Shih, Randy

Published by Sdc Pubns, 2015
ISBN 10: 158503990X / ISBN 13: 9781585039906
Used / PAP / Quantity Available: 0
Available From More Booksellers
View all  copies of this book

About the Book

We're sorry; this specific copy is no longer available. AbeBooks has millions of books. We've listed similar copies below.

Description:

New Book. Shipped from US within 10 to 14 business days. Established seller since 2000. Bookseller Inventory #

About this title:

Synopsis:

This book will teach you everything you need to know to start using SOLIDWORKS 2016 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design.

No previous experience with Computer Aided Design (CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the SOLIDWORKS interface and its basic tools right away. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings.

Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of the powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using SolidWorks.

This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts.

In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action.

There are many books that show you how to perform individual tasks with SOLIDWORKS, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA Mechanical Tiger and can start building your own robot.

Table of Contents

1. Introduction - Getting Started
2. Parametric Modeling Fundamentals
3. CSG Concepts and Model History Tree
4. Parametric Constraints Fundamentals
5. Pictorials and Sketching
6. Symmetrical Features and Part Drawings
7. Datum Features in Designs
8. Gears and SolidWorks Design Library
9. Advanced 3D Construction Tools
10. Planar Linkage Analysis using GeoGebra
11. Design Makes the Difference
12. Assembly Modeling and Motion Analysis
Index

"About this title" may belong to another edition of this title.

Bibliographic Details

Publisher: Sdc Pubns
Publication Date: 2015
Binding: PAP
Book Condition: New

Top Search Results from the AbeBooks Marketplace

1.

ISBN 10: 158503990X ISBN 13: 9781585039906
Used Quantity Available: 1
Seller:
BombBooks
(King of prussia, PA, U.S.A.)
Rating
[?]

Book Description Condition: Good. May contain highlighting, handwriting or underlining through out the book. Book may show some wear. Used books may not contain supplements such as access codes, CDs, etc. Every item ships the same or next business day with tracking number emailed to you. Get Bombed!!. Seller Inventory # 3U1CFW000DRD

More information about this seller | Contact this seller

Buy Used
US$ 49.99
Convert currency

Add to Basket

Shipping: US$ 4.99
Within U.S.A.
Destination, rates & speeds

2.

Shih, Randy
Published by SDC Publications
ISBN 10: 158503990X ISBN 13: 9781585039906
New PERFECT PAPERBACK Quantity Available: 1
Seller:
K12books
(Scottsville, NY, U.S.A.)
Rating
[?]

Book Description SDC Publications. PERFECT PAPERBACK. Condition: New. 158503990X Expedited shipping available. Seller Inventory # Z158503990XZN

More information about this seller | Contact this seller

Buy New
US$ 55.86
Convert currency

Add to Basket

Shipping: US$ 4.95
Within U.S.A.
Destination, rates & speeds

3.

Randy Shih (author)
Published by Taylor and Francis 2015-12-30, Boca Raton (2015)
ISBN 10: 158503990X ISBN 13: 9781585039906
New paperback Quantity Available: 1
Seller:
Blackwell's
(Oxford, OX, United Kingdom)
Rating
[?]

Book Description Taylor and Francis 2015-12-30, Boca Raton, 2015. paperback. Condition: New. Seller Inventory # 9781585039906

More information about this seller | Contact this seller

Buy New
US$ 68.11
Convert currency

Add to Basket

Shipping: US$ 9.83
From United Kingdom to U.S.A.
Destination, rates & speeds

4.

Randy Shih
Published by SDC Publications
ISBN 10: 158503990X ISBN 13: 9781585039906
New Paperback Quantity Available: 6
Seller:
THE SAINT BOOKSTORE
(Southport, United Kingdom)
Rating
[?]

Book Description SDC Publications. Paperback. Condition: New. New copy - Usually dispatched within 2 working days. Seller Inventory # B9781585039906

More information about this seller | Contact this seller

Buy New
US$ 66.95
Convert currency

Add to Basket

Shipping: US$ 9.09
From United Kingdom to U.S.A.
Destination, rates & speeds

5.

