Al-Mg-Si Alloys: Micostructure, Hardness and Tensile Properties: TEM Studies of Microstructure in Relation to Hardness and Ductility in Al-Mg-Si (6xxx) Alloys

 
9783838329222: Al-Mg-Si Alloys: Micostructure, Hardness and Tensile Properties: TEM Studies of Microstructure in Relation to Hardness and Ductility in Al-Mg-Si (6xxx) Alloys

Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520C for 10 minutes and then annealed for 3 hours at 175C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size.

"synopsis" may belong to another edition of this title.

Buy New View Book
List Price: US$ 74.00
US$ 55.46

Convert Currency

Shipping: US$ 3.52
From Germany to U.S.A.

Destination, Rates & Speeds

Add to Basket

Top Search Results from the AbeBooks Marketplace

1.

Mageto, Maxwell
ISBN 10: 3838329228 ISBN 13: 9783838329222
New Quantity Available: 1
Seller:
Rating
[?]

Book Description Book Condition: New. Publisher/Verlag: LAP Lambert Academic Publishing | TEM Studies of Microstructure in Relation to Hardness and Ductility in Al-Mg-Si (6xxx) Alloys | Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size. | Format: Paperback | Language/Sprache: english | 116 pp. Bookseller Inventory # K9783838329222

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 55.46
Convert Currency

Add to Basket

Shipping: US$ 3.52
From Germany to U.S.A.
Destination, Rates & Speeds

2.

MAXWELL MAGETO
Published by LAP Lambert Acad. Publ. Dez 2009 (2009)
ISBN 10: 3838329228 ISBN 13: 9783838329222
New Taschenbuch Quantity Available: 1
Seller:
Rheinberg-Buch
(Bergisch Gladbach, Germany)
Rating
[?]

Book Description LAP Lambert Acad. Publ. Dez 2009, 2009. Taschenbuch. Book Condition: Neu. Neuware - Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size. 116 pp. Englisch. Bookseller Inventory # 9783838329222

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 59.41
Convert Currency

Add to Basket

Shipping: US$ 20.16
From Germany to U.S.A.
Destination, Rates & Speeds

3.

MAXWELL MAGETO
Published by LAP Lambert Acad. Publ. Dez 2009 (2009)
ISBN 10: 3838329228 ISBN 13: 9783838329222
New Taschenbuch Quantity Available: 1
Seller:
BuchWeltWeit Inh. Ludwig Meier e.K.
(Bergisch Gladbach, Germany)
Rating
[?]

Book Description LAP Lambert Acad. Publ. Dez 2009, 2009. Taschenbuch. Book Condition: Neu. Neuware - Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size. 116 pp. Englisch. Bookseller Inventory # 9783838329222

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 59.41
Convert Currency

Add to Basket

Shipping: US$ 20.16
From Germany to U.S.A.
Destination, Rates & Speeds

4.

MAXWELL MAGETO
Published by LAP Lambert Acad. Publ. (2010)
ISBN 10: 3838329228 ISBN 13: 9783838329222
New Paperback Quantity Available: 1
Seller:
The Book Depository EURO
(London, United Kingdom)
Rating
[?]

Book Description LAP Lambert Acad. Publ., 2010. Paperback. Book Condition: New. Language: English . Brand New Book. Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at Si, 0.577 at Mg and 0.57 at Si 0.72 at Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size. Bookseller Inventory # KNV9783838329222

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 89.10
Convert Currency

Add to Basket

Shipping: US$ 4.01
From United Kingdom to U.S.A.
Destination, Rates & Speeds

5.

MAXWELL MAGETO
Published by LAP Lambert Acad. Publ. Dez 2009 (2009)
ISBN 10: 3838329228 ISBN 13: 9783838329222
New Taschenbuch Quantity Available: 1
Print on Demand
Seller:
AHA-BUCH GmbH
(Einbeck, Germany)
Rating
[?]

Book Description LAP Lambert Acad. Publ. Dez 2009, 2009. Taschenbuch. Book Condition: Neu. This item is printed on demand - Print on Demand Neuware - Two different solution heat treatments were used to study precipitation in two 6xxx (Al-Mg-si) dispersoid-free-alloys with composition: 0.721 at % Si, 0.577 at % Mg and 0.57 at %Si 0.72 at % Mg. The relation between their microstructure and macroscopical properties such as hardness and ductility has been investigated. Tensile tests, hardness measurements, electrical conductivity sigma tests, grain size measurements in optical microscope and microstructure characterization in Transmission Electron Microscope (TEM) have all been done. The effect of alloy composition and solution heat treatment temperature and time on the microstructure and the resulting macroscopical properties (hardness, yield stress, tensile strength and ductility) was investigated. The results indicate that when alloy A3 is solution treated at 520°C for 10 minutes and then annealed for 3 hours at 175°C, its hardness, yield stress and tensile strength as well as ductility is optimised i.e.A3 has better mechanical properties and low cost of production at these conditions. It has been proved that the strengthening was solely due to precipitation particles and not grain size. 116 pp. Englisch. Bookseller Inventory # 9783838329222

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 59.41
Convert Currency

Add to Basket

Shipping: US$ 34.73
From Germany to U.S.A.
Destination, Rates & Speeds

6.

MAXWELL MAGETO
Published by LAP Lambert Academic Publishing (2009)
ISBN 10: 3838329228 ISBN 13: 9783838329222
New Paperback Quantity Available: 1
Seller:
Irish Booksellers
(Rumford, ME, U.S.A.)
Rating
[?]

Book Description LAP Lambert Academic Publishing, 2009. Paperback. Book Condition: New. book. Bookseller Inventory # M3838329228

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 112.32
Convert Currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, Rates & Speeds