Items related to A Finite Element Model of Warm Metal Powder Compaction...
A Finite Element Model of Warm Metal Powder Compaction Process: Application of Finite Element Method (FEM) in Modelling the Forming of Metal Powder at above Ambient Temperature - Softcover
Synopsis
The development of finite element model for the simulation of a complete warm forming process of powder sintered component is presented here. The material constitutive laws were derived based on a continuum mechanics approach. The process of green compact generation was represented by a large displacement based finite element formulation. Three constitutive relations, i.e., Mohr-Coulomb, Elliptical Cap, and combination of these two yield models were used to describe the deformation behaviour of the powder mass during compaction. However, an Elliptical Cap model was shown to be the most appropriate. A plasticity theory of friction was employed in the treatment of the powder-tooling interface. The Roscoe-Burland criterion was used to describe the densification and dimensional change of the compact during the sintering. The staggered-incremental-iterative solution strategy was established to solve the non-linearity in the systems of equations. The numerical simulation results were validated through experimentation where a good agreement was observed.
"synopsis" may belong to another edition of this title.
About the Author
Dr. Md. Mujibur Rahman is an Assoc. Prof. at the Dept. of Mech. Engineering, Universiti Tenaga Nasional-Malaysia. He successfully completed his first degree with Cum Laude from the Dept. of Petroleum Engineering, Islamic University of Riau-Indonesia. He later obtained his MSc and PhD degrees in Mechanical & Materials Engineering from UKM-Malaysia.
"About this title" may belong to another edition of this title.
Buy New
View this item
US$ 81.84
US$ 26.88 shipping from Germany to U.S.A.
Destination, rates & speedsSearch results for A Finite Element Model of Warm Metal Powder Compaction...
Seller Image
A Finite Element Model of Warm Metal Powder Compaction Process
Published by
LAP LAMBERT Academic Publishing Aug 2011, 2011
ISBN 10: 3845403977
ISBN 13: 9783845403977
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The development of finite element model for the simulation of a complete warm forming process of powder sintered component is presented here. The material constitutive laws were derived based on a continuum mechanics approach. The process of green compact generation was represented by a large displacement based finite element formulation. Three constitutive relations, i.e., Mohr-Coulomb, Elliptical Cap, and combination of these two yield models were used to describe the deformation behaviour of the powder mass during compaction. However, an Elliptical Cap model was shown to be the most appropriate. A plasticity theory of friction was employed in the treatment of the powder-tooling interface. The Roscoe-Burland criterion was used to describe the densification and dimensional change of the compact during the sintering. The staggered-incremental-iterative solution strategy was established to solve the non-linearity in the systems of equations. The numerical simulation results were validated through experimentation where a good agreement was observed. 196 pp. Englisch. Seller Inventory # 9783845403977
Quantity: 2 available
Seller Image
A Finite Element Model of Warm Metal Powder Compaction Process
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3845403977
ISBN 13: 9783845403977
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Rahman M. M.Dr. Md. Mujibur Rahman is an Assoc. Prof. at the Dept. of Mech. Engineering, Universiti Tenaga Nasional-Malaysia. He successfully completed his first degree with Cum Laude from the Dept. of Petroleum Engineering, Islamic . Seller Inventory # 5480552
Quantity: Over 20 available
Seller Image
A Finite Element Model of Warm Metal Powder Compaction Process
Published by
LAP LAMBERT Academic Publishing Aug 2011, 2011
ISBN 10: 3845403977
ISBN 13: 9783845403977
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The development of finite element model for the simulation of a complete warm forming process of powder sintered component is presented here. The material constitutive laws were derived based on a continuum mechanics approach. The process of green compact generation was represented by a large displacement based finite element formulation. Three constitutive relations, i.e., Mohr-Coulomb, Elliptical Cap, and combination of these two yield models were used to describe the deformation behaviour of the powder mass during compaction. However, an Elliptical Cap model was shown to be the most appropriate. A plasticity theory of friction was employed in the treatment of the powder-tooling interface. The Roscoe-Burland criterion was used to describe the densification and dimensional change of the compact during the sintering. The staggered-incremental-iterative solution strategy was established to solve the non-linearity in the systems of equations. The numerical simulation results were validated through experimentation where a good agreement was observed.Books on Demand GmbH, Überseering 33, 22297 Hamburg 196 pp. Englisch. Seller Inventory # 9783845403977
Quantity: 1 available
Seller Image
A Finite Element Model of Warm Metal Powder Compaction Process : Application of Finite Element Method (FEM) in Modelling the Forming of Metal Powder at above Ambient Temperature
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3845403977
ISBN 13: 9783845403977
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The development of finite element model for the simulation of a complete warm forming process of powder sintered component is presented here. The material constitutive laws were derived based on a continuum mechanics approach. The process of green compact generation was represented by a large displacement based finite element formulation. Three constitutive relations, i.e., Mohr-Coulomb, Elliptical Cap, and combination of these two yield models were used to describe the deformation behaviour of the powder mass during compaction. However, an Elliptical Cap model was shown to be the most appropriate. A plasticity theory of friction was employed in the treatment of the powder-tooling interface. The Roscoe-Burland criterion was used to describe the densification and dimensional change of the compact during the sintering. The staggered-incremental-iterative solution strategy was established to solve the non-linearity in the systems of equations. The numerical simulation results were validated through experimentation where a good agreement was observed. Seller Inventory # 9783845403977
Quantity: 1 available
Stock Image
A Finite Element Model of Warm Metal Powder Compaction Process: Application of Finite Element Method (FEM) in Modelling the Forming of Metal Powder at above Ambient Temperature
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3845403977
ISBN 13: 9783845403977
Used
Paperback
Seller: Mispah books, Redhill, SURRE, United Kingdom
Seller rating 4 out of 5 stars
Paperback. Condition: Like New. Like New. book. Seller Inventory # ERICA77338454039776
Quantity: 1 available