Randy Shih
Published by SDC Publications, United States (2015)
ISBN 10: 158503990X ISBN 13: 9781585039906
New Paperback Quantity Available: 1
Seller:
Book Depository International
(London, United Kingdom)
Rating
[?]

Book Description SDC Publications, United States, 2015. Paperback. Condition: New. Language: English . Brand New Book. This book will teach you everything you need to know to start using SOLIDWORKS 2016 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. No previous experience with Computer Aided Design (CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the SOLIDWORKS interface and its basic tools right away. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of SOLIDWORKS s powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using SOLIDWORKS. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. There are many books that show you how to perform individual tasks with SOLIDWORKS, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot. Seller Inventory # AA69781585039906

More information about this seller | Contact this seller

Buy New
US$ 73.19
Convert currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

6.

Shih, Randy
Published by CRC Press (2015)
ISBN 10: 158503990X ISBN 13: 9781585039906
New Quantity Available: 5
Seller:
Books2Anywhere
(Fairford, GLOS, United Kingdom)
Rating
[?]

Book Description CRC Press, 2015. PAP. Condition: New. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Seller Inventory # FT-9781585039906

More information about this seller | Contact this seller

Buy New
US$ 71.61
Convert currency

Add to Basket

Shipping: US$ 11.79
From United Kingdom to U.S.A.
Destination, rates & speeds

7.

Randy Shih
Published by SDC Publications, United States (2015)
ISBN 10: 158503990X ISBN 13: 9781585039906
New Paperback Quantity Available: 1
Seller:
The Book Depository
(London, United Kingdom)
Rating
[?]

Book Description SDC Publications, United States, 2015. Paperback. Condition: New. Language: English . Brand New Book. This book will teach you everything you need to know to start using SOLIDWORKS 2016 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. No previous experience with Computer Aided Design (CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the SOLIDWORKS interface and its basic tools right away. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of SOLIDWORKS s powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using SOLIDWORKS. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. There are many books that show you how to perform individual tasks with SOLIDWORKS, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot. Seller Inventory # AA69781585039906

More information about this seller | Contact this seller

Buy New
US$ 75.08
Convert currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

8.

SHIH, RANDY
Published by CRC Press (2015)
ISBN 10: 158503990X ISBN 13: 9781585039906
New Paperback Quantity Available: 1
Seller:
Herb Tandree Philosophy Books
(Stroud, GLOS, United Kingdom)
Rating
[?]

Book Description CRC Press, 2015. Paperback. Condition: NEW. 9781585039906 This listing is a new book, a title currently in-print which we order directly and immediately from the publisher. For all enquiries, please contact Herb Tandree Philosophy Books directly - customer service is our primary goal. Seller Inventory # HTANDREE01275249

More information about this seller | Contact this seller

Buy New
US$ 75.57
Convert currency

Add to Basket

Shipping: US$ 10.45
From United Kingdom to U.S.A.
Destination, rates & speeds

9.

ISBN 10: 158503990X ISBN 13: 9781585039906
New Quantity Available: 3
Seller:
Majestic Books
(London, ,, United Kingdom)
Rating
[?]

Book Description Condition: New. pp. 512. Seller Inventory # 371469321

More information about this seller | Contact this seller

Buy New
US$ 75.35
Convert currency

Add to Basket

Shipping: US$ 7.21
From United Kingdom to U.S.A.
Destination, rates & speeds

10.

Randy Shih
Published by SDC Publications (2015)
ISBN 10: 158503990X ISBN 13: 9781585039906
New Softcover Quantity Available: 1
Seller:
Irish Booksellers
(Portland, ME, U.S.A.)
Rating
[?]

Book Description SDC Publications, 2015. Condition: New. book. Seller Inventory # M158503990X

More information about this seller | Contact this seller

Buy New
US$ 88.44
Convert currency

Add to Basket

Shipping: US$ 3.27
Within U.S.A.
Destination, rates & speeds

There are 5 more copies of this book

View all search results for this book