Product Type
Condition
Binding
Collectible Attributes
Seller Location
Seller Rating
Published by Independently published, 2019
ISBN 10: 1089251955ISBN 13: 9781089251958
Seller: Revaluation Books, Exeter, United Kingdom
Book
Paperback. Condition: Brand New. 42 pages. 11.69x8.27x0.11 inches. In Stock.
Published by Maack Business Services, 1985
Seller: Cambridge Rare Books, Cambridge, GLOUC, United Kingdom
HARDCOVER. Condition: VERY GOOD. 1985. Maack Business Services. Hardcover. Book-VG, silver titles on spine, slight wear to corners and spine ends. 12.5x8.75. 564pp. B/w photos and diagrams. Tables, graphs. Ex-Libris. BPChemicals Ltd Library, Grangemouth.
Published by LAP Lambert Academic Publishing, 2013
ISBN 10: 3659380245ISBN 13: 9783659380242
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Book Print on Demand
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659380245ISBN 13: 9783659380242
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Book
Condition: New.
Published by LAP Lambert Academic Publishing 2013-05, 2013
ISBN 10: 3659380245ISBN 13: 9783659380242
Seller: Chiron Media, Wallingford, United Kingdom
Book
PF. Condition: New.
Published by LAP LAMBERT Academic Publishing Mai 2013, 2013
ISBN 10: 3659380245ISBN 13: 9783659380242
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Book Print on Demand
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -A series of linear low-density polyethylene (LLDPE)-natural rubber (NR) blends of composition 80/10, 70/20, 60/30, 50/40 and 40/50 containing nano-sized fillers montmorillonite (MMT) and Titanium(IV) Oxide (TiO2) were produced by a twin-screw extruder with maleic anhydride grafted linear low-density polyethylene (LLDPE-g-MAH) of 10 wt% as a compatibilizer. An electrical performance test through partial discharge (PD) characteristics using CIGRE Method II test was conducted to study the electrical performance of the samples. Morphological analysis using scanning electron microscope (SEM) and Energy Disperse X-ray spectroscopy (EDX) also conducted after the samples of composite were subjected to high voltage stress. The degradation of composite surfaces were analyzed. Then tensile test carried out to investigate the mechanical performance of the composites. The combine results of PD characteristics and tensile properties described the insulating performance of the composites. The results revealed that total PD numbers decrease with increasing of weight percentages of natural rubber in the composition of the composite without any filler. 88 pp. Englisch.
Published by ICON Group International, Inc., 2010
ISBN 10: 1114421219ISBN 13: 9781114421219
Seller: Revaluation Books, Exeter, United Kingdom
Book Print on Demand
Paperback. Condition: Brand New. 34 pages. 9.00x7.00x0.08 inches. This item is printed on demand.
Published by China Press, 2000
ISBN 10: 7509531845ISBN 13: 9787509531846
Seller: liu xing, Nanjing JiangSu, JS, China
Book
paperback. Condition: New. Ship out in 2 business day, And Fast shipping, Free Tracking number will be provided after the shipment.Paperback Pages Number: 205 Language: Chinese. Linear low density polyethylene (LLDPE) in style on a simple question and answer style. in language easy to understand. easy to understand. readable. In the content. the series of risk education main line. not only carried out a detailed introduction to the basic knowledge and trading rules for the domestic market futures from futures to spot production. processing. trade and consumption of the industrial chain aspects of the product characteristics of the introduction of the system. allowing investors to get a more comprehensive and profound understanding.Four Satisfaction guaranteed,or money back.
