Items related to Three-Phase Conversion: Running Three-phase Equipment...
Three-Phase Conversion: Running Three-phase Equipment on Single Phase Supplies (Workshop Practice) - Softcover
Synopsis
Often, model engineers buy industrial workshop equipment, such as lathes, drilling machines and milling machines, but they usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. This book provides an invaluable source of practical guidance on how anyone can find out the type of electrical equipment they have, and how to convert it to allow it to run on a single-phase supply. Whilst many boooks on the subject give just some ideas on methods of conversion, this one provides exact calculations for each method to ensure that the best performance is achieved, without compromising safety or risking burning out motors or other equipment. Step-by-step instructions with photographs and diagrams make simple what would be thought of as difficult or complex. Worked examples of the few required calculations are given and cover electricity supplies in America, Europe and the rest of the world. Explanations of what test equipment is needed are given, along with instructions on how to build some useful test equipment at low cost. Finally, it does at least advise on which equipment cannot be converted at all.
"synopsis" may belong to another edition of this title.
About the Author
Graham Astbury graduated from the University of Birmingham and is a Chartered Engineer, who has recently retired after a career in the chemical industry providing expertise on the prevention of fires and explosions. With a lifelong interest in both model and electrical engineering, he started re-winding motors and transformers whilst still at school, and has spent the last few years researching into phase conversion methods for his own workshop.
"About this title" may belong to another edition of this title.
Search results for Three-Phase Conversion: Running Three-phase Equipment...
Stock Image
Three-Phase Conversion: Running Three-phase Equipment on Single Phase Supplies (Workshop Practice)
Published by
Specialist Interest Model Books ltd, 2010
ISBN 10: 1854862626
ISBN 13: 9781854862624
Used
Soft cover
Seller: 3rd St. Books, Lees Summit, MO, U.S.A.
Seller rating 5 out of 5 stars
Soft cover. Condition: Very Good. Very good, clean, tight condition. Text free of marks. Professional book dealer since 1999. All orders are processed promptly and carefully packaged. Seller Inventory # 071606
Quantity: 1 available
Seller Image
Three-Phase Conversion (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 2011
ISBN 10: 1854862626
ISBN 13: 9781854862624
New
Paperback
Seller: Grand Eagle Retail, Fairfield, OH, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment, such as lathes, drilling machines and milling machines, which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. This book provides an invaluable source of practical guidance on how anyone can find out the type of electrical equipment they have, and how to convert it to run on a single-phase supply. The book provides calculations, step-by-step instructions with photographs and diagrams and covers electricity supplies in the UK, North America, Europe and the rest of the world. Finally, it also advises on which equipment cannot be converted at all. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Seller Inventory # 9781854862624
Quantity: 1 available
Stock Image
Three-Phase Conversion: Running Three-phase Equipment on Single Phase Supplies (Workshop Practice)
Published by
Specialist Interest Model Books ltd, 2010
ISBN 10: 1854862626
ISBN 13: 9781854862624
Used
Paperback
Seller: ThriftBooks-Atlanta, AUSTELL, GA, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 0.45. Seller Inventory # G1854862626I3N00
Quantity: 1 available
Stock Image
Three-Phase Conversion: Running Three-phase Equipment on Single Phase Supplies (Workshop Practice)
Published by
Specialist Interest Model Books ltd, 2010
ISBN 10: 1854862626
ISBN 13: 9781854862624
Used
Paperback
Seller: ThriftBooks-Dallas, Dallas, TX, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. No Jacket. Former library book; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 0.45. Seller Inventory # G1854862626I4N10
Quantity: 1 available
Stock Image
Three-Phase Conversion: Running Three-phase Equipment on Single Phase Supplies (Workshop Practice)
Published by
Specialist Interest Model Books ltd, 2010
ISBN 10: 1854862626
ISBN 13: 9781854862624
Used
Paperback
Seller: ThriftBooks-Atlanta, AUSTELL, GA, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 0.45. Seller Inventory # G1854862626I4N00
Quantity: 1 available
Stock Image
Three-Phase Conversion: Running Three-phase Equipment on Single Phase Supplies (Workshop Practice)
Published by
Specialist Interest Model Books ltd, 2010
ISBN 10: 1854862626
ISBN 13: 9781854862624
Used
Paperback
Seller: ThriftBooks-Atlanta, AUSTELL, GA, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. No Jacket. Former library book; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 0.45. Seller Inventory # G1854862626I4N10
Quantity: 1 available
Stock Image
Three-phase Conversion (Workshop Practice)
Seller: AwesomeBooks, Wallingford, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. Three-phase Conversion (Workshop Practice) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. Seller Inventory # 7719-9781854862624
Quantity: 1 available
Seller Image
Three-Phase Conversion (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 2011
ISBN 10: 1854862626
ISBN 13: 9781854862624
New
Paperback
Seller: AussieBookSeller, Truganina, VIC, Australia
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment, such as lathes, drilling machines and milling machines, which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. This book provides an invaluable source of practical guidance on how anyone can find out the type of electrical equipment they have, and how to convert it to run on a single-phase supply. The book provides calculations, step-by-step instructions with photographs and diagrams and covers electricity supplies in the UK, North America, Europe and the rest of the world. Finally, it also advises on which equipment cannot be converted at all. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability. Seller Inventory # 9781854862624
Quantity: 1 available
Stock Image
Three-phase Conversion (Workshop Practice)
Seller: Bahamut Media, Reading, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. Seller Inventory # 6545-9781854862624
Quantity: 1 available
Seller Image
Three-Phase Conversion (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 2011
ISBN 10: 1854862626
ISBN 13: 9781854862624
New
Paperback
Seller: CitiRetail, Stevenage, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment, such as lathes, drilling machines and milling machines, which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. This book provides an invaluable source of practical guidance on how anyone can find out the type of electrical equipment they have, and how to convert it to run on a single-phase supply. The book provides calculations, step-by-step instructions with photographs and diagrams and covers electricity supplies in the UK, North America, Europe and the rest of the world. Finally, it also advises on which equipment cannot be converted at all. A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability. Seller Inventory # 9781854862624
Quantity: 1 available