Computer Graphics: Principles and Practice - Hardcover

Van Dam, Andries; Feiner, Steven K.; Hughes, John F.

Hardcover

ISBN 10: 0201848406 ISBN 13: 9780201848403

Publisher: Addison-Wesley Professional, 1995

Synopsis

A guide to the concepts and applications of computer graphics covers such topics as interaction techniques, dialogue design, and user interface software.

About this title

About the Author

James D. Foley (Ph.D., University of Michigan) is the founding director of the interdisciplinary Graphics, Visualization & Usability Center at Georgia Institute of Technology, and Professor of Computer Science and of Electrical Engineering. Coauthor with Andries van Dam of Fundamentals of Interactive Computer Graphics, Foley is a member of ACM, ACM SIGGRAPH, ACM SIGCHI, the Human Factors Society, IEEE, and the IEEE Computer Society. He recently served as Editor-in-Chief of ACM Transactions on Graphics, and is on the editorial boards of Computers and Graphics, User Modeling and User-Adapted Interaction, and Presence. His research interests include model-based user interface development tools, user interface software, information visualization, multimedia, and human factors of the user interface. Foley is a Fellow of the IEEE, and a member of Phi Beta Kappa, Tau Beta Phi, Eta Kappa Nu, and Sigma Xi. At Georgia Tech, he has received College of Computing graduate student awards as Most Likely to Make Students Want to Grow Up to Be Professors, Most Inspirational Faculty Member, the campus Interdisciplinary Activities Award, and the Sigma Xi Sustained Research Award. In 1997, Foley received the SIGGRAPH Steven A. Coons Award.

Andries van Dam (Ph.D., University of Pennsylvania) was the first chairman of the Computer Science Department at Brown University. Currently Thomas J. Watson, Jr. University Professor of Technology and Education and Professor of Computer Science at Brown, he is also Director of the NSF/ARPA Science and Technology Center for Computer Graphics and Scientific Visualization. His research interests include computer graphics, hypermedia systems, and workstations. He is past Chairman of the Computing Research Association, Chief Scientist at Electronic Book Technologies, Chairman of Object Power's Technical Advisory Board, and a member of Microsoft's Technical Advisory Board. A Fellow of both the IEEE Computer Society and of ACM, he is also cofounder of ACM SIGGRAPH. Coauthor of the widely used book Fundamentals of Interactive Computer Graphics with James Foley, and of Object-Oriented Programming in Pascal: A Graphical Approach, with D. Brookshire Conner and David Niguidula, he has, in addition, published over eighty papers. In 1990 van Dam received the NCGA Academic Award, in 1991, the SIGGRAPH Steven A. Coons Award, and in 1993 the ACM Karl V. Karlstrom Outstanding Educator Award.

Steven K. Feiner (Ph.D., Brown University) is Associate Professor of Computer Science at Columbia University, where he directs the Computer Graphics and User Interfaces Lab. His current research focuses on 3D user interfaces, virtual worlds, augmented reality, knowledge-based design of graphics and multimedia, animation, visualization, and hypermedia. Dr. Feiner is on the editorial boards of ACM Transactions on Graphics, IEEE Transactions on Visualizations and Computer Graphics, and Electronic Publishing, and is on the executive board of the IEEE Technical Committee on Computer Graphics. He is a member of ACM SIGGRAPH and the IEEE Computer Society. In 1991 he received an ONR Young Investigator Award. Dr. Feiner's work has been published in over fifty papers and presented in numerous talks, tutorials, and panels.

John F. Hughes (Ph.D., University of California, Berkeley) is an Assistant Professor of Computer Science at Brown University, where he codirects the computer graphics group with Andries van Dam. His research interests are in applications of mathematics to computer graphics, scientific visualization, mathematical shape description, mathematical fundamentals of computer graphics, and low-dimensional topology and geometry. He is a member of the AMS, IEEE, and ACM SIGGRAPH. His recent papers have appeared in Computer Graphics, and in Visualization Conference Proceedings. He also has a long-standing interest in the use of computer graphics in mathematics education.

0201848406AB04062001

From the Back Cover

The best-selling book on computer graphics is now available in this C-language version. All code has been converted into C, and changes through the ninth printing of the second edition have been incorporated. The book's many outstanding features continue to ensure its position as the standard computer graphics text and reference.

By uniquely combining current concepts and practical applications in computer graphics, four well-known authors provide here the most comprehensive, authoritative, and up-to-date coverage of the field. The important algorithms in 2D and 3D graphics are detailed for easy implementation, including a close look at the more subtle special cases. There is also a thorough presentation of the mathematical principles of geometric transformations and viewing.