Published by LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659380245ISBN 13: 9783659380242
Seller: AHA-BUCH GmbH, Einbeck, Germany
Book Print on Demand
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - A series of linear low-density polyethylene (LLDPE)-natural rubber (NR) blends of composition 80/10, 70/20, 60/30, 50/40 and 40/50 containing nano-sized fillers montmorillonite (MMT) and Titanium(IV) Oxide (TiO2) were produced by a twin-screw extruder with maleic anhydride grafted linear low-density polyethylene (LLDPE-g-MAH) of 10 wt% as a compatibilizer. An electrical performance test through partial discharge (PD) characteristics using CIGRE Method II test was conducted to study the electrical performance of the samples. Morphological analysis using scanning electron microscope (SEM) and Energy Disperse X-ray spectroscopy (EDX) also conducted after the samples of composite were subjected to high voltage stress. The degradation of composite surfaces were analyzed. Then tensile test carried out to investigate the mechanical performance of the composites. The combine results of PD characteristics and tensile properties described the insulating performance of the composites. The results revealed that total PD numbers decrease with increasing of weight percentages of natural rubber in the composition of the composite without any filler.
Published by LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659380245ISBN 13: 9783659380242
Seller: moluna, Greven, Germany
Book Print on Demand
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Zul Hilmey Makmud MohamadMohamad Zul Hilmey Makmud has obtained his Master on High Voltage Engineering at Faculty of Electrical Engineering, Universiti Teknologi Malaysia (UTM) in 2013. Currently he is a tutor at Universiti Malaysia .
Published by LAP LAMBERT Academic Publishing Jul 2016, 2016
ISBN 10: 3659910023ISBN 13: 9783659910029
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Book Print on Demand
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This Book Consists of novel blend system based on LLDPE and Silicone rubber has been developed for the power cable industry as an insulating compound. Compatibilization of the immiscible blends of LLDPE and Silicone rubber has been successfully achieved using EMA copolymer as a polymeric reactive compatibilizer through reactive blending. Electron beam irradiation of these compatible blends led to further improvement in their mechanical, thermal and dielectric properties, contributing towards higher performance of these materials as insulating compounds for power cable industry. Irradiated blends have been found to exhibit superior technical properties as compared to those of the chemically crosslinked blends at all blend compositions. Electron beam crosslinking offers more advantages compaired to the chemical crosslinking such as peroxide and silane technique. The comparison of the different crosslinking method clearly illustrate that electron beam irradiation is the best option & practical to use in the industrial application. The main advantage is fast cure time of production. 252 pp. Englisch.
Published by LAP LAMBERT Academic Publishing, 2016
ISBN 10: 3659910023ISBN 13: 9783659910029
Seller: AHA-BUCH GmbH, Einbeck, Germany
Book Print on Demand
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This Book Consists of novel blend system based on LLDPE and Silicone rubber has been developed for the power cable industry as an insulating compound. Compatibilization of the immiscible blends of LLDPE and Silicone rubber has been successfully achieved using EMA copolymer as a polymeric reactive compatibilizer through reactive blending. Electron beam irradiation of these compatible blends led to further improvement in their mechanical, thermal and dielectric properties, contributing towards higher performance of these materials as insulating compounds for power cable industry. Irradiated blends have been found to exhibit superior technical properties as compared to those of the chemically crosslinked blends at all blend compositions. Electron beam crosslinking offers more advantages compaired to the chemical crosslinking such as peroxide and silane technique. The comparison of the different crosslinking method clearly illustrate that electron beam irradiation is the best option & practical to use in the industrial application. The main advantage is fast cure time of production.
Published by LAP LAMBERT Academic Publishing, 2016
ISBN 10: 3659910023ISBN 13: 9783659910029
Seller: moluna, Greven, Germany
Book Print on Demand
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Giri RadhashyamDr. Radhashyam Giri received Doctor of Philosophy (Ph.D) from Rubber Technology Centre, Indian Institute of Technology, Kharagpur, and West Bengal, India in 2012. Dr. Giri has ten international peer reviewed journal pa.
Published by LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659380245ISBN 13: 9783659380242
Seller: Mispah books, Redhill, SURRE, United Kingdom
Book
Paperback. Condition: Like New. Like New. book.
Published by LAP LAMBERT Academic Publishing, 2016
ISBN 10: 3659910023ISBN 13: 9783659910029
Seller: Revaluation Books, Exeter, United Kingdom
Book
Paperback. Condition: Brand New. 252 pages. 8.66x5.91x0.57 inches. In Stock.