Advanced Environmental Analysis: Applications of Nanomaterials, Volume 2 (Detection Science, Volume 10) - Hardcover

Hardcover

ISBN 10: 1782629068 ISBN 13: 9781782629061

Publisher: Royal Society of Chemistry, 2016

Synopsis

Environmental analysis techniques have advanced due to the use of nanotechnologies in improving the detection sensitivity and miniaturization of the devices in analytical procedures. These allow for developments such as increases in analyte concentration, the removal of interfering species and improvements in the detection limits. Bridging a gap in the literature, this book uniquely brings together state-of-the-art research in the applications of novel nanomaterials to each of the classical components of environmental analysis, namely sample preparation and extraction, separation and identification by spectroscopic techniques. Special attention is paid to those approaches that are considered greener and reduce the cost of the analysis process both in terms of chemicals and time consumption.

Advanced undergraduates, graduates and researchers at the forefront of environmental science and engineering will find this book a good source of information. It will also help regulators, decision makers, surveillance agencies and the organizations assessing the impact of pollutants on the environment.

About this title

Excerpt. © Reprinted by permission. All rights reserved.

Advanced Environmental Analysis Volume 2

Applications of Nanomaterials

By Chaudhery Mustansar Hussain, Boris Kharisov

The Royal Society of Chemistry

Copyright © 2017 The Royal Society of Chemistry
All rights reserved.