In this book, the authors explore multiple perspectives on computer graphics: the user's, the application programmer's, the package implementor's, and the hardware designer's. For example, the issues of user-centered design are expertly addressed in three chapters on interaction techniques, dialogue design, and user interface software. Hardware concerns are examined in a chapter, contributed by Steven Molnar and Henry Fuchs, on advanced architectures for real-time, high performance graphics.

The comprehensive topic coverage includes:

• Programming with SRGP, a simple but powerful raster graphics package that combines features of Apple's QuickDraw and the MIT X Window System graphics library.
• Hierarchical, geometric modeling using SPHIGS, a simplified dialect of the 3D graphics standard PHIGS.
• Raster graphics hardware and software, including both basic and advanced algorithms for scan converting and clipping lines, polygons, conics, spline curves, and text.
• Image synthesis, including visible-surface determination, illumination and shading models, image manipulation, and antialiasing.
• Techniques for photorealistic rendering, including ray tracing and radiosity methods.
• Surface modeling with parametric polynomials, including NURBS, and solid-modeling representations such as B-reps, CSG, and octrees.
• Advanced modeling techniques such as fractals, grammar-based models, particle systems.
• Concepts of computer animation and descriptions of state-of-the-art animation systems.

Over 100 full-color plates and over 700 figures illustrate the techniques presented in the book.

0201848406B04062001

From the Inside Flap

"Interactive graphics is a field whose time has come. Until recently it was an esoteric specialty involving expensive display a hardware, substantial computer resources, and idiosyncratic software. In the last few years, however, it has benefited from the steady and sometimes even spectacular reduction in the hardware price/performance ration (E.G., personal computers for home or office with their standard graphics terminals), and from the development of high-level , device -independent graphics packages that help make graphics programming rational and straightforward. Interactive graphics is now finally ready to fulfill its promise to provide us with pictorial communication and thus to become a major facilitator of man/machine interaction." (From preface, Fundamentals of Interactive Computer Graphics, James Foley and Andries van Dam, 1982)

This assertion that computer graphics had finally arrived was made before the revolution in computer culture sparked by Apple's Macintosh and the IBM PC and its clones. Now even preschool children are comfortable with interactive-graphics techniques, such as the desktop metaphor for window manipulation and menu and icon selection with a mouse. Graphics-based user interfaces have made productive users of neophytes, and the desk without its graphics computer is increasingly rare.

At the same time that interactive graphics has become common in user interfaces and visualization of data and objects, the rendering of 3D objects has become dramatically more realistic, as evidenced by the ubiquitous computer-generated commercials and movie special effects. Techniques that were experimental in the early eighties are now standard practice, and more remarkable "photorealistic" effects are around the corner. The simpler kinds of pseudorealism, which took hours of computer time per image in the early eighties, now are done routinely at animation rates (ten or more frames/second) on personal computers. Thus "real-time" vector displays in 1981 showed moving wire-frame objects made of tens of thousands of vectors without hidden-edge removal; in 1990 real-time raster displays can show not only the same kinds of line drawings but also moving objects composed of as many as one hundred thousand triangles rendered with Gouraud or Phong shading and specular highlights and with full hidden-surface removal. The highest-performance systems provide real-time texture mapping, anitialiasing, atmospheric attenuation for fog and haze, and other advanced effects.

Graphics software standards have also advanced significantly since our first edition. The SIGGRAPH Core '79 package, on which the first edition's SGP package was based, has all but disappeared, along with direct-view storage tube and refresh vector displays. The much more powerful PHIGS package, supporting storage and editing of structure hierarchy, has become an official ANSI and ISO standard, and it is widely available for real-time geometric graphics in scientific and engineering applications, along with PHIGS+, which supports lighting, shading, curves, and surfaces. Official graphics standards complement lower-level, more efficient de facto standards, such as Apple's QuickDraw X Window System's Xlip 2D integer raster graphics package, and Silicon Graphics' GL 3D library. Also widely available are implementations of Pixar's RenderMan interface for photorealistic rendering and Post Script interpreters for hardcopy page and screen image description. Better graphics software has been used to make dramatic improvements in the "look and feel" of user interfaces, and we may expect increasing use of 3D effects, both for aesthetic reasons and for providing new metaphors for organizing and presenting, and navigating through information.

Perhaps the most important new movement in graphics is the increasing concern for modeling objects, not just for creating their pictures. Furthermore, interest is growing in describing the time-varying geometry and behavior of 3D objects. Thus graphics is increasingly concerned with simulation, animation, and a "back to physics" movement in both modeling and rendering in order to create objects that look and behave as realistically as possible.

As the tools and capabilities available become more and more sophisticated and complex, we need to be able to apply them effectively. Rendering is no longer the bottleneck. Therefore researchers are beginning to apply artificial-intelligence techniques to assist in the design of object models, in motion planning, and in the layout of effective 2D and 3D graphical presentations.

