Hazard Analysis Techniques for System Safety - Hardcover

Ericson II, Clifton A.

Hardcover

ISBN 10: 0471720194 ISBN 13: 9780471720195

Publisher: Wiley-Interscience, 2005

Synopsis

A practical guide to identifying hazards using common hazard analysis techniques

Many different hazard analysis techniques have been developed over the past forty years. However, there is only a handful of techniques that safety analysts actually apply in their daily work. Written by a former president of the System Safety Society and winner of the Boeing Achievement and Apollo Awards for his safety analysis work, Hazard Analysis Techniques for System Safety explains, in detail, how to perform the most commonly used hazard analysis techniques employed by the system safety engineering discipline.

Focusing on the twenty-two most commonly used hazard analysis methodologies in the system safety discipline, author Clifton Ericson outlines the three components that comprise a hazard and describes how to use these components to recognize a hazard during analysis. He then examines each technique in sufficient detail and with numerous illustrations and examples, to enable the reader to easily understand and perform the analysis.

Techniques covered include:
* Preliminary Hazard List (PHL) Analysis
* Preliminary Hazard Analysis (PHA)
* Subsystem Hazard Analysis (SSHA)
* System Hazard Analysis (SHA)
* Operating and Support Hazard Analysis (O&SHA)
* Health Hazard Assessment (HHA)
* Safety Requirements/Criteria Analysis (SRCA)
* Fault Tree Analysis (FTA)
* Event Tree Analysis (ETA)
* Failure Mode and Effects Analysis (FMEA)
* Fault Hazard Analysis
* Functional Hazard Analysis
* Sneak Circuit Analysis (SCA)
* Petri Net Analysis (PNA)
* Markov Analysis (MA)
* Barrier Analysis (BA)
* Bent Pin Analysis (BPA)
* HAZOP Analysis
* Cause Consequence Analysis (CCA)
* Common Cause Failure Analysis (CCFA)
* MORT Analysis
* Software Safety Assessment (SWSA)

Written to be accessible to readers with a minimal amount of technical background, Hazard Analysis Techniques for System Safety gathers, for the first time in one source, the techniques that safety analysts actually apply in daily practice. Both new and seasoned analysts will find this book an invaluable resource for designing and constructing safe systems-- in short, for saving lives.

About this title

About the Author

CLIFTON A. ERICSON II works for EG&G Technical Services, Inc., as a project manager for system safety and software safety. Mr. Ericson previously spent thirty-five years at Boeing, where, in 2000, he won the Apollo Award for fault tree training on the International Space Station and the Boeing Achievement Award for developing the Boeing Fault Tree Analysis course. He wrote a Navy manual on system safety for the Naval Ordnance Safety and Security Activity (NOSSA) and also manages several system/software safety projects. Mr. Ericson was president (2001–2003) and executive vice president (1999–2001) of the System Safety Society. He is on the technical review committee for the Journal of System Safety, cochaired the Sixteenth International System Safety Conference, and founded the Puget Sound chapter (Seattle) of the System Safety Society. In 1998, 1999, and 2004, he won the System Safety Society's President Award for outstanding work in system safety.

From the Back Cover

A practical guide to identifying hazards using common hazard analysis techniques

Many different hazard analysis techniques have been developed over the past forty years. However, there is only a handful of techniques that safety analysts actually apply in their daily work. Written by a former president of the System Safety Society and winner of the Boeing Achievement and Apollo Awards for his safety analysis work, Hazard Analysis Techniques for System Safety explains, in detail, how to perform the most commonly used hazard analysis techniques employed by the system safety engineering discipline.

Focusing on the twenty-two most commonly used hazard analysis methodologies in the system safety discipline, author Clifton Ericson outlines the three components that comprise a hazard and describes how to use these components to recognize a hazard during analysis. He then examines each technique in sufficient detail and with numerous illustrations and examples, to enable the reader to easily understand and perform the analysis.

Techniques covered include:

• Preliminary Hazard List (PHL) Analysis
• Preliminary Hazard Analysis (PHA)
• Subsystem Hazard Analysis (SSHA)
• System Hazard Analysis (SHA)
• Operating and Support Hazard Analysis (O&SHA)
• Health Hazard Assessment (HHA)
• Safety Requirements/Criteria Analysis (SRCA)
• Fault Tree Analysis (FTA)
• Event Tree Analysis (ETA)
• Failure Mode and Effects Analysis (FMEA)
• Fault Hazard Analysis
• Functional Hazard Analysis
• Sneak Circuit Analysis (SCA)
• Petri Net Analysis (PNA)
• Markov Analysis (MA)
• Barrier Analysis (BA)
• Bent Pin Analysis (BPA)
• HAZOP Analysis
• Cause Consequence Analysis (CCA)
• Common Cause Failure Analysis (CCFA)
• MORT Analysis
• Software Safety Assessment (SWSA)

Written to be accessible to readers with a minimal amount of technical background, Hazard Analysis Techniques for System Safety gathers, for the first time in one source, the techniques that safety analysts actually apply in daily practice. Both new and seasoned analysts will find this book an invaluable resource for designing and constructing safe systems—— in short, for saving lives.

Edition details

• Publisher: Wiley-Interscience
• Publication date: 2005
• Language: English
• ISBN 10: 0471720194
• ISBN 13: 9780471720195
• Binding: Hardcover
• Edition number: 1
• Number of pages: 528