Synopsis
This is a practical guide to injection molding based on sound engineering fundamentals. It is an ideal course book for mechanical engineers with limited plastic material and injection molding experience, but is also well applicable to self-study or reference.
It starts with an overview of plastic material fundamentals. Each section includes material considerations associated with the injection molding process. For example, the molecular weight section shows that use of lower molecular weight plastics are commonly used for the injection molding to minimize orientation, reduce fill time, improve knit line strength. Then, the basics of the injection molding machine, tooling, auxiliary equipment and molding process are introduced. The machine components and component selection for a given application are next considered in more detail.
The process/procedure for establishing optimum process conditions for a “new” mold and material (not run previously by the reader) are next described. Finally, a range of other more specialized injection molding processes that are still of practical importance are covered.
From a leading author and educator in the area of injection molding, this book gives engineers and process technicians the knowledge and confidence they need to produce high-quality parts reliably and efficiently.
"synopsis" may belong to another edition of this title.
About the Author
Dr. Robert Malloy is Professor Emeritus and former Chair of the Plastics Engineering Department at the University of Massachusetts Lowell. He is an active researcher and consultant in the areas of plastics processing, design, and recycling. Dr. Malloy is the author of many publications and patents, including a textbook on the subject of plastic part design. Prior to joining the faculty at Lowell, he was an instructor at the Algerian Petroleum Institute in Annaba, Algeria.
"About this title" may belong to another edition of this title.
Search results for Plastic Injection Molding
Stock Image
Plastic Injection Molding
Seller: PBShop.store UK, Fairford, GLOS, United Kingdom
Seller rating 5 out of 5 stars
HRD. Condition: New. New Book. Shipped from UK. Established seller since 2000. Seller Inventory # DB-9781569908792
Buy New
US$ 104.66
US$ 6.76 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 3 available
Stock Image
Plastic Injection Molding
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 47730464-n
Stock Image
Plastic Injection Molding
Seller: California Books, Miami, FL, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # I-9781569908792
Stock Image
Plastic Injection Molding (Hardcover)
Print on DemandSeller: Grand Eagle Retail, Bensenville, IL, U.S.A.
Seller rating 5 out of 5 stars
Hardcover. Condition: new. Hardcover. This is a practical guide to injection molding based on sound engineering fundamentals. It is an ideal course book for mechanical engineers with limited plastic material and injection molding experience, but is also well applicable to self-study or reference. It starts with an overview of plastic material fundamentals. Each section includes material considerations associated with the injection molding process. For example, the molecular weight section shows that use of lower molecular weight plastics are commonly used for the injection molding to minimize orientation, reduce fill time, improve knit line strength. Then, the basics of the injection molding machine, tooling, auxiliary equipment and molding process are introduced. The machine components and component selection for a given application are next considered in more detail.The process/procedure for establishing optimum process conditions for a "new" mold and material (not run previously by the reader) are next described. Finally, a range of other more specialized injection molding processes that are still of practical importance are covered.From a leading author and educator in the area of injection molding, this book gives engineers and process technicians the knowledge and confidence they need to produce high-quality parts reliably and efficiently. A practical guide to injection molding based on sound engineering fundamentals. From a leading author and educator in the area of injection molding, this book gives mechanical engineers and process technicians the knowledge and confidence they need to produce high-quality parts reliably and efficiently. This item is printed on demand. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Seller Inventory # 9781569908792
Stock Image
Plastic Injection Molding
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: As New. Unread book in perfect condition. Seller Inventory # 47730464
Seller Image
Plastic Injection Molding
Published by
Hanser Fachbuchverlag Nov 2025, 2025
ISBN 10: 1569908796
ISBN 13: 9781569908792
New
Hardcover