Today the frontiers of graphics are moving very rapidly, and a text that sets out to be a standard reference work must periodically be updated and expanded. This book is almost a total rewrite of the Fundamentals of Interactive Computer Graphics, and although this second edition contains nearly double the original 623 pages, we remain painfully aware of how much material we have been forced to omit.

Major differences from the first edition include the following: The vector-graphics orientation is replaced by a raster orientation. The simple 2D floating-point graphics package (SG) is replaced by two packages--SRGP and SPHIGS--that reflect the two major schools of interactive graphics programming. SRGP combines features of the QuickDraw and Xlib 2D integer raster graphics packages. SPHIGS, based on PHIGS, provides the fundamental features of a 3D floating-point package with hierarchical display lists. We explain how to do applications programming in each of these packages and who how to implement the basic clipping, scan conversion, viewing, and display list traversal algorithms that underlie these systems. User-interface issues are discussed at considerable length, both for 2D desktop metaphors and for 3D interaction devices. Coverage of modeling is expanded to include NURB (nonuniform rational B-spline) curves and surfaces, a chapter on solid modeling, and a chapter on advanced modeling techniques, such as physically based modeling, procedural models, factals, L-grammar systems, and particle systems. Increased coverage of rendering includes a detailed treatment of antialiasing and greatly expanded chapters on visible-surface determination, illumination, and shading, including physically based illumination models, ray tracing, and radiosity. Material is added on advanced raster graphics architectures and algorithms, including clipping and scan-conversion of complex primitives and simple image-processing operations, such as compositing. A brief introduction to animation is added.

This text can be used by those without prior background in graphics and only some background in Pascal programming, basic data structures and algorithms, computer architecture, and simple linear algebra. An appendix reviews the necessary mathematical foundations. The book covers enough material for a full-year course, but is partitioned into groups to make selective coverage possible. The reader, therefore, can progress through a carefully designed sequence of units, starting with simple, generally applicable fundamentals and ending with more complex and specialized subjects.

Basic Group. Chapter 1 provides a historical perspective and some fundamental issues in hardware, software, and applications. Chapters 2 and 3 describe, respectively, the use and the implementation of SRGP, a simple 2D integer graphics package. Chapter 4 introduces graphics hardware, including some hints about how to use hardware in implementing the operations described in the preceding chapters. The next two chapters, 5 and 6, introduce the ideas of transformations in the plane and 3-space, representations by matrices, the use of homogeneous coordinates unify linear and affine transformations, and the description of 3D views, including the transformations from arbitrary view volumes to canonical view volumes. Finally, Chapter 7 introduces SPHIGS, a 3D floating-point hierarchical graphics package that is a simplified version of the PHIGS standard, and describes its use in some basic modeling operations. Chapter 7 also discusses the advantages and disadvantages of the hierarchy available in PHIGS and the structure of applications that use this graphics package.

User Interface Group. Chapters 8-10 describe the current technology of interaction devices and then address the higher-level issues in user-interface design. Various popular user-interface paradigms are described and critiqued. In the final chapter user-interface software, such as window mangers, interaction technique-libraries, and user-interface management systems, is addressed.

Model Definition Group. The first two modeling chapters, 11 and 12, describe the current technologies used in geometric modeling: the representation of curves and surfaces by parametric functions, especially cubic splines, and the representation of solids by various techniques, including boundary representations and CSG models. Chapter 13 introduces the human color-vision system, various color-description systems, and conversion from one to another. This chapter also briefly addresses rules for the effective use of color.

Image Syntheses Group. Chapter 14, the first in a four-chapter sequence, describes the quest for realism from the earliest vector drawings to state-of-the-art shaded graphics. The artifacts caused by aliasing are of crucial concern in raster graphics, and this chapter discusses their causes and cures in considerable detail by introducing the Fourier transform and convolution. Chapter 15 describes a variety of strategies for visible-surface determination in enough detail to allow the reader to implement some of the most important ones. Illumination and shading algorithms are covered in detail in Chapter 16. The early part of part of this chapter discusses algorithms most commonly found in current hardware, while the remainder treats texture, shadows, transparency, reflections, physically based illumination models, rat tracing, and radiosity methods. The last chapter in this group, Chapter 17, describes both image manipulations, such as scaling, shearing, and rotating pixmaps, and image storage techniques, including various image-compression schemes.

Advanced Techniques Group. The last four chapters give an overview of the current state of the art (a moving target, of course). Chapter 18 describes advanced graphics hardware used in high-end commercial and research machines; this chapter was contributed by Steven Molnar and Henry Fuchs, authorities on high-performance graphics architectures. Chapter 19 describes the complex raster algorithms used for such tasks as scan-converting arbitary conics, generating antialiased text, and implementing page-description languages, such as PostScript. The final two chapters survey some of the most important techniques in the fields of high-level modeling and computer animation.