ISBN: 978-1-78262-906-1

Contents

Section I: Introduction-Perspective of Analytical Sciences, Properties, Mechanism of Adsorption on Nanomaterials, 
Chapter 1 Perspective on Analytical Sciences and Nanotechnology Deepali Sharma, Suvardhan Kanchi, Krishna Bisetty and Venkatasubba Naidu Nuthalapati, 3, 
Chapter 2 Novel Synthetic Techniques for Nanomaterials Jesús Prado-Gonjal, Romain Heuguet, Sylvain Marinel, Emilio Morán and Rainer Schmidt, 35, 
Chapter 3 Fractal Properties of Nanoparticle Aggregation Jianchao Cai, Yiwen Ju, Xiangyun Hu and Boming Yu, 58, 
Chapter 4 Removal of Pollutants from the Environment Using Sorbents and Nanocatalysts H. R. Aghabozorg and S. Sadegh Hassani, 74, 
Chapter 5 Mechanism of Adsorption on Nanomaterials Rani Bushra, Anees Ahmed and Mohammad Shahadat, 90, 
Chapter 6 Adsorption and Desorption on Nanostructured Materials Rohama Gill, Quratulain Nadeem and Mohamed Bououdina, 112, 
Chapter 7 Nanomaterials for Heavy Metal Removal S. Azzaza, R. Thinesh Kumar, J. Judith Vijaya and M. Bououdina, 139, 
Chapter 8 Adsorption Selectivity of Boron Nitride Nanostructures Designed for Environmental Protection Levan Chkhartishvili, Lina Sartinska and Tsiuri Ramishvili, 167, 
Chapter 9 Environmental Applications of Iron-Containing Nanomaterials: Synthetic Routes, Structures, Compositions and Properties Víctor Manuel Jiménez-Pérez, Oxana V. Kharissova and Blanca M. Muñoz Flores, 193, 
Section II: Sample Preparation and Extraction Techniques with Nanomaterials, 
Chapter 10 Sample Preparation and Extraction Techniques Using Nanomaterials Mostafa Khajeh, Kamran Dastafkan, Mousa Bohlooli and Mansour Ghaffari-Moghaddam, 223, 
Chapter 11 Nanomaterials in Extraction Techniques Krystyna Pyrzynska, 284, 
Chapter 12 Pretreatment Processes for the Analysis of Organic Pollutants with Nanomaterials Amirhassan Amiri, 306, 
Section III: Separation Techniques with Nanomaterials (Chromatography and Membranes Applications of Nanomaterials), 
Chapter 13 Separation Techniques with Nanomaterials: Chromatography and Membrane Applications of Nanomaterials Elizabeth Guihen, 357, 
Chapter 14 Advanced Environmental Engineering Separation Processes, Environmental Analysis and Application of Nanotechnology: A Far-Reaching Review Sukanchan Palit, 377, 
Chapter 15 Application of Nanomaterials in Membrane Technology Soumitra Kar and R. C. Bindal, 417, 
Chapter 16 Nanocellulose: A Novel Support for Water Purification Runcy Wilson, Jithin Joy, Gejo George and V. Anuraj, 456, 
Section IV: Spectroscopic Techniques with Nanomaterials, 
Chapter 17 Detection of Environmental Pollutants by Surface-Enhanced Raman Spectroscopy Monica Potara, Cosmin Farcau, Ioan Botiz and Simion Astilean, 479, 
Chapter 18 Surface-Enhanced Raman Scattering with Nanomaterials M. Umadevi and A. Milton Franklin Benial, 504, 
Subject Index, 520, 
Volume 2, 
Section V: New Trends in Environmental Analysis (Magnetic NMs, Nano-Sensors, Nano-Bio Sensors etc.,), 
Chapter 19 Magnetic Nanomaterials for Environmental Analysis Chaudhery Mustansar Hussain, 3, 
Chapter 20 New Nanoscaled Paramagnetic Complexes (NPCs) Based on Porphyrins/Phthalocyanines for Environmental Chemistry V. V. Korolev, T. N. Lomova, D. V. Korolev, A. G. Ramazanova, E. G. Mozhzhukhina and E. N. Ovchenkova, 14, 
Chapter 21 Nanostructured Metal Oxides for Sensing Toxic Air Pollutants D. G. Rickerby and A. N. Skouloudis, 48, 
Chapter 22 Endotoxin Monitoring Using Nanomaterials Zeynep Altintas, 91, 
Chapter 23 Nanozyme-Based Environmental Monitoring Pabudi Weerathunge, Tarun Kumar Sharma, Rajesh Ramanathan and Vipul Bansal, 108, 
Chapter 24 Graphene-Based Gas Sensors Gennady Gerasimov, 133, 
Chapter 25 Photocatalytic Degradation of Natural and Synthetic Estrogens with Semiconducting Nanoparticles Irwing M. Ramírez-Sánchez, Miguel Ángel Méndez-Rojas and Erick R. Bandala, 153, 
Chapter 26 Smart Composite Materials for Environmental Decontamination Alex T. Kuvarega, Ajay Kumar Mishra and Bhekie B. Mamba, 178, 
Chapter 27 Nanostructured Oxide Materials for Photodegradation of Dyes F. Bensouici, R. Tala-Ighil and M. Bououdina, 207, 
Section VI: Nanomaterials for Water Treatment and Purification, 
Chapter 28 Desalination of Irrigation Water, Livestock Water, and Reject Brine Using n-ZVM (Fe0, Al0, Cu0) David D. J. Antia, 237, 
Section VII: Various Important Aspects About Nanomaterials (Toxicity, Economic and Legal), 
Chapter 29 Nanomaterial Toxicity Ivan Pacheco and Cristina Buzea, 275, 
Chapter 30 Legal Aspects of Environmental Safety Regulation in the Sphere of Nanotechnology in the Russian Federation E. A. Belokrylova, 325, 
Chapter 31 Nanotechnology and International Environmental Law: A Preliminary Assessment Md. Ershadul Karim and Abu Bakar Munir, 348, 
Section VIII: Monitoring and Analysis of Nanomaterials, 
Chapter 32 Fire and Explosion Risk Analysis for Nanomaterials, 383, 
Section IX: Future of Environmental Analysis, 
Chapter 33 Consequences of the Use of Nanomaterials for Environmental Analysis: Fate, Transport and Bioavailability in the Environment, 399, 
Chapter 34 Conclusions, 413, 
Subject Index, 416, 

CHAPTER 1

Magnetic Nanomaterials for Environmental Analysis

CHAUDHERY MUSTANSAR HUSSAIN

19.1 Introduction

Magnetic nanomaterials (MNMs) have widespread applications in biotechnology, biomedical, material science, engineering, and environmental areas. Therefore, considerable attention has been given to their synthesis methods. MNMs as sorbents have been extensively exploited as materials of choice to separate biological cells and isolate proteins, enzymes or peptides. Separation techniques with magnetic nanomaterials are usually gentle and nondestructive to analytes, and even large complexes that tend to be broken up in the process of traditional column chromatography may remain active. Furthermore, magnetic separation can be easily and directly used for raw samples with several simple steps. Recently, different kinds of magnetic nanomaterials have been rapidly and extensively developed, and widely used in analytical techniques. MNMs are superparamagnetic so can attract a magnetic field, but retain no residual magnetism after the field is removed. Therefore, it is easy to isolate MNMs stuck to analytes from a sample solution or complicated matrices by simply applying an external magnetic field and this requires no filtration or centrifugation. In this chapter, factors influencing contaminant removal by magnetic nanoparticles are reviewed and to reduce the treatment cost, the feasibility of the reuse and recovery of magnetic nanoparticles is also discussed.

