## Designing with Creo Parametric 2.0

### Michael Rider

3 avg rating
( 1 ratings by Goodreads )

View all copies of this ISBN edition:

Designing with Creo Parametric 2.0 provides the high school student, college student, or practicing engineer with a basic introduction to engineering design while learning the 3D modeling Computer-Aided Design software called Creo Parametric from PTC. The topics are presented in tutorial format with exercises at the end of each chapter to reinforce the concepts covered. It is richly illustrated with computer screen shots throughout. Above all, this text is designed to help the reader expand their creative talents and communicate their ideas through the graphics language.

Because it is easier to learn new information if you have a reason for learning it, this textbook discusses design intent while you are learning Creo Parametric. At the same time, it shows how knowledge covered in basic engineering courses such as statics, dynamics, strength of materials, and design of mechanical components can be applied to design. You do not need an engineering degree nor be working toward a degree in engineering to use this textbook. Although FEA (Finite Element Analysis) is used in this textbook, its theory is not covered.

The first two chapters of this book describe the design process. The meat of this text, learning the basic Creo Parametric software, is found in Chapters 3 through 6. Chapters 7, 8, and 12 deal with dimensioning and tolerancing an engineering part. Chapters 9 and 10 deal with assemblies and assembly drawings. Chapter 11 deals with family tables used when similar parts are to be designed or used. Chapter 13 is an introduction to Creo Simulate and FEA.

1. Computer Aided Design
2. Introduction
3. Sketcher
4. Extrusions
5. Revolves
6. Patterns
7. Dimensioning
8. Engineering Drawings
9. Assemblies
10. Assembly Drawings
11. Relations and Family Tables
12. Tolerancing and GD&T
13. Creo Simulate and FEA
Appendix A: Parameters for Drawing
Appendix B: Drill and Tap Chart
Appendix C: Surface Roughness Chart
Appendix D: Clevis Pin Sizes
Appendix E: Number and Letter Drill Sizes
Appendix F: Square and Flat Key Sizes
Appendix G: Screw Sizes
Appendix H: Nut Sizes
Appendix I: Setscrew Sizes
Appendix J: Washer Sizes
Appendix K: Retaining Ring Sizes
Appendix L: Basic Hole Tolerance
Appendix M: Basic Shaft Tolerance
Appendix N: Tolerance Zones
References
Index

"synopsis" may belong to another edition of this title.

List Price: US\$ 75.00
US\$ 45.87

Shipping: FREE
Within U.S.A.

Destination, rates & speeds

## 1.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New Perfect Paperback Quantity Available: 2
Seller:
Murray Media
(North Miami Beach, FL, U.S.A.)
Rating

Book Description SDC Publications, 2013. Perfect Paperback. Condition: New. Never used!. Seller Inventory # P11158503827X

US\$ 45.87
Convert currency
Shipping: FREE
Within U.S.A.
Destination, rates & speeds

## 2.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New Softcover Quantity Available: 1
Seller:
Irish Booksellers
(Portland, ME, U.S.A.)
Rating

Book Description SDC Publications, 2013. Condition: New. book. Seller Inventory # M158503827X

US\$ 54.94
Convert currency
Shipping: US\$ 3.27
Within U.S.A.
Destination, rates & speeds

## 3.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New Softcover Quantity Available: 1
Seller:
Irish Booksellers
(Portland, ME, U.S.A.)
Rating

Book Description SDC Publications, 2013. Condition: New. book. Seller Inventory # MB00N4EH8X6

US\$ 54.94
Convert currency
Shipping: US\$ 3.27
Within U.S.A.
Destination, rates & speeds

## 4.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New Perfect Paperback Quantity Available: 2
Seller:
Save With Sam
(North Miami, FL, U.S.A.)
Rating

Book Description SDC Publications, 2013. Perfect Paperback. Condition: New. Brand New!. Seller Inventory # VIB158503827X

US\$ 57.12
Convert currency
Shipping: US\$ 3.00
Within U.S.A.
Destination, rates & speeds

## 5.Designing with Creo Parametric 2.0 (Paperback)

ISBN 10: 158503827X ISBN 13: 9781585038275
New Paperback Quantity Available: 1
Seller:
Book Depository International
(London, United Kingdom)
Rating

