Steel Structures: Design Using FEM - Softcover

Kindmann, Rolf; Kraus, Matthias

9783433029787: Steel Structures: Design Using FEM

Softcover

ISBN 10: 3433029784 ISBN 13: 9783433029787

Publisher: Ernst & Sohn, 2011

View all copies of this ISBN edition

2 Used

From US$ 90.85

0 New

Die Finite-Elemente-Methode (FEM) bildet heute in der Praxis der Bauingenieure ein Standardverfahren zur Berechnung von Tragwerken. Nach einer Einf�hrung in die Methodik konzentriert sich das Buch auf die Ermittlung von Schnittgr��en, Verformungen, Verzweigungslasten und Eigenformen f�r Stahlkonstruktionen. Neben linearen Berechnungen f�r Tragwerke bilden die Stabilit�tsf�lle Biegeknicken, Biegedrillknicken und Plattenbeulen mit der Ermittlung von Verzweigungslasten und Berechnungen nach Theorie II. Ordnung wichtige Schwerpunkte. Hinzu kommt die Untersuchung von Querschnitten, f�r die Berechnungen mit der FEM zuk�nftig stark an Bedeutung gewinnen werden. F�r praktisch t�tige Ingenieure und Studierende gleicherma�en werden alle notwendigen Berechnungen f�r die Bemessung von Tragwerken anschaulich dargestellt.

"synopsis" may belong to another edition of this title.

About the Authors

University Professor Dr.-Ing. Rolf Kindmann studied civil engineering at the University of Bochum. Between 1974 and 1989 he worked at the university for six years as a researcher and then for ten years at Thyssen Engineering in different positions, lastly as division manager of all engineering departments. From 1990 to 2013 he was a full professor and the head if the Institute of Steel and Composite Structures at the University of Bochum. In 1991 he founded Sch�rmann - Kindmann and partners, Consulting Engineers (SKP) in Dortmund. Professor Dr. Kindmann is a licensed checking engineer for steel and concrete structures and of design in railway engieneering.
Dr.-Ing. Matthias Kraus studied civil engineering at the Technical University of Darmstadt. In 2001 he changed to the University of Bochum as researcher, where he received his doctoral degree in 2005 and then worked as chief engineer at the Institute of Steel and Composite Structures. Since 2010 Dr. Kraus has worked at Sch�rmann - Kindmann and Partners, Dortmund, as chief engineer. He also has adjunct lecturships at the University of Bochum.

University-Professor Dr.-Ing. Rolf Kindmann studied civil engineering at the University of Bochum. Between 1974 and 1989 he worked at the university for six years as a researcher and then for ten years at Thyssen Engineering in different positions, lastly as division manager of all engineering departments. From 1990 to 2013 he was a full professor and the head if the Institute of Steel and Composite Structures at the University of Bochum. In 1991 he founded Sch�rmann - Kindmann and partners, Consulting Engineers (SKP) in Dortmund. Professor Dr. Kindmann is a licensed checking engineer for steel and concrete structures and of design in railway engieneering.
Dr.-Ing. Matthias Kraus studied civil engineering at the Technical University of Darmstadt. In 2001 he changed to the University of Bochum as researcher, where he received his doctoral degree in 2005 and then worked as chief engineer at the Institute of Steel and Composite Structures. Since 2010 Dr. Kraus has worked at Sch�rmann - Kindmann and Partners, Dortmund, as chief engineer. He also has adjunct lecturships at the University of Bochum.

From the Back Cover

This book presents the design of steel structures using finite element methods (FEM) according to the current state of the art in Germany and the rest of Europe. After a short introduction on the basics of the design, this book illustrates the FEM with a focus on internal forces, displacements, critical loads and modal shapes. Next to finite element procedures for linear calculations considering the stress states of normal force, biaxial bending and warping torsion, non-linear calculations and the stability cases of flexural buckling, lateral torsional buckling and plate buckling are concentrated on significantly. In this context, design procedures for stability according to the standards DIN 18800 and Eurocode 3 are introduced and discussed. In addition, important fundamental issues are covered, such as the determination of cross-section properties as well as the elastic and plastic cross-section resistance. Complementary, finite element procedures for cross sections are dealt with, which will have an increasing importance in the future.

This book has evolved within the teaching activities of the authors in the lecture “Computer-oriented Design of Steel Structures” on the Masters’ Programme “Computational Engineering” at the University of Bochum. It covers the total variety of demands needed to be discussed for the safe, economic and modern design of steel structures.