THE EFFECT OF TOOL WEAR IN MACHINING: MODELING OF THE EFFECT OF TOOL WEAR ON CUTTING FORCES IN TURNING

 
9783639215533: THE EFFECT OF TOOL WEAR IN MACHINING: MODELING OF THE EFFECT OF TOOL WEAR ON CUTTING FORCES IN TURNING
View all copies of this ISBN edition:
 
 

Machining is the most widely used and efficient material removal process, and tool wear in machining is usually of great interest in order to improve machining efficiency and effectiveness. Cutting tool wear patterns such as the flank and crater wear and the dead metal zone (DMZ) may induce the cutting tool geometry variation in machining. As a result, cutting forces may increase or decrease due to the change of tool effective cutting geometry during machining operations. A quantitative understanding of and the ability to predict cutting forces in relation to tool wear are important to the tool life estimation, chatter prediction, and tool condition monitoring. Most available force models are limited to fresh tool conditions or worn tool conditions only considering the flank wear. Furthermore, the effect of DMZ on cutting forces, especially when a chamfered tool is used, is frequently ignored. The objective of this dissertation is to analytically model the combined effect of the crater and flank wear as well as the effect of DMZ on cutting forces in 2D and 3D turning.

"synopsis" may belong to another edition of this title.

Buy New View Book
List Price: US$ 92.00
US$ 65.30

Convert currency

Shipping: US$ 9.83
From United Kingdom to U.S.A.

Destination, rates & speeds

Add to Basket

Top Search Results from the AbeBooks Marketplace

1.

Yu Long (author)
Published by VDM Verlag 2010-02-25 (2010)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New paperback Quantity Available: > 20
Seller:
Blackwell's
(Oxford, OX, United Kingdom)
Rating
[?]

Book Description VDM Verlag 2010-02-25, 2010. paperback. Condition: New. Seller Inventory # 9783639215533

More information about this seller | Contact this seller

Buy New
US$ 65.30
Convert currency

Add to Basket

Shipping: US$ 9.83
From United Kingdom to U.S.A.
Destination, rates & speeds

2.

Long, Yu
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Quantity Available: 1
Seller:
Rating
[?]

Book Description Condition: New. Publisher/Verlag: VDM Verlag Dr. Müller | MODELING OF THE EFFECT OF TOOL WEAR ON CUTTING FORCES IN TURNING | Machining is the most widely used and efficient material removal process, and tool wear in machining is usually of great interest in order to improve machining efficiency and effectiveness. Cutting tool wear patterns such as the flank and crater wear and the dead metal zone (DMZ) may induce the cutting tool geometry variation in machining. As a result, cutting forces may increase or decrease due to the change of tool effective cutting geometry during machining operations. A quantitative understanding of and the ability to predict cutting forces in relation to tool wear are important to the tool life estimation, chatter prediction, and tool condition monitoring. Most available force models are limited to fresh tool conditions or worn tool conditions only considering the flank wear. Furthermore, the effect of DMZ on cutting forces, especially when a chamfered tool is used, is frequently ignored. The objective of this dissertation is to analytically model the combined effect of the crater and flank wear as well as the effect of DMZ on cutting forces in 2D and 3D turning. | Format: Paperback | Language/Sprache: english | 249 gr | 180 pp. Seller Inventory # K9783639215533

More information about this seller | Contact this seller

Buy New
US$ 74.20
Convert currency

Add to Basket

Shipping: US$ 3.44
From Germany to U.S.A.
Destination, rates & speeds

3.

Long, Yu
Published by VDM Verlag (2016)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Paperback Quantity Available: 1
Print on Demand
Seller:
Ria Christie Collections
(Uxbridge, United Kingdom)
Rating
[?]

Book Description VDM Verlag, 2016. Paperback. Condition: New. PRINT ON DEMAND Book; New; Publication Year 2016; Not Signed; Fast Shipping from the UK. No. book. Seller Inventory # ria9783639215533_lsuk

More information about this seller | Contact this seller

Buy New
US$ 84.71
Convert currency

Add to Basket

Shipping: US$ 5.06
From United Kingdom to U.S.A.
Destination, rates & speeds

4.