Compared with conventional separation techniques, there is no need for packing of the column with the sorbent, since the phase separation can be quickly and easily accomplished by applying an external magnetic field. There are a few problems associated with particles at the nano range, i.e., their intrinsic instability, which tends to lead to formation of agglomerates. Moreover, uncovered metallic nanomaterials are chemically highly active and are easily oxidized in air, which results in loss of magnetism and dispersibility. The critical part is to develop shield approaches to chemically stabilize the isolated magnetic nanomaterials. Grafting or coating with an inorganic layer, like silica or carbon, or coating with organics, like surfactants and polymers, are a few shield approaches that have been utilized. In most of these approaches, the shielding shells not only stabilize the NMs but can also offer opportunity for additional functionalization. In summary, magnetic nanomaterials in environmental analysis are able to facilitate or accelerate many extraction and purification procedures and efficiently combine with the majority of other procedures used in environmental analysis.

19.2 Properties and Format of Magnetic Nanomaterials

The properties of magnetic materials were identified early in the sixth century BC, but the first patent was filed by William Fullarton relating to the separation of iron minerals with a magnet in 1792. Application for the separation and analysis of various biologically active compounds and cells using magnetic materials was started in the 1970s. Since then, an increasing number of studies have focused on magnetic separation and analysis of biological samples using magnetic materials. Figure 19.1 shows the data of published articles on magnetic separation of proteins/peptides, nucleic acids, cells, and bioactive compounds and immobilization of enzymes from 2003 to 2013.

There are two main ways of performing magnetic separation of analytes. In the first circumstance, no special modification of the target is needed when dealing with those exhibiting sufficient intrinsic magnetic moments involving some paramagnetic or ferromagnetic biomolecules or cells, such as ferritin, hemoglobin and deoxygenated erythrocytes (in plasma). In the second case, when coping with diamagnetic molecules and supramolecular structures, suitable magnetic modifications should be performed in order to attach magnetic labels to targets or immobilize targets to magnetic carriers or adsorbents. The linkage of magnetic labels to the targets is often mediated by affinity ligands or other types of interactions.

In general, there are two modes for magnetic separation, i.e., direct or indirect (Figure 19.2). In the direct mode, magnetic affinity particles that possess appropriate affinity ligands and exhibit affinity toward the target compound(s) are applied directly to the sample. After incubation, the target compounds or cells are bonded to the magnetic affinity particles and stable magnetic complexes are formed. In the indirect mode, free affinity ligands, such as appropriate antibodies, are firstly added to the solution or suspension to enable the interaction with target compounds. After the excess unbound affinity ligand is removed from the solution, the resulting labeled complex is captured by appropriate affinity magnetic particles. In both methods, the resulting complex of magnetic particles with the target structure is washed and recovered using an appropriate magnetic separator. The two methods perform equally well. Usually, the direct mode is faster, more easily controlled and requires fewer antibodies, while the indirect mode is more efficient, especially for affinity ligands with poor affinity for the target compounds or cells. However, the indirect mode usually needs excess antibodies or excess magnetic particles so the removal of free antibodies may be more difficult.

19.3 Synthesis and Processing of Magnetic NMs

The most common techniques for MNMs synthesis include co-precipitation, thermal decomposition, microemulsion, vapor methods, sol-gel reaction, polyol method, flow injection synthesis, flame spray pyrolysis, laser pyrolysis, pulsed laser ablation, electrochemical methods and other wet chemistries. The most extensively used and most convenient method for the synthesis of ferrite NMs of controlled sizes and magnetic properties is co-precipitation. It is the simplistic way to synthesize MNMs. Metal oxides and ferrites are most commonly synthesized by this method. A wide range of surface chemistries have also been developed to enhance the biocompatibility of magnetic nanoparticles (MNPs). Additionally, several procedures have been developed for the formation of magnetic composites. Nanoferrites are the most commonly used MNMs, which become superparamagnetic when they are smaller than 128 nm. The stability of nanoferrites in solution is increased by chemically modifying their surface with surfactants, silicones or phosphoric acid derivatives. Metallic NPs have also been developed but they are difficult to handle and have unwanted side reactions. On the other hand, MNPs with a magnetic core (Fe or Co) but with a nonreactive shell, such as graphene, have been recently developed and have been demonstrated to have higher chemical stability (in acidic and basic solution, and organic solvents), and higher magnetization.

