The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites. This symposium examined progress resulting from the research and development of advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide-based structural ceramics, particulate and fiber-reinforced composites, and multifunctional materials. This issue features seventeen of those papers, representing some of the most important developments in processing and manufacturing technologies.
"synopsis" may belong to another edition of this title.
Tatsuki Ohji is a Prime Senior Research Scientist of National Institute of Advanced Industrial Science and Technology (AIST) and a Designated Professor in the Graduate School of Science and Engineering, Meijo University, Japan. He has authored or coauthored more than 330 peer-reviewed papers and 12 book chapters, edited 30 book volumes, chaired or co-chaired more than 30 international conferences and symposia, and hold more than 40 patents. Fellow of the American Association for the Advancement of Science (AAAS), the American Ceramic Society and ASM International, and Academician of the World Academy of Ceramics, he has received numerous awards including ECD Bridge Building Award of the American Ceramic Society, Academic Achievement Award of the Ceramic Society of Japan, IIM Lectureship Award of ASM International, Lee Hsun Lecture Award of IMR Chinese Academy of Sciences, and Distinguished Research Achievement Award of the Japan Society of Powder and Powder Metallurgy.
Sets forth new processing and manufacturing technologies for the next generation of ceramics
The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites in Daytona Beach, Florida. This symposium examined progress resulting from the research and development of advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide-based structural ceramics, particulate and fiber-reinforced composites, and multifunctional materials.
Sixty-eight papers, including invited talks, oral presentations, and posters, were presented by researchers from around the world. This issue features seventeen of those papers, representing some of the most important developments in processing and manufacturing technologies, including:
Readers will gain a solid foundation to support further development of processing and manufacturing technologies for the next generation of ceramic materials and systems.
This issue represents one of nine CESP issues published from the 36th ICACC meeting. ICACC is the world's most prominent international meeting dedicated to advanced structural, functional, and nanoscopic ceramics, composites, and other emerging ceramic materials and technologies. ICACC has been organized each year by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division since 1977.
Sets forth new processing and manufacturing technologies for the next generation of ceramics
The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites in Daytona Beach, Florida. This symposium examined progress resulting from the research and development of advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide-based structural ceramics, particulate and fiber-reinforced composites, and multifunctional materials.
Sixty-eight papers, including invited talks, oral presentations, and posters, were presented by researchers from around the world. This issue features seventeen of those papers, representing some of the most important developments in processing and manufacturing technologies, including:
Readers will gain a solid foundation to support further development of processing and manufacturing technologies for the next generation of ceramic materials and systems.
This issue represents one of nine CESP issues published from the 36th ICACC meeting. ICACC is the world's most prominent international meeting dedicated to advanced structural, functional, and nanoscopic ceramics, composites, and other emerging ceramic materials and technologies. ICACC has been organized each year by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division since 1977.
"About this title" may belong to another edition of this title.
US$ 4.50 shipping within U.S.A.
Destination, rates & speedsSeller: Book Booth, Berea, OH, U.S.A.
Hardcover. Condition: Very Good. Like new. Pages clean & bright; binding tight; very minor wear to covers. 169 pages. Illustrated. Seventeen papers from Ceramic Engineering and Science Proceedings Volume 33, Issue 8, 2012. Size: 6 1/2" x 9 1/2". Seller Inventory # S206-050300
Quantity: 1 available
Seller: INDOO, Avenel, NJ, U.S.A.
Condition: New. Seller Inventory # 9781118205983
Quantity: Over 20 available
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Condition: New. Seller Inventory # 13310686-n
Quantity: 6 available
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Condition: As New. Unread book in perfect condition. Seller Inventory # 13310686
Quantity: 6 available
Seller: Grand Eagle Retail, Fairfield, OH, U.S.A.
Hardcover. Condition: new. Hardcover. The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites. This symposium examined progress resulting from the research and development of advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide-based structural ceramics, particulate and fiber-reinforced composites, and multifunctional materials. This issue features seventeen of those papers, representing some of the most important developments in processing and manufacturing technologies. The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Seller Inventory # 9781118205983
Quantity: 1 available
Seller: GreatBookPricesUK, Woodford Green, United Kingdom
Condition: As New. Unread book in perfect condition. Seller Inventory # 13310686
Quantity: 4 available
Seller: PBShop.store UK, Fairford, GLOS, United Kingdom
HRD. Condition: New. New Book. Shipped from UK. Established seller since 2000. Seller Inventory # FW-9781118205983
Quantity: 4 available
Seller: Majestic Books, Hounslow, United Kingdom
Condition: New. pp. xi + 169 Illus. Seller Inventory # 49831319
Quantity: 3 available
Seller: GreatBookPricesUK, Woodford Green, United Kingdom
Condition: New. Seller Inventory # 13310686-n
Quantity: 4 available
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. In. Seller Inventory # ria9781118205983_new
Quantity: 4 available