Items related to Milling Machine & Accessories: And Accessories...
Milling Machine & Accessories: And Accessories Choosing and Using (Workshop Practice Series) - Softcover
Synopsis
This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.
"synopsis" may belong to another edition of this title.
About the Author
Harold Hall was for a number of years the editor of Model Engineers' Workshop magazine and through its pages, he established himself as a mentor to tyro model engineers worldwide. He is the author of seven books in the indispensable Workshop Practice Series and lives in the Hertfordshire countryside. Harold Hall commenced an industrial apprenticeship in 1950 at the age of sixteen and worked as an electrical control systems engineer for thirty-five years before becoming editor of Model Engineer's Workshop magazine in 1991. Following retirement in 1995, he has continued to contribute metalworking articles to almost every issue of the magazine published since then. His crafting hobbies extend beyond model engineering to cabinet making, modelling, marquetry and pencil sketching.
"About this title" may belong to another edition of this title.
- PublisherSpecialist Interest Model Books ltd
- Publication date2011
- ISBN 10 1854862669
- ISBN 13 9781854862662
- BindingPaperback
- LanguageEnglish
- Number of pages123
- Rating
Search results for Milling Machine & Accessories: And Accessories...
Stock Image
Milling Machine & Accessories: And Accessories Choosing and Using (Workshop Practice Series) [Paperback] Hall, Harold
Published by
Specialist Interest Model Books ltd, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
New
Softcover
Seller: RareCollectibleSignedBooks, West hills, CA, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Light stocking crease or shelf wear. In stock. Seller Inventory # bbkxaeyan-1705
Quantity: 1 available
Seller Image
The Milling Machine (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
New
Paperback
Seller: Grand Eagle Retail, Fairfield, OH, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Seller Inventory # 9781854862662
Quantity: 1 available
Stock Image
The Milling Machine (Workshop Practice): And Accessories, Choosing and Using: 49
Published by
Specialist Interest Model Books ltd, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
Used
Paperback
Seller: WorldofBooks, Goring-By-Sea, WS, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged. Seller Inventory # GOR006709501
Quantity: 2 available
Seller Image
The Milling Machine (Workshop Practice): And Accessories, Choosing and Using: 49
Published by
Special Interest Model Books, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
Used
Softcover
Seller: WeBuyBooks, Rossendale, LANCS, United Kingdom
Seller rating 5 out of 5 stars
Condition: Like New. Most items will be dispatched the same or the next working day. An apparently unread copy in perfect condition. Dust cover is intact with no nicks or tears. Spine has no signs of creasing. Pages are clean and not marred by notes or folds of any kind. Seller Inventory # wbs5833390534
Quantity: 1 available
Stock Image
Milling Machine Accessories: And Accessories Choosing and Using (Workshop Practice Series)
Published by
Specialist Interest Model Books ltd, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
Used
Paperback
Seller: Grumpys Fine Books, Tijeras, NM, U.S.A.
Seller rating 4 out of 5 stars
Paperback. Condition: very good. little wear and tear. Seller Inventory # Grumpy1854862669
Quantity: 1 available
Stock Image
Milling Machine Accessories: And Accessories Choosing and Using (Workshop Practice Series)
Published by
Specialist Interest Model Books ltd, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
New
Paperback
Seller: Grumpys Fine Books, Tijeras, NM, U.S.A.
Seller rating 4 out of 5 stars
Paperback. Condition: new. Prompt service guaranteed. Seller Inventory # Clean1854862669
Quantity: 1 available
Seller Image
The Milling Machine (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
New
Paperback
Seller: AussieBookSeller, Truganina, VIC, Australia
Seller rating 3 out of 5 stars
Paperback. Condition: new. Paperback. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability. Seller Inventory # 9781854862662
Quantity: 1 available
Seller Image
The Milling Machine (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 2011
ISBN 10: 1854862669
ISBN 13: 9781854862662
New
Paperback
Seller: CitiRetail, Stevenage, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed. The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop. The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained.The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described. This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability. Seller Inventory # 9781854862662
Quantity: 1 available