Book Description SDC Publications, United States, 2013. Paperback. Condition: New. Language: English . Brand New Book. Designing with Creo Parametric 2.0 provides the high school student, college student, or practicing engineer with a basic introduction to engineering design while learning the 3D modeling Computer-Aided Design software called Creo Parametric from PTC. The topics are presented in tutorial format with exercises at the end of each chapter to reinforce the concepts covered. It is richly illustrated with computer screen shots throughout. Above all, this text is designed to help the reader expand their creative talents and communicate their ideas through the graphics language. Because it is easier to learn new information if you have a reason for learning it, this textbook discusses design intent while you are learning Creo Parametric. At the same time, it shows how knowledge covered in basic engineering courses such as statics, dynamics, strength of materials, and design of mechanical components can be applied to design. You do not need an engineering degree nor be working toward a degree in engineering to use this textbook. Although FEA (Finite Element Analysis) is used in this textbook, its theory is not covered. The first two chapters of this book describe the design process. The meat of this text, learning the basic Creo Parametric software, is found in Chapters 3 through 6. Chapters 7, 8, and 12 deal with dimensioning and tolerancing an engineering part. Chapters 9 and 10 deal with assemblies and assembly drawings. Chapter 11 deals with family tables used when similar parts are to be designed or used. Chapter 13 is an introduction to Creo Simulate and FEA. Seller Inventory # AA69781585038275

US\$ 72.54
Convert currency
Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

## 6.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New paperback Quantity Available: 1
Seller:
Blackwell's
(Oxford, OX, United Kingdom)
Rating

Book Description CRC Press 2013-05-06, 2013. paperback. Condition: New. Seller Inventory # 9781585038275

US\$ 66.12
Convert currency
Shipping: US\$ 7.63
From United Kingdom to U.S.A.
Destination, rates & speeds

## 7.Designing with Creo Parametric 2.0 (Paperback)

ISBN 10: 158503827X ISBN 13: 9781585038275
New Paperback Quantity Available: 1
Seller:
The Book Depository
(London, United Kingdom)
Rating

Book Description SDC Publications, United States, 2013. Paperback. Condition: New. Language: English . Brand New Book. Designing with Creo Parametric 2.0 provides the high school student, college student, or practicing engineer with a basic introduction to engineering design while learning the 3D modeling Computer-Aided Design software called Creo Parametric from PTC. The topics are presented in tutorial format with exercises at the end of each chapter to reinforce the concepts covered. It is richly illustrated with computer screen shots throughout. Above all, this text is designed to help the reader expand their creative talents and communicate their ideas through the graphics language. Because it is easier to learn new information if you have a reason for learning it, this textbook discusses design intent while you are learning Creo Parametric. At the same time, it shows how knowledge covered in basic engineering courses such as statics, dynamics, strength of materials, and design of mechanical components can be applied to design. You do not need an engineering degree nor be working toward a degree in engineering to use this textbook. Although FEA (Finite Element Analysis) is used in this textbook, its theory is not covered. The first two chapters of this book describe the design process. The meat of this text, learning the basic Creo Parametric software, is found in Chapters 3 through 6. Chapters 7, 8, and 12 deal with dimensioning and tolerancing an engineering part. Chapters 9 and 10 deal with assemblies and assembly drawings. Chapter 11 deals with family tables used when similar parts are to be designed or used. Chapter 13 is an introduction to Creo Simulate and FEA. Seller Inventory # AA69781585038275

US\$ 74.40
Convert currency
Shipping: FREE
From United Kingdom to U.S.A.
Destination, rates & speeds

## 8.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New Paperback Quantity Available: 4
Seller:
THE SAINT BOOKSTORE
(Southport, United Kingdom)
Rating

Book Description SDC Publications. Paperback. Condition: New. New copy - Usually dispatched within 2 working days. Seller Inventory # B9781585038275

US\$ 65.62
Convert currency
Shipping: US\$ 8.83
From United Kingdom to U.S.A.
Destination, rates & speeds

## 9.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New Perfect Paperback Quantity Available: 1
Seller:
Ergodebooks
(RICHMOND, TX, U.S.A.)
Rating

Book Description SDC Publications, 2013. Perfect Paperback. Condition: New. Seller Inventory # DADAX158503827X

US\$ 70.74
Convert currency
Shipping: US\$ 3.99
Within U.S.A.
Destination, rates & speeds

## 10.Designing with Creo Parametric 2.0

ISBN 10: 158503827X ISBN 13: 9781585038275
New Quantity Available: 4
Seller:
Books2Anywhere
(Fairford, GLOS, United Kingdom)
Rating

Book Description CRC Press, 2013. PAP. Condition: New. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Seller Inventory # FT-9781585038275