The first two groups cover only elementary material and thus can be used for a basic course at the undergraduate level. A follow-on course can then use the more advanced chapters. Alternatively, instructors can assemble customized courses by picking chapters out of the various groups.

For example, a course designed to introduce students to primarily 2D graphics would include Chapters 1 and 2, simple scan conversion and clipping from Chapter 3, a technology overview with emphasis on raster architectures and interaction devices from Chapter 4, homogeneous mathematics from Chapter 5, and 3D viewing only from a "how to use it" point of view from Sections 6.1 to 6.3. The User Interface Group, Chapters 8-10, would be followed by selected introductory sections and simple algorithms from the Image Syntheses Group, Chapters 14, 15, and 16.

A one-course general overview of graphics would include Chapters 1 and 2, basic algorithms from Chapter 3, raster architectures and interaction devices from Chapter 4, Chapter 5, and most of Chapters 6 and 7 on viewing and SPHIGs. The second half of the course would include sections on modeling from Chapters 11 and 13, on image syntheses from Chapters 14, 15, and 16, and on advanced modeling from Chapter 20 to give breadth of coverage in these slightly more advanced areas.

A course emphasizing 3D modeling and rendering would start with Chapter 3 sections on scan converting, clipping of lines and polygons, and introducing antialiasing. The course would then progress to Chapters 5 and 6 on the basic mathematics of transformations and viewing. Chapter 13 on color, and then cover the key Chapters 14, 15 and 16 in the Image Syntheses Group. Coverage would be rounded off by selections in surface and solid modeling. Chapter 20 on advanced modeling, and Chapter 21 on animation from the Advanced Techniques Group. Graphics Packages

The SRGP and SPHIGS graphics packages, designed by David Sklar, coauthor of the two chapters on these packages, are available from the publisher for the IBM PC (ISBN 0-201-54700-7), the Macintosh (ISBN 0-201-54701-5), and UNIX workstations running X11, as are many of the algorithms for scan conversion, clipping, and viewing (see page 1175). Acknowledgments

This book could not have been produced without the dedicated work and the indulgence of many friends and colleagues. We acknowledge here our debt to those who have contributed significantly to one or more chapters; many others have helped by commenting on individual chapters, and we are grateful to them as well. We regret any inadvertent omissions. Katrina Avery and Lyn Dupré did a superb job of editing. Additional valuable editing on multiple versions of multiple chapters was provided by Debbie van Dam, Melissa Gold, and Clare Campbell. We are especially grateful to our production supervisor Bette Aaronson, our art director, Joe Vetere, and our editor, Keith Wollman, not only for their great help in producing the book, but also for their patience and good humor under admittedly adverse circumstances--if we ever made a promised deadline during these frantic five years, we can't remember it!

Computer graphics has become too complex for even a team of four main authors and three guest authors to be expert in all areas. We relied on colleagues and students to amplify our knowledge, catch our mistakes and provide constructive criticism of form and content. We take full responsibility for any remaining sins of omission and commission. Detailed technical readings on one or more chapters were provided by John Airey, Kurt Akeley, Tom Banchoff, Brian Barsky, David Bates, Cliff Beshers, Gary Bishop, Peter J Bono, Marvin Bunker, Bill Buxton, Edward Chang, Norman Chin, Michael F. Cohen, William Cowan, John Dennis, Tom Dewald, Scott Draves, Steve Drucker, Tom Duff, Richard Economy, David Ellsworth, Nick England, Jerry Farrell, Robin Forrest, Alain Fournier, Alan Freiden, Christina Gibbs, Melissa Gold, Mark Green, Cathleen Greenberg, Margaret Hagen, Griff Hamlin, Pat Hanrahan, John Heidema, Rob Jacob, Abid Kamran, Mike Kappel, Henry Kaufman, Karen Kendler, David Kurlander, David Laidlaw, Keith Lantz, Hsien-Che Lee, Aaron Marcus, Nelson Max, Deborah Mayhew, Barbara Meier, Gary Meyer, Jim Michener, Jakob Nielsen, Mark Nodine, Randy Pausch, Ari Requicha, David Rosenthal, David Salesin, Nanan Samet, James Sanford, James Sargent, Robin Schaufler, Robert Scheifler, John Schnizlein, Michael Shantzis, Ben Shneiderman, Ken Shoemake, Judith Schrier, John Sibert, Dave Simons, Jonathan Steinhart, Maureen Stone, Paul Strauss, Seth Tager, Peter Tanner, Bruce Tebbs, Ben Trumbore, Yi Tso, Greg Turk, Jeff Vroom, Colin Ware, Gary Watkins, Chuck Weger, Kevin Weiler, Turner Whitted, George Wolberg, and Larry Wolff.