Yu Long
Published by VDM Verlag (2010)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Quantity Available: > 20
Print on Demand
Seller:
Books2Anywhere
(Fairford, GLOS, United Kingdom)
Rating
[?]

Book Description VDM Verlag, 2010. PAP. Condition: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Seller Inventory # LQ-9783639215533

More information about this seller | Contact this seller

Buy New
US$ 78.15
Convert currency

Add to Basket

Shipping: US$ 11.79
From United Kingdom to U.S.A.
Destination, rates & speeds

5.

Yu Long
Published by VDM Verlag (2010)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Quantity Available: > 20
Print on Demand
Seller:
Pbshop
(Wood Dale, IL, U.S.A.)
Rating
[?]

Book Description VDM Verlag, 2010. PAP. Condition: New. New Book. Shipped from US within 10 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Seller Inventory # IQ-9783639215533

More information about this seller | Contact this seller

Buy New
US$ 87.46
Convert currency

Add to Basket

Shipping: US$ 3.99
Within U.S.A.
Destination, rates & speeds

6.

Yu Long
Published by VDM Verlag Mrz 2010 (2010)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Taschenbuch Quantity Available: 1
Seller:
BuchWeltWeit Inh. Ludwig Meier e.K.
(Bergisch Gladbach, Germany)
Rating
[?]

Book Description VDM Verlag Mrz 2010, 2010. Taschenbuch. Condition: Neu. Neuware - Machining is the most widely used and efficient material removal process, and tool wear in machining is usually of great interest in order to improve machining efficiency and effectiveness. Cutting tool wear patterns such as the flank and crater wear and the dead metal zone (DMZ) may induce the cutting tool geometry variation in machining. As a result, cutting forces may increase or decrease due to the change of tool effective cutting geometry during machining operations. A quantitative understanding of and the ability to predict cutting forces in relation to tool wear are important to the tool life estimation, chatter prediction, and tool condition monitoring. Most available force models are limited to fresh tool conditions or worn tool conditions only considering the flank wear. Furthermore, the effect of DMZ on cutting forces, especially when a chamfered tool is used, is frequently ignored. The objective of this dissertation is to analytically model the combined effect of the crater and flank wear as well as the effect of DMZ on cutting forces in 2D and 3D turning. 180 pp. Englisch. Seller Inventory # 9783639215533

More information about this seller | Contact this seller

Buy New
US$ 80.54
Convert currency

Add to Basket

Shipping: US$ 19.70
From Germany to U.S.A.
Destination, rates & speeds

7.

Yu Long
Published by VDM Verlag Mrz 2010 (2010)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Taschenbuch Quantity Available: 1
Seller:
Rheinberg-Buch
(Bergisch Gladbach, Germany)
Rating
[?]

Book Description VDM Verlag Mrz 2010, 2010. Taschenbuch. Condition: Neu. Neuware - Machining is the most widely used and efficient material removal process, and tool wear in machining is usually of great interest in order to improve machining efficiency and effectiveness. Cutting tool wear patterns such as the flank and crater wear and the dead metal zone (DMZ) may induce the cutting tool geometry variation in machining. As a result, cutting forces may increase or decrease due to the change of tool effective cutting geometry during machining operations. A quantitative understanding of and the ability to predict cutting forces in relation to tool wear are important to the tool life estimation, chatter prediction, and tool condition monitoring. Most available force models are limited to fresh tool conditions or worn tool conditions only considering the flank wear. Furthermore, the effect of DMZ on cutting forces, especially when a chamfered tool is used, is frequently ignored. The objective of this dissertation is to analytically model the combined effect of the crater and flank wear as well as the effect of DMZ on cutting forces in 2D and 3D turning. 180 pp. Englisch. Seller Inventory # 9783639215533

More information about this seller | Contact this seller

Buy New
US$ 80.54
Convert currency

Add to Basket

Shipping: US$ 19.70
From Germany to U.S.A.
Destination, rates & speeds

8.

Yu Long
Published by VDM Verlag Mrz 2010 (2010)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Taschenbuch Quantity Available: 1
Print on Demand
Seller:
AHA-BUCH GmbH
(Einbeck, Germany)
Rating
[?]

