-standard data communications protocols (the TCP/IP suite and routing algorithms particularly) in terms of their implementations on Cisco routers, switches, and software systems. By doing so, it prepares you to install, configure, manage, and troubleshoot Cisco equipment.

If you're starting from near zero on the networking knowledge scale (and even if you're not), you'll likely want to read this book from beginning to end. The authors lay down a conceptual foundation (including excellent coverage of the Open Systems Interconnection reference model) in early chapters, and subsequently proceed to place Cisco-specific knowledge on top of that base. The text frequently seems dry, but it's clear that the authors and editors went to considerable trouble to get their facts right and drive home the big concepts with illustrations. Test-preparation aids are limited to a dozen or so review questions (with brief, minimally annotated answers at the back of the book), so it's clear that this book is about knowing the material, not preparing for an artificial test. It does readers a service. --David Wall

Topics covered: The contents of the Cisco Certified Network Associate (CCNA) exam (640-507), which verifies knowledge of interconnections among networks as implemented with Cisco equipment running Internet-standard protocols. Coverage spans selection of hardware from the Cisco line, cabling, configuring Internetwork Operating System (IOS), setting up switched networks with Catalyst 1900 switches, and establishing virtual local area networks (VLANs). Plenty of coverage goes to TCP/IP under Cisco gear, including routing protocols, the configuration of routes, and point-to-point communication over wide area network (WAN) links of various kinds.

From the Back Cover:

Cisco authorized self-study book for CCNA foundation learning

* Prepare for CCNA exam #640-607 certification while learning the fundamentals of setting up, configuring, maintaining, and troubleshooting Cisco networks
* Determine in which situations a hub, Ethernet switch, or router would be more appropriately used
* Interconnect Cisco switches and routers according to a given network design specification
* Configure Cisco switches and routers to support a specified list of protocols and technologies
* Configure access lists to control access to network devices or segments and general network traffic
* Verify that Cisco switches and routers, as well as their configured network services and protocols, operate as intended within a given network specification

Interconnecting Cisco Network Devices is a Cisco authorized self-paced learning tool for CCNA foundation learning. This book provides you with the knowledge needed to identify and recommend the best Cisco solutions for small- to medium-sized businesses. This book teaches you how to perform all the basic configuration procedures to build a multirouter, multigroup internetwork that uses LAN and WAN interfaces for the most commonly used routing and routed protocols.

This book provides the installation, configuration, and troubleshooting information required to install and configure Cisco products. You will learn the fundamentals of interconnecting Cisco network devices in five modules: getting started with Cisco networks (assembling, cabling, operating, configuring, and managing devices), interconnecting Catalyst(r) switches (fundamental switch operations and VLAN configuration), interconnecting Cisco routers (TCP/IP, IP routing, traffic management, and IPX configuration), extending the network to WANs (serial point-to-point connections, ISDN BRI, and Frame Relay PVC connections), and supplemental appendixes (AppleTalk(r), HyperTerminal, Cisco 700 series routers, and password recovery techniques). Each chapter concludes with questions to help assess your understanding of key concepts and start you down the path for attaining your CCNA certification.

Interconnecting Cisco Network Devices is part of a recommended learning path from Cisco Systems that can include simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. In order to find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit cisco/go/authorizedtraining.

About this edition

• Publisher: Cisco Systems
• Publication date: 2000
• ISBN 10: 1578701112
• ISBN 13: 9781578701117
• Binding: Textbook Binding
• Edition number: 1
• Number of pages: 600
• Editor: McQuerry Stephen