Randy Shih Learning Autodesk Inventor 2016

ISBN 13: 9781585039661

Learning Autodesk Inventor 2016

0 avg rating
( 0 ratings by Goodreads )
 
9781585039661: Learning Autodesk Inventor 2016

This book will teach you everything you need to know to start using Autodesk Inventor 2016 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. An unassembled version of the same robot used throughout the book can be bundled with the book.

No previous experience with Computer Aided Design(CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the Inventor interface and its basic tools. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings.

Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of Inventor's powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using Autodesk Inventor.

This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts.

In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action.

There are many books that show you how to perform individual tasks with Autodesk Inventor, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA Mechanical Tiger and can start building your own robot.

Table of Contents

  1. Introduction - Getting Started
  2. Parametric Modeling Fundamentals
  3. CSG Concepts and Model History Tree
  4. Parametric Constraints Fundamentals
  5. Pictorials and Sketching
  6. Symmetrical Features and Part Drawings
  7. Datum Features in Designs
  8. Gear Generator and Content Center
  9. Advanced 3D Construction Tools
  10. Planar Linkage Analysis using GeoGebra
  11. Design Makes the Difference
  12. Assembly Modeling and Motion Analysis
    Index

"synopsis" may belong to another edition of this title.

Top Search Results from the AbeBooks Marketplace

1.

Shih, Randy
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Quantity Available: 1
Seller:
GreatBookPrices
(Columbia, MD, U.S.A.)
Rating
[?]

Book Description Book Condition: New. Bookseller Inventory # 24063413-n

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 56.60
Convert Currency

Add to Basket

Shipping: US$ 2.64
Within U.S.A.
Destination, Rates & Speeds

2.

Shih, Randy
Published by Schroff Development Corp (2015)
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Quantity Available: 1
Seller:
Paperbackshop-US
(Wood Dale, IL, U.S.A.)
Rating
[?]

Book Description Schroff Development Corp, 2015. PAP. Book Condition: New. New Book. Shipped from US within 10 to 14 business days. Established seller since 2000. Bookseller Inventory # KB-9781585039661

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 55.26
Convert Currency

Add to Basket

Shipping: US$ 3.99
Within U.S.A.
Destination, Rates & Speeds

3.

Shih, Randy
Published by SDC Publications
ISBN 10: 1585039667 ISBN 13: 9781585039661
New PERFECT PAPERBACK Quantity Available: 1
Seller:
Textbookplaza
(Sugar land, TX, U.S.A.)
Rating
[?]

Book Description SDC Publications. PERFECT PAPERBACK. Book Condition: New. 1585039667 New and in great condition with no missing or damaged pages. Need it urgently? Upgrade to Expedited. In stock and we ship daily on weekdays & Saturdays. Bookseller Inventory # I6U

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 54.99
Convert Currency

Add to Basket

Shipping: US$ 4.99
Within U.S.A.
Destination, Rates & Speeds

4.

Randy Shih
Published by SDC Publications, United States (2015)
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Paperback Quantity Available: 1
Seller:
The Book Depository US
(London, United Kingdom)
Rating
[?]

Book Description SDC Publications, United States, 2015. Paperback. Book Condition: New. Language: English . Brand New Book. This book will teach you everything you need to know to start using Autodesk Inventor 2016 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. An unassembled version of the same robot used throughout the book can be bundled with the book. No previous experience with Computer Aided Design(CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the Inventor interface and its basic tools. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of Inventor s powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using Autodesk Inventor. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. There are many books that show you how to perform individual tasks with Autodesk Inventor, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot. Bookseller Inventory # AAS9781585039661

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 60.36
Convert Currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, Rates & Speeds

5.

Randy Shih
Published by SDC Publications, United States (2015)
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Paperback Quantity Available: 1
Seller:
The Book Depository
(London, United Kingdom)
Rating
[?]

Book Description SDC Publications, United States, 2015. Paperback. Book Condition: New. Language: English . Brand New Book. This book will teach you everything you need to know to start using Autodesk Inventor 2016 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. An unassembled version of the same robot used throughout the book can be bundled with the book. No previous experience with Computer Aided Design(CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the Inventor interface and its basic tools. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of Inventor s powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using Autodesk Inventor. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. There are many books that show you how to perform individual tasks with Autodesk Inventor, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot. Bookseller Inventory # AAS9781585039661

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 61.78
Convert Currency

Add to Basket

Shipping: FREE
From United Kingdom to U.S.A.
Destination, Rates & Speeds

6.

Randy Shih
Published by Taylor and Francis 2015-06-24, Boca Raton (2015)
ISBN 10: 1585039667 ISBN 13: 9781585039661
New paperback Quantity Available: 5
Seller:
Blackwell's
(Oxford, OX, United Kingdom)
Rating
[?]

Book Description Taylor and Francis 2015-06-24, Boca Raton, 2015. paperback. Book Condition: New. Bookseller Inventory # 9781585039661

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 60.63
Convert Currency

Add to Basket

Shipping: US$ 8.00
From United Kingdom to U.S.A.
Destination, Rates & Speeds

7.

Shih, Randy
Published by CRC Press (2015)
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Quantity Available: 7
Seller:
Books2Anywhere
(Fairford, GLOS, United Kingdom)
Rating
[?]

Book Description CRC Press, 2015. PAP. Book Condition: New. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Bookseller Inventory # FT-9781585039661

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 61.48
Convert Currency

Add to Basket

Shipping: US$ 12.00
From United Kingdom to U.S.A.
Destination, Rates & Speeds

8.

Randy Shih
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Quantity Available: 1
Seller:
Speedy Hen LLC
(Sunrise, FL, U.S.A.)
Rating
[?]

Book Description Book Condition: New. Bookseller Inventory # ST1585039667. Bookseller Inventory # ST1585039667

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 77.64
Convert Currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, Rates & Speeds

9.

Randy Shih
Published by SDC Publications (2015)
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Softcover First Edition Quantity Available: 1
Seller:
Rating
[?]

Book Description SDC Publications, 2015. Book Condition: New. Bookseller Inventory # TH9781585039661

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 74.20
Convert Currency

Add to Basket

Shipping: US$ 3.51
From Germany to U.S.A.
Destination, Rates & Speeds

10.

Randy Shih
Published by SDC Publications (2015)
ISBN 10: 1585039667 ISBN 13: 9781585039661
New Perfect Paperback Quantity Available: 1
Seller:
Irish Booksellers
(Rumford, ME, U.S.A.)
Rating
[?]

Book Description SDC Publications, 2015. Perfect Paperback. Book Condition: New. book. Bookseller Inventory # M1585039667

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 81.42
Convert Currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, Rates & Speeds

There are more copies of this book

View all search results for this book