Book Description VDM Verlag Mrz 2010, 2010. Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Neuware - Machining is the most widely used and efficient material removal process, and tool wear in machining is usually of great interest in order to improve machining efficiency and effectiveness. Cutting tool wear patterns such as the flank and crater wear and the dead metal zone (DMZ) may induce the cutting tool geometry variation in machining. As a result, cutting forces may increase or decrease due to the change of tool effective cutting geometry during machining operations. A quantitative understanding of and the ability to predict cutting forces in relation to tool wear are important to the tool life estimation, chatter prediction, and tool condition monitoring. Most available force models are limited to fresh tool conditions or worn tool conditions only considering the flank wear. Furthermore, the effect of DMZ on cutting forces, especially when a chamfered tool is used, is frequently ignored. The objective of this dissertation is to analytically model the combined effect of the crater and flank wear as well as the effect of DMZ on cutting forces in 2D and 3D turning. 180 pp. Englisch. Seller Inventory # 9783639215533

More information about this seller | Contact this seller

Buy New
US$ 80.54
Convert currency

Add to Basket

Shipping: US$ 33.92
From Germany to U.S.A.
Destination, rates & speeds

9.

Yu Long
Published by VDM Verlag, Germany (2010)
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Paperback Quantity Available: 1
Seller:
The Book Depository EURO
(London, United Kingdom)
Rating
[?]

Book Description VDM Verlag, Germany, 2010. Paperback. Condition: New. Language: English . Brand New Book. Machining is the most widely used and efficient material removal process, and tool wear in machining is usually of great interest in order to improve machining efficiency and effectiveness. Cutting tool wear patterns such as the flank and crater wear and the dead metal zone (DMZ) may induce the cutting tool geometry variation in machining. As a result, cutting forces may increase or decrease due to the change of tool effective cutting geometry during machining operations. A quantitative understanding of and the ability to predict cutting forces in relation to tool wear are important to the tool life estimation, chatter prediction, and tool condition monitoring. Most available force models are limited to fresh tool conditions or worn tool conditions only considering the flank wear. Furthermore, the effect of DMZ on cutting forces, especially when a chamfered tool is used, is frequently ignored. The objective of this dissertation is to analytically model the combined effect of the crater and flank wear as well as the effect of DMZ on cutting forces in 2D and 3D turning. Seller Inventory # KNV9783639215533

More information about this seller | Contact this seller

Buy New
US$ 120.81
Convert currency

Add to Basket

Shipping: US$ 3.93
From United Kingdom to U.S.A.
Destination, rates & speeds

10.

Yu Long
Published by VDM Verlag
ISBN 10: 3639215532 ISBN 13: 9783639215533
New Paperback Quantity Available: > 20
Seller:
BuySomeBooks
(Las Vegas, NV, U.S.A.)
Rating
[?]

Book Description VDM Verlag. Paperback. Condition: New. 180 pages. Dimensions: 8.7in. x 5.9in. x 0.4in.Machining is the most widely used and efficient material removal process, and tool wear in machining is usually of great interest in order to improve machining efficiency and effectiveness. Cutting tool wear patterns such as the flank and crater wear and the dead metal zone (DMZ) may induce the cutting tool geometry variation in machining. As a result, cutting forces may increase or decrease due to the change of tool effective cutting geometry during machining operations. A quantitative understanding of and the ability to predict cutting forces in relation to tool wear are important to the tool life estimation, chatter prediction, and tool condition monitoring. Most available force models are limited to fresh tool conditions or worn tool conditions only considering the flank wear. Furthermore, the effect of DMZ on cutting forces, especially when a chamfered tool is used, is frequently ignored. The objective of this dissertation is to analytically model the combined effect of the crater and flank wear as well as the effect of DMZ on cutting forces in 2D and 3D turning. This item ships from multiple locations. Your book may arrive from Roseburg,OR, La Vergne,TN. Paperback. Seller Inventory # 9783639215533

More information about this seller | Contact this seller

Buy New
US$ 129.49
Convert currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, rates & speeds

There are more copies of this book

View all search results for this book