Several colleagues, including Jack Bresenham, Brian Barsky, Jerry Van Aken, Dilip Da Silva (who suggested the uniform midpoint treatment of Chapter 3) and Don Hatfield, not only read chapters closely but also provided detailed suggestions on algorithms.

Welcome word-processing relief was provided by Katrina Avery, Barbara Britten, Clare Campbell, Tina Cantor, Joyce Cavatoni, Louisa Hogan, Jenni Rodda, and Debbie van Dam. Drawings for Chapters 1-3 were ably created by Dan Robbins, Scott Snibbe, Tina Cantor, and Clare Campbell. Figure and image sequences created for this book were provided by Beth Cobb, David Kurlander, Allen Paeth, and George Wolberg (with assistance from Peter Karp). Plates II.21-37, showing a progression of rendering techniques, were designed and rendered at Pixar by Thomas Williams and H.B. Siegel, under the direction of M.W. Mantle, using Pixar's PhotoRealistic Renderman software. Thanks to Industrial Light & Magic for the use of their laser scanner to create Plates II.24-37, and to Norman Chin for computing vertex normals for Color Plates II.30-32. L. Lu and Carles Castellsagué wrote programs to make figures.

Jeff Vogel implemented the algorithms of Chapter 3, and he and Atul Butte verified the code in Chapters 2 and 7. David Sklar wrote the Mac and X11 implementations of SRGP and SPHIGS with help from Ron Balsys, Scott Boyajian, Atul Butte, Alex Contovounesios, and Scott Draves. Randy Pausch and his students ported the packages to the PC environment.

We have installed an automated electronic mail server to allow our readers to obtain machine-readable copies of many of the algorithms, suggest exercises, report errors in the text and in SRGP/SPHIGS, and obtain errata lists for the text and software. Send email to "graphtext @ cs.brown" with a Subject line of "Help" to receive the current list of available services (See page 1175 for information on how to order SRGP and SPHIGS.) Preface to the C Edition

This is the C-language version of a book originally written with examples in Pascal. It includes all changes through the ninth printing of the Pascal second edition, as well as minor modifications to several algorithms, and all it s Pascal code has been rewritten in ANSI C. The interfaces to the SRGP and SPHIGS graphics packages are now defined in C, rather than Pascal, and correspond to the new C implementations of these packages. (See page 1175 for information on obtaining the software.)

We wish to thank Norman Chin for converting the Pascal code of the second edition to C, proofreading it, and formatting it using the typographic conventions of the original. Thanks to Matt Ayers for careful proofing of Chapters 2, 3, and 7, and for useful suggestions about conversion problems.

0201848406P04062001

Excerpt. © Reprinted by permission. All rights reserved.

Preface

"Interactive graphics is a field whose time has come. Until recently it was an esoteric specialty involving expensive display a hardware, substantial computer resources, and idiosyncratic software. In the last few years, however, it has benefited from the steady and sometimes even spectacular reduction in the hardware price/performance ration (E.G., personal computers for home or office with their standard graphics terminals), and from the development of high-level , device -independent graphics packages that help make graphics programming rational and straightforward. Interactive graphics is now finally ready to fulfill its promise to provide us with pictorial communication and thus to become a major facilitator of man/machine interaction." (From preface, Fundamentals of Interactive Computer Graphics, James Foley and Andries van Dam, 1982)

This assertion that computer graphics had finally arrived was made before the revolution in computer culture sparked by Apple's Macintosh and the IBM PC and its clones. Now even preschool children are comfortable with interactive-graphics techniques, such as the desktop metaphor for window manipulation and menu and icon selection with a mouse. Graphics-based user interfaces have made productive users of neophytes, and the desk without its graphics computer is increasingly rare.

At the same time that interactive graphics has become common in user interfaces and visualization of data and objects, the rendering of 3D objects has become dramatically more realistic, as evidenced by the ubiquitous computer-generated commercials and movie special effects. Techniques that were experimental in the early eighties are now standard practice, and more remarkable "photorealistic" effects are around the corner. The simpler kinds of pseudorealism, which took hours of computer time per image in the early eighties, now are done routinely at animation rates (ten or more frames/second) on personal computers. Thus "real-time" vector displays in 1981 showed moving wire-frame objects made of tens of thousands of vectors without hidden-edge removal; in 1990 real-time raster displays can show not only the same kinds of line drawings but also moving objects composed of as many as one hundred thousand triangles rendered with Gouraud or Phong shading and specular highlights and with full hidden-surface removal. The highest-performance systems provide real-time texture mapping, anitialiasing, atmospheric attenuation for fog and haze, and other advanced effects.