A typical example of a top-down method of synthesis of magnetic nano-materials is mechanical attrition, where the material is prepared not by cluster assembly but by the structural decomposition of coarser-grained structures as the result of severe plastic deformation. This has become a popular method to make nanocrystalline materials because of its simplicity, the relatively inexpensive equipment needed, and the applicability to essentially the synthesis of all classes of materials. Often the major advantage is the possibility for easily scaling up to capacity quantities of material for various applications. Typically, mechanical grinding is attained by using a high energy shaker, a planetary ball, or a tumbler mill. The energy transferred to the powder from refractory or steel balls depends on the rotational speed, size and number of the balls, ratio of the ball to powder mass, the time of milling and the milling atmosphere. Nanomagnets are formed by the shear action during grinding.

Wet chemical synthesis of nanomagnets is classified into two broad collections: firstly, top-down methods, where single crystals are imprinted in an aqueous solution for producing nanomaterials, e.g., porous silicon synthesis by electrochemical etching. Secondly, bottom-up method, including precipitation and sol-gel method, where materials containing the desired precursors are mixed in a controlled fashion to form a colloidal solution. In general, a sol-gel process comprises the evolution of inorganic networks through the formation of a colloidal suspension and gelation of the sol to form a network in a continuous liquid phase. The precursors for synthesizing these colloids usually consist of a metal or metalloid element surrounded by various reactive ligands. The starting material is processed to form a dispersible oxide and forms a sol in contact with water or dilute acid. Removal of the liquid from the sol yields the gel, and the sol-gel transition controls the particle size and shape. Calcination of the gel produces the oxide. The sol-gel method of synthesizing nanomaterials is very popular amongst chemists and is widely employed to prepare oxide materials. The sol-gel process can be characterized by a series of distinct steps. Another extensively used method for the preparation of magnetic nano particles and films is laser ablation. A laser beam is used in this process as the primary excitation source of ablation for generating clusters directly from a solid sample in a wide variety of applications. The small dimensions of the particles and the possibility to form thick films make this method quite an efficient tool for the production of ceramic particles and coatings and also an ablation source for analytical applications, such as coupling to inductively coupled plasma emission spectrometry (ICP). The co-precipitation method is easy to do with a success rate from 96 to 99.9%. Chemical coprecipitation can produce fine, stoichiometric particles of single and multicomponent metal oxides. Templating is commonly employed for the controlled production of materials with ordered structure with desired properties. In the past, templates like aluminium oxide, carbon nanotubes, surfactants, polymer fibres, chitosan, cellulose, alginate and egg shell membranes have been employed.

19.4 Environmental Applications of Magnetic Nanomaterials

Magnetic nanomaterials have been broadly used in environmental applications and have shown favorable performance for pollution removal and toxicity reduction. Among the most widely used magnetic nanoparticles, nano zero-valent iron, magnetite and maghemite nanoparticles have generated immense interest in research for environmental applications for treatment of contaminated water and subsurface environments. Heavy metals, such as arsenic and chromium, and organic pollutants, like chlorinated solvents, can be immobilized or reduced to less toxic species by nano zero-valent iron. The effectiveness of nano zero-valent iron is not just limited to laboratory findings. Many companies have been established for the manufacturing of nano zero-valent iron and its application for environmental protection. In addition to the great removal performance, some researchers demonstrated the feasibility of reusing magnetic nanoparticles by desorbing the contaminants and regaining the removal capacity in successive treatment cycles. However, there are numerous conditions influencing the applicability of magnetic nanoparticles in a sustainable treatment process.

Magnetic nanoparticles not only have a large removal capacity, fast kinetics and high reactivity for contaminant removal owing to their extremely small particle size and high surface-area-to-volume ratio, but they also have one more important property, magnetism. This is a useful property for water and wastewater treatment systems. A compact and efficient water or wastewater treatment system can take advantage of the high reactivity of the magnetic nanoparticles for pollutant removal. It is expected that magnetic separation could be a more cost-effective and convenient method for separating such tiny particles than sophisticated membrane filtration. Separation of magnetic nanoparticles from solution with a low-gradient magnetic field or a hand-held magnet has been frequently reported, showing the feasibility of separation and recovery of magnetic nanoparticles from water or wastewater, but no successful real applications of magnetic particles for water or wastewater treatment have yet been reported. On top of the high surface free energy, the magnetism of nanoparticles has been suspected to enhance the aggregation of nanoparticles and reduce the removal capacity, so acting as a great hindrance to the recovery and reuse of magnetic nanoparticles.

