Items related to Spindles (Workshop Practice Series)
Synopsis
If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers.
The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards.
"synopsis" may belong to another edition of this title.
Search results for Spindles (Workshop Practice Series)
Stock Image
Spindles (Workshop Practice Series)
Published by
Special Interest Model Books, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
Used
Paperback
Seller: ThriftBooks-Dallas, Dallas, TX, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 0.52. Seller Inventory # G1854861492I3N00
Quantity: 1 available
Stock Image
Spindles (Workshop Practice Series)
Published by
Special Interest Model Books, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
Used
Softcover
Seller: SecondSale, Montgomery, IL, U.S.A.
Seller rating 5 out of 5 stars
Condition: Good. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc. Seller Inventory # 00089433874
Quantity: 2 available
Seller Image
Spindles
Published by
Special Interest Model Books, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
Used
Softcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: As New. Unread book in perfect condition. Seller Inventory # 1484716
Quantity: 2 available
Seller Image
Spindles: 27 (Workshop Practice Series)
Published by
Special Interest Model Books, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
Used
Softcover
Seller: WeBuyBooks, Rossendale, LANCS, United Kingdom
Seller rating 5 out of 5 stars
Condition: Like New. Most items will be dispatched the same or the next working day. An apparently unread copy in perfect condition. Dust cover is intact with no nicks or tears. Spine has no signs of creasing. Pages are clean and not marred by notes or folds of any kind. Seller Inventory # wbs9403883007
Quantity: 1 available
Seller Image
Spindles
Published by
Special Interest Model Books, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
New
Softcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 1484716-n
Quantity: 2 available
Seller Image
Spindles (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
New
Paperback
Seller: Grand Eagle Retail, Mason, OH, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. With the model and amateur engineer in mind, this is a guide to making light milling or grinding spindles with a small lathe. Spindles come in many shapes and sizes, depending on their use and included here are descriptions of the design, construction and use of a variety of types (from 19.05 - 57.15mm/0.75 - 2.25 inch) for grinding, milling and drilling. The emphasis is on spindles which are easy to make and have as few parts as possible - all but one use sealed ball bearings. The author is a designer, machinist and woodworker whose interest in clock making led him to design and build the spindles in the book. Also included is a light gear cutting frame for clock makers. Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Seller Inventory # 9781854861498
Quantity: 1 available
Stock Image
Spindles
Published by
Fox Chapel Publishers International, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
New
PAP
Seller: PBShop.store US, Wood Dale, IL, U.S.A.
Seller rating 5 out of 5 stars
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000. Seller Inventory # GB-9781854861498
Quantity: 2 available
Seller Image
Spindles
Published by
Fox Chapel Publishers International, GB, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
New
Paperback
Seller: Rarewaves.com USA, London, LONDO, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: New. If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards. Seller Inventory # LU-9781854861498
Quantity: Over 20 available
Stock Image
Spindles: 27 (Workshop Practice Series)
Published by
Fox Chapel Publishers International, United Kingdom, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
Used
Paperback
Seller: WorldofBooks, Goring-By-Sea, WS, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged. Seller Inventory # GOR002732465
Quantity: 3 available
Stock Image
Spindles
Published by
Fox Chapel Publishers International, 1998
ISBN 10: 1854861492
ISBN 13: 9781854861498
New
PAP
Seller: PBShop.store UK, Fairford, GLOS, United Kingdom
Seller rating 5 out of 5 stars
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000. Seller Inventory # GB-9781854861498
Quantity: 2 available