Graphics software standards have also advanced significantly since our first edition. The SIGGRAPH Core '79 package, on which the first edition's SGP package was based, has all but disappeared, along with direct-view storage tube and refresh vector displays. The much more powerful PHIGS package, supporting storage and editing of structure hierarchy, has become an official ANSI and ISO standard, and it is widely available for real-time geometric graphics in scientific and engineering applications, along with PHIGS+, which supports lighting, shading, curves, and surfaces. Official graphics standards complement lower-level, more efficient de facto standards, such as Apple's QuickDraw X Window System's Xlip 2D integer raster graphics package, and Silicon Graphics' GL 3D library. Also widely available are implementations of Pixar's RenderMan interface for photorealistic rendering and Post Script interpreters for hardcopy page and screen image description. Better graphics software has been used to make dramatic improvements in the "look and feel" of user interfaces, and we may expect increasing use of 3D effects, both for aesthetic reasons and for providing new metaphors for organizing and presenting, and navigating through information.

Perhaps the most important new movement in graphics is the increasing concern for modeling objects, not just for creating their pictures. Furthermore, interest is growing in describing the time-varying geometry and behavior of 3D objects. Thus graphics is increasingly concerned with simulation, animation, and a "back to physics" movement in both modeling and rendering in order to create objects that look and behave as realistically as possible.

As the tools and capabilities available become more and more sophisticated and complex, we need to be able to apply them effectively. Rendering is no longer the bottleneck. Therefore researchers are beginning to apply artificial-intelligence techniques to assist in the design of object models, in motion planning, and in the layout of effective 2D and 3D graphical presentations. Today the frontiers of graphics are moving very rapidly, and a text that sets out to be a standard reference work must periodically be updated and expanded. This book is almost a total rewrite of the Fundamentals of Interactive Computer Graphics, and although this second edition contains nearly double the original 623 pages, we remain painfully aware of how much material we have been forced to omit.

Major differences from the first edition include the following: The vector-graphics orientation is replaced by a raster orientation. The simple 2D floating-point graphics package (SG) is replaced by two packages--SRGP and SPHIGS--that reflect the two major schools of interactive graphics programming. SRGP combines features of the QuickDraw and Xlib 2D integer raster graphics packages. SPHIGS, based on PHIGS, provides the fundamental features of a 3D floating-point package with hierarchical display lists. We explain how to do applications programming in each of these packages and who how to implement the basic clipping, scan conversion, viewing, and display list traversal algorithms that underlie these systems. User-interface issues are discussed at considerable length, both for 2D desktop metaphors and for 3D interaction devices. Coverage of modeling is expanded to include NURB (nonuniform rational B-spline) curves and surfaces, a chapter on solid modeling, and a chapter on advanced modeling techniques, such as physically based modeling, procedural models, factals, L-grammar systems, and particle systems. Increased coverage of rendering includes a detailed treatment of antialiasing and greatly expanded chapters on visible-surface determination, illumination, and shading, including physically based illumination models, ray tracing, and radiosity. Material is added on advanced raster graphics architectures and algorithms, including clipping and scan-conversion of complex primitives and simple image-processing operations, such as compositing. A brief introduction to animation is added.

This text can be used by those without prior background in graphics and only some background in Pascal programming, basic data structures and algorithms, computer architecture, and simple linear algebra. An appendix reviews the necessary mathematical foundations. The book covers enough material for a full-year course, but is partitioned into groups to make selective coverage possible. The reader, therefore, can progress through a carefully designed sequence of units, starting with simple, generally applicable fundamentals and ending with more complex and specialized subjects.

Basic Group. Chapter 1 provides a historical perspective and some fundamental issues in hardware, software, and applications. Chapters 2 and 3 describe, respectively, the use and the implementation of SRGP, a simple 2D integer graphics package. Chapter 4 introduces graphics hardware, including some hints about how to use hardware in implementing the operations described in the preceding chapters. The next two chapters, 5 and 6, introduce the ideas of transformations in the plane and 3-space, representations by matrices, the use of homogeneous coordinates unify linear and affine transformations, and the description of 3D views, including the transformations from arbitrary view volumes to canonical view volumes. Finally, Chapter 7 introduces SPHIGS, a 3D floating-point hierarchical graphics package that is a simplified version of the PHIGS standard, and describes its use in some basic modeling operations. Chapter 7 also discusses the advantages and disadvantages of the hierarchy available in PHIGS and the structure of applications that use this graphics package.

User Interface Group. Chapters 8-10 describe the current technology of interaction devices and then address the higher-level issues in user-interface design. Various popular user-interface paradigms are described and critiqued. In the final chapter user-interface software, such as window mangers, interaction technique-libraries, and user-interface management systems, is addressed.

