Hot Cracking Phenomena in Welds II (No. 2)

0 avg rating
( 0 ratings by Goodreads )
 
9783540786276: Hot Cracking Phenomena in Welds II (No. 2)
View all copies of this ISBN edition:
 
 

Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 – Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007.

"synopsis" may belong to another edition of this title.

From the Back Cover:

This is the second in a series of compendiums devoted to weld hot cracking phenomena, where this subject has been further scrutinized, bringing to bare the most current thoughts on this complex and diverse subject. With 22 technical papers in total, this book is divided in such a way that specific classifications of hot cracks are examined in detail, including solidification, liquation, and ductility dip cracking. The first chapter looks at solidification cracking theory, applying the most modern approaches to modelling weld solidification. Also provided here is a comprehensive review of cracking models. This is followed by two chapters characterizing solidification cracking behaviour for specific alloy systems: ferrous plus nickel-based alloys and aluminium alloys, respectively. The fourth chapter considers liquation cracking in ferrous alloys, and the fifth examines ductility-dip cracking. For engineers and scientists involved in materials research and development, this book provides both new insight and a broad overview of hot cracking phenomena in welds. The contributions additionally give numerous individual solutions and helpful advice for welding engineers to avoid hot cracking in practice. Furthermore, this book can serve as a useful teaching aid for upper level metallurgical, welding and mechanical engineering students.

"About this title" may belong to another edition of this title.

List Price: US$ 249.99
US$ 226.51

Convert currency

Shipping: US$ 2.64
Within U.S.A.

Destination, rates & speeds

Add to Basket

Other Popular Editions of the Same Title

9783642097379: Hot Cracking Phenomena in Welds II

Featured Edition

ISBN 10:  3642097375 ISBN 13:  9783642097379
Publisher: Springer, 2010
Softcover

Top Search Results from the AbeBooks Marketplace

1.

Bollinghaus, Thomas (edt); The Ohio State, University
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Quantity Available: 2
Seller:
GreatBookPrices
(Columbia, MD, U.S.A.)

Book Description Condition: New. Seller Inventory # 5645314-n

More information about this seller | Contact this seller

Buy New
US$ 226.51
Convert currency

Add to Basket

Shipping: US$ 2.64
Within U.S.A.
Destination, rates & speeds

2.

Thomas Böllinghaus (Editor), Horst Herold (Editor), Carl E. Cross (Editor), J C Lippold (Editor)
Published by Springer (2008)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Hardcover Quantity Available: 1
Seller:
Ergodebooks
(RICHMOND, TX, U.S.A.)

Book Description Springer, 2008. Hardcover. Condition: New. 1. Seller Inventory # DADAX3540786279

More information about this seller | Contact this seller

Buy New
US$ 230.42
Convert currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, rates & speeds

3.

Bollinghaus, Thomas (EDT)/ Herold, Horst (EDT)/ Cross, Carl E. (EDT)/ Lippold, John C. (EDT)
Published by Springer 2008-06-26 (2008)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Hardcover Quantity Available: 2
Seller:
Chiron Media
(Wallingford, United Kingdom)

Book Description Springer 2008-06-26, 2008. HARDCOVER. Condition: New. Seller Inventory # NU-LBR-00680141

More information about this seller | Contact this seller

Buy New
US$ 231.90
Convert currency

Add to Basket

Shipping: US$ 11.95
From United Kingdom to U.S.A.
Destination, rates & speeds

4.

BÃ llinghaus, Thomas
Published by Springer (2017)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Paperback Quantity Available: 10
Print on Demand
Seller:
Ria Christie Collections
(Uxbridge, United Kingdom)

Book Description Springer, 2017. Paperback. Condition: New. PRINT ON DEMAND Book; New; Publication Year 2017; Not Signed; Fast Shipping from the UK. No. book. Seller Inventory # ria9783540786276_lsuk

More information about this seller | Contact this seller

Buy New
US$ 251.51
Convert currency

Add to Basket

Shipping: US$ 4.96
From United Kingdom to U.S.A.
Destination, rates & speeds

5.