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. Neuware -This is a practical guide to injection molding based on sound engineering fundamentals. It is an ideal course book for mechanical engineers with limited plastic material and injection molding experience, but is also well applicable to self-study or reference. It starts with an overview of plastic material fundamentals. Each section includes material considerations associated with the injection molding process. For example, the molecular weight section shows that use of lower molecular weight plastics are commonly used for the injection molding to minimize orientation, reduce fill time, improve knit line strength. Then, the basics of the injection molding machine, tooling, auxiliary equipment and molding process are introduced. The machine components and component selection for a given application are next considered in more detail.The process/procedure for establishing optimum process conditions for a 'new' mold and material (not run previously by the reader) are next described. Finally, a range of other more specialized injection molding processes that are still of practical importance are covered.From a leading author and educator in the area of injection molding, this book gives engineers and process technicians the knowledge and confidence they need to produce high-quality parts reliably and efficiently. 333 pp. Englisch. Seller Inventory # 9781569908792
Buy New
US$ 120.98
US$ 27.02 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 2 available
Seller Image
Plastic Injection Molding
Published by
Hanser Fachbuchverlag Nov 2025, 2025
ISBN 10: 1569908796
ISBN 13: 9781569908792
New
Hardcover
Seller: Rheinberg-Buch Andreas Meier eK, Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. Neuware -This is a practical guide to injection molding based on sound engineering fundamentals. It is an ideal course book for mechanical engineers with limited plastic material and injection molding experience, but is also well applicable to self-study or reference. It starts with an overview of plastic material fundamentals. Each section includes material considerations associated with the injection molding process. For example, the molecular weight section shows that use of lower molecular weight plastics are commonly used for the injection molding to minimize orientation, reduce fill time, improve knit line strength. Then, the basics of the injection molding machine, tooling, auxiliary equipment and molding process are introduced. The machine components and component selection for a given application are next considered in more detail.The process/procedure for establishing optimum process conditions for a 'new' mold and material (not run previously by the reader) are next described. Finally, a range of other more specialized injection molding processes that are still of practical importance are covered.From a leading author and educator in the area of injection molding, this book gives engineers and process technicians the knowledge and confidence they need to produce high-quality parts reliably and efficiently. 333 pp. Englisch. Seller Inventory # 9781569908792
Buy New
US$ 120.98
US$ 27.02 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 2 available
Seller Image
Plastic Injection Molding
Published by
Hanser Fachbuchverlag Nov 2025, 2025
ISBN 10: 1569908796
ISBN 13: 9781569908792
New
Hardcover
Seller: Wegmann1855, Zwiesel, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. Neuware -This is a practical guide to injection molding based on sound engineering fundamentals. It is an ideal course book for mechanical engineers with limited plastic material and injection molding experience, but is also well applicable to self-study or reference.It starts with an overview of plastic material fundamentals. Each section includes material considerations associated with the injection molding process. For example, the molecular weight section shows that use of lower molecular weight plastics are commonly used for the injection molding to minimize orientation, reduce fill time, improve knit line strength. Then, the basics of the injection molding machine, tooling, auxiliary equipment and molding process are introduced. The machine components and component selection for a given application are next considered in more detail.The process/procedure for establishing optimum process conditions for a 'new' mold and material (not run previously by the reader) are next described. Finally, a range of other more specialized injection molding processes that are still of practical importance are covered.From a leading author and educator in the area of injection molding, this book gives engineers and process technicians the knowledge and confidence they need to produce high-quality parts reliably and efficiently. Seller Inventory # 9781569908792
Buy New
US$ 120.98
US$ 30.48 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 2 available
Stock Image
Plastic Injection Molding
Seller: GreatBookPricesUK, Woodford Green, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 47730464-n
Buy New
US$ 133.75
US$ 20.20 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 3 available
Stock Image
Plastic Injection Molding: A Practical Guide
Seller: THE SAINT BOOKSTORE, Southport, United Kingdom
Seller rating 5 out of 5 stars
Hardback. Condition: New. New copy - Usually dispatched within 4 working days. Seller Inventory # B9781569908792
Buy New
US$ 133.78
US$ 21.56 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 3 available