Model Definition Group. The first two modeling chapters, 11 and 12, describe the current technologies used in geometric modeling: the representation of curves and surfaces by parametric functions, especially cubic splines, and the representation of solids by various techniques, including boundary representations and CSG models. Chapter 13 introduces the human color-vision system, various color-description systems, and conversion from one to another. This chapter also briefly addresses rules for the effective use of color.

Image Syntheses Group. Chapter 14, the first in a four-chapter sequence, describes the quest for realism from the earliest vector drawings to state-of-the-art shaded graphics. The artifacts caused by aliasing are of crucial concern in raster graphics, and this chapter discusses their causes and cures in considerable detail by introducing the Fourier transform and convolution. Chapter 15 describes a variety of strategies for visible-surface determination in enough detail to allow the reader to implement some of the most important ones. Illumination and shading algorithms are covered in detail in Chapter 16. The early part of part of this chapter discusses algorithms most commonly found in current hardware, while the remainder treats texture, shadows, transparency, reflections, physically based illumination models, rat tracing, and radiosity methods. The last chapter in this group, Chapter 17, describes both image manipulations, such as scaling, shearing, and rotating pixmaps, and image storage techniques, including various image-compression schemes.

Advanced Techniques Group. The last four chapters give an overview of the current state of the art (a moving target, of course). Chapter 18 describes advanced graphics hardware used in high-end commercial and research machines; this chapter was contributed by Steven Molnar and Henry Fuchs, authorities on high-performance graphics architectures. Chapter 19 describes the complex raster algorithms used for such tasks as scan-converting arbitary conics, generating antialiased text, and implementing page-description languages, such as PostScript. The final two chapters survey some of the most important techniques in the fields of high-level modeling and computer animation.

The first two groups cover only elementary material and thus can be used for a basic course at the undergraduate level. A follow-on course can then use the more advanced chapters. Alternatively, instructors can assemble customized courses by picking chapters out of the various groups.

For example, a course designed to introduce students to primarily 2D graphics would include Chapters 1 and 2, simple scan conversion and clipping from Chapter 3, a technology overview with emphasis on raster architectures and interaction devices from Chapter 4, homogeneous mathematics from Chapter 5, and 3D viewing only from a "how to use it" point of view from Sections 6.1 to 6.3. The User Interface Group, Chapters 8-10, would be followed by selected introductory sections and simple algorithms from the Image Syntheses Group, Chapters 14, 15, and 16.

A one-course general overview of graphics would include Chapters 1 and 2, basic algorithms from Chapter 3, raster architectures and interaction devices from Chapter 4, Chapter 5, and most of Chapters 6 and 7 on viewing and SPHIGs. The second half of the course would include sections on modeling from Chapters 11 and 13, on image syntheses from Chapters 14, 15, and 16, and on advanced modeling from Chapter 20 to give breadth of coverage in these slightly more advanced areas.

A course emphasizing 3D modeling and rendering would start with Chapter 3 sections on scan converting, clipping of lines and polygons, and introducing antialiasing. The course would then progress to Chapters 5 and 6 on the basic mathematics of transformations and viewing. Chapter 13 on color, and then cover the key Chapters 14, 15 and 16 in the Image Syntheses Group. Coverage would be rounded off by selections in surface and solid modeling. Chapter 20 on advanced modeling, and Chapter 21 on animation from the Advanced Techniques Group.

Graphics Packages

The SRGP and SPHIGS graphics packages, designed by David Sklar, coauthor of the two chapters on these packages, are available from the publisher for the IBM PC (ISBN 0-201-54700-7), the Macintosh (ISBN 0-201-54701-5), and UNIX workstations running X11, as are many of the algorithms for scan conversion, clipping, and viewing (see page 1175).

Acknowledgments

This book could not have been produced without the dedicated work and the indulgence of many friends and colleagues. We acknowledge here our debt to those who have contributed significantly to one or more chapters; many others have helped by commenting on individual chapters, and we are grateful to them as well. We regret any inadvertent omissions. Katrina Avery and Lyn Dupr did a superb job of editing. Additional valuable editing on multiple versions of multiple chapters was provided by Debbie van Dam, Melissa Gold, and Clare Campbell. We are especially grateful to our production supervisor Bette Aaronson, our art director, Joe Vetere, and our editor, Keith Wollman, not only for their great help in producing the book, but also for their patience and good humor under admittedly adverse circumstances--if we ever made a promised deadline during these frantic five years, we can't remember it!