A similarly important property of nanoscale iron particles is their huge flexibility for in situ applications. Modified iron nanoparticles, such as catalyzed and supported nanoparticles, have been synthesized to further enhance their speed and efficiency of remediation (Figure 19.3). In spite of some still unresolved uncertainties associated with the application of iron nanoparticles, this material is being accepted as a versatile tool for the remediation of different types of contaminants in groundwater, soil, and air on both the experimental and field scales. In recent years, other MNMs have been investigated for the removal of organic and inorganic pollutants.

MNMs have a high capacity for the removal of high concentrations of organic compounds. Dyes are present in the wastewater streams of many industrial sectors, such as in dyeing, textile factories, tanneries, and the paint industry. Therefore, the use of MNMs as an expensive or low efficient adsorbent for treatment of textile effluents can be a good platform, which needs more detailed investigations. A very important aspect in metal toxin removal is the preparation of functionalized sorbents for affinity or selective removal of hazardous metal ions from complicated matrices. MNMs are used as sorbents for the removal of metals like Cu(II) (Table 19.1).

Owing to their small size, magnetic NMs offer a larger surface area-to-volume ratio than currently used microbeads, which results in good reaction homogeneity and faster reaction kinetics. Thus, the preparation of magnetic fluorescent particles, such as polystyrene magnetic beads with entrapped organic dyes/quantum dots, iron oxide particles coated with dye-doped silica shells, and silica NMs embedded with iron oxide and quantum dots, is easier. The magnetic properties of the MLNMs allow their manipulation by an external magnetic field without the need for centrifugation or filtration. Their optical characteristics (sharp emission, photostability, long lifetime) facilitate the implementation of internal calibration in the detection system. This introduces a unique internal quality control and easy quantification to multiplexed immunoanalysis. This method developed and enables a direct, simple, and quantitative multiplex protein analysis using conventional organic dyes and can be applied for disease diagnostics and detection of biological threats. In magnetic solid-phase extraction (MSPE) (Figure 19.4), functionalized MNMs are added to sample matrices containing target analytes and untargeted compounds. After incubation or application of auxiliary irradiation agitation (e.g., sonication) for an appropriate time until the target analytes are adsorbed by the adsorbent, the functionalized MNMs are easily isolated from the solution by applying an external magnetic field. When the external magnetic field is removed, the functionalized MNMs can re-disperse in solution, which is convenient for subsequent washing and desorption. Compared with commonly used sorbent materials, suspended magnetic nanomaterials can be separated from large-volume samples by use of a magnet instead of high-speed centrifugation or filtration; this simplifies and accelerates the isolation process.

19.5 Conclusions and Perspectives

In summary, MNMs are highly stable and offer high extraction efficiency because of the high surface area-to-volume ratio of the extraction phase and faster separation, and they can conveniently synthesized and modified. Moreover, they also exhibit high selectivity for the target analytes from environmentally complicated matrices, reusability and excellent dispersibility in aqueous solutions. The application of MNMs in environmental analysis considerably reduces the duration of the analysis by decreasing the number of extraction steps. In addition, simultaneous isolation and enrichment of analytes and the use of an external magnetic field for separation of the sorbent with analytes adsorbed on the surface impact significantly on environmental analysis. Likewise, MNMs present opportunities for green analysis in chemistry as these can reduce usage of solvents, thus restricting the creation of hazardous waste.

(Continues...)

Excerpted from Advanced Environmental Analysis Volume 2 by Chaudhery Mustansar Hussain, Boris Kharisov. Copyright © 2017 The Royal Society of Chemistry. Excerpted by permission of The Royal Society of Chemistry.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.

Edition details

• Publisher: Royal Society of Chemistry
• Publication date: 2016
• Language: English
• ISBN 10: 1782629068
• ISBN 13: 9781782629061
• Binding: Hardcover
• Edition number: 1
• Number of pages: 430
• Editor: Hussain Chaudhery Mustansar, Kharisov Boris