Thomas Böllinghaus
Published by Springer-Verlag Gmbh Jun 2008 (2008)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Quantity Available: 1
Seller:
Rheinberg-Buch
(Bergisch Gladbach, Germany)

Book Description Springer-Verlag Gmbh Jun 2008, 2008. Buch. Condition: Neu. Neuware - Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 - Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007. 467 pp. Englisch. Seller Inventory # 9783540786276

More information about this seller | Contact this seller

Buy New
US$ 244.09
Convert currency

Add to Basket

Shipping: US$ 18.97
From Germany to U.S.A.
Destination, rates & speeds

6.

Thomas Böllinghaus
Published by Springer-Verlag Gmbh Jun 2008 (2008)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Quantity Available: 1
Seller:
BuchWeltWeit Inh. Ludwig Meier e.K.
(Bergisch Gladbach, Germany)

Book Description Springer-Verlag Gmbh Jun 2008, 2008. Buch. Condition: Neu. Neuware - Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 - Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007. 467 pp. Englisch. Seller Inventory # 9783540786276

More information about this seller | Contact this seller

Buy New
US$ 244.09
Convert currency

Add to Basket

Shipping: US$ 18.97
From Germany to U.S.A.
Destination, rates & speeds

7.

Thomas Böllinghaus
Published by Springer-Verlag Gmbh Jun 2008 (2008)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Quantity Available: 1
Seller:
AHA-BUCH GmbH
(Einbeck, Germany)

Book Description Springer-Verlag Gmbh Jun 2008, 2008. Buch. Condition: Neu. Neuware - Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 - Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007. 467 pp. Englisch. Seller Inventory # 9783540786276

More information about this seller | Contact this seller

Buy New
US$ 244.09
Convert currency

Add to Basket

Shipping: US$ 38.21
From Germany to U.S.A.
Destination, rates & speeds

8.

Published by Springer (2019)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Hardcover Quantity Available: 2
Print on Demand
Seller:
Save With Sam
(North Miami, FL, U.S.A.)

Book Description Springer, 2019. Hardcover. Condition: New. Brand New! This item is printed on demand. Seller Inventory # VIB3540786279

More information about this seller | Contact this seller

Buy New
US$ 285.34
Convert currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, rates & speeds

9.

Published by Springer
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Hardcover Quantity Available: > 20
Seller:
Russell Books
(Victoria, BC, Canada)

Book Description Springer. Hardcover. Condition: New. 3540786279 Special order direct from the distributor. Seller Inventory # ING9783540786276

More information about this seller | Contact this seller

Buy New
US$ 337.49
Convert currency

Add to Basket

Shipping: US$ 6.99
From Canada to U.S.A.
Destination, rates & speeds

10.

Published by Springer-Verlag Berlin and Heidelberg GmbH & Co. KG, Germany (2008)
ISBN 10: 3540786279 ISBN 13: 9783540786276
New Hardcover Quantity Available: 1
Seller:
The Book Depository EURO
(London, United Kingdom)

Book Description Springer-Verlag Berlin and Heidelberg GmbH & Co. KG, Germany, 2008. Hardback. Condition: New. 2008 ed. Language: English. Brand new Book. Failure of welded components can occur during service as well as during fabrication. Most common, analyses of the resistance of welded components against failure are targeted at crack avoidance. Such evaluations are increasingly carried out by modern weldability studies, i. e. considering interactions between the selected base and filler materials, structural design and welding process. Such weldability investigations are particularly targeted to prevent hot cracking, as one of the most common cracking phenomena occurring during weld fabrication. To provide an international information and discussion platform to combat hot cracking, an international workshop on Hot Cracking Phenomena in Welds has been created, based on an initiative of the Institute for Materials and Joining Technology at the Otto-von-Guericke University in Magdeburg and the Division V. 5 - Safety of Joined Components at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany. The first workshop was organized in Berlin under the topics mechanisms and phenomena, metallurgy and materials, modelling and simulations as well as testing and standardization. It consisted of 20 individual contributions from eight countries, which were compiled in a book that found a very ready market, not only in the welding community. As a consequence of increasing interest, it has been decided to establish the Workshop on Hot Cracking Phenomena in Welds as a regular event every three years embedded in the International Institute of Welding (IIW). Attached to the IIW Commission IX and II Spring intermediate meetings, the second workshop was organized in March 2007. Seller Inventory # LIB9783540786276

More information about this seller | Contact this seller

Buy New
US$ 366.13
Convert currency

Add to Basket

Shipping: US$ 3.84
From United Kingdom to U.S.A.
Destination, rates & speeds

There are more copies of this book

View all search results for this book