Computer graphics has become too complex for even a team of four main authors and three guest authors to be expert in all areas. We relied on colleagues and students to amplify our knowledge, catch our mistakes and provide constructive criticism of form and content. We take full responsibility for any remaining sins of omission and commission. Detailed technical readings on one or more chapters were provided by John Airey, Kurt Akeley, Tom Banchoff, Brian Barsky, David Bates, Cliff Beshers, Gary Bishop, Peter J Bono, Marvin Bunker, Bill Buxton, Edward Chang, Norman Chin, Michael F. Cohen, William Cowan, John Dennis, Tom Dewald, Scott Draves, Steve Drucker, Tom Duff, Richard Economy, David Ellsworth, Nick England, Jerry Farrell, Robin Forrest, Alain Fournier, Alan Freiden, Christina Gibbs, Melissa Gold, Mark Green, Cathleen Greenberg, Margaret Hagen, Griff Hamlin, Pat Hanrahan, John Heidema, Rob Jacob, Abid Kamran, Mike Kappel, Henry Kaufman, Karen Kendler, David Kurlander, David Laidlaw, Keith Lantz, Hsien-Che Lee, Aaron Marcus, Nelson Max, Deborah Mayhew, Barbara Meier, Gary Meyer, Jim Michener, Jakob Nielsen, Mark Nodine, Randy Pausch, Ari Requicha, David Rosenthal, David Salesin, Nanan Samet, James Sanford, James Sargent, Robin Schaufler, Robert Scheifler, John Schnizlein, Michael Shantzis, Ben Shneiderman, Ken Shoemake, Judith Schrier, John Sibert, Dave Simons, Jonathan Steinhart, Maureen Stone, Paul Strauss, Seth Tager, Peter Tanner, Bruce Tebbs, Ben Trumbore, Yi Tso, Greg Turk, Jeff Vroom, Colin Ware, Gary Watkins, Chuck Weger, Kevin Weiler, Turner Whitted, George Wolberg, and Larry Wolff.

Several colleagues, including Jack Bresenham, Brian Barsky, Jerry Van Aken, Dilip Da Silva (who suggested the uniform midpoint treatment of Chapter 3) and Don Hatfield, not only read chapters closely but also provided detailed suggestions on algorithms. Welcome word-processing relief was provided by Katrina Avery, Barbara Britten, Clare Campbell, Tina Cantor, Joyce Cavatoni, Louisa Hogan, Jenni Rodda, and Debbie van Dam. Drawings for Chapters 1-3 were ably created by Dan Robbins, Scott Snibbe, Tina Cantor, and Clare Campbell. Figure and image sequences created for this book were provided by Beth Cobb, David Kurlander, Allen Paeth, and George Wolberg (with assistance from Peter Karp). Plates II.21-37, showing a progression of rendering techniques, were designed and rendered at Pixar by Thomas Williams and H.B. Siegel, under the direction of M.W. Mantle, using Pixar's PhotoRealistic Renderman software. Thanks to Industrial Light & Magic for the use of their laser scanner to create Plates II.24-37, and to Norman Chin for computing vertex normals for Color Plates II.30-32. L. Lu and Carles Castellsagu wrote programs to make figures.

Jeff Vogel implemented the algorithms of Chapter 3, and he and Atul Butte verified the code in Chapters 2 and 7. David Sklar wrote the Mac and X11 implementations of SRGP and SPHIGS with help from Ron Balsys, Scott Boyajian, Atul Butte, Alex Contovounesios, and Scott Draves. Randy Pausch and his students ported the packages to the PC environment.

We have installed an automated electronic mail server to allow our readers to obtain machine-readable copies of many of the algorithms, suggest exercises, report errors in the text and in SRGP/SPHIGS, and obtain errata lists for the text and software. Send email to "graphtext @ cs.brown.edu" with a Subject line of "Help" to receive the current list of available services (See page 1175 for information on how to order SRGP and SPHIGS.)

Preface to the C Edition

This is the C-language version of a book originally written with examples in Pascal. It includes all changes through the ninth printing of the Pascal second edition, as well as minor modifications to several algorithms, and all it s Pascal code has been rewritten in ANSI C. The interfaces to the SRGP and SPHIGS graphics packages are now defined in C, rather than Pascal, and correspond to the new C implementations of these packages. (See page 1175 for information on obtaining the software.)

We wish to thank Norman Chin for converting the Pascal code of the second edition to C, proofreading it, and formatting it using the typographic conventions of the original. Thanks to Matt Ayers for careful proofing of Chapters 2, 3, and 7, and for useful suggestions about conversion problems.

Edition details

• Publisher: Addison-Wesley Professional
• Publication date: 1995
• ISBN 10: 0201848406
• ISBN 13: 9780201848403
• Binding: Hardcover
• Language: English
• Edition number: 2
• Number of pages: 1175
• Editor: Foley James D.