Young's Modulus Decrease after Cold Forming in High Strength Steels: An Investigation Into the Mechanism using Bake Hardenable Steel

 
9783838376165: Young's Modulus Decrease after Cold Forming in High Strength Steels: An Investigation Into the Mechanism using Bake Hardenable Steel

The aim of this work is to know more about the underprediction of springback in numerical simulation of sheet metal forming. There are a lot of factors which influence the accuracy of springback with numerical simulation.One factor responsible for the inaccurate springback prediction is the assumption of constant Young?s modulus in FE analysis. Young?s modulus, however, is found to decrease during plastic deformation. Therefore, an accurate model is needed to be implemented in FE analysis which can predict the decrease in Young?s modulus. With passage of time, Young?s modulus is found to restore to its initial value. The present study focuses on this aspect of springback prediction. Bake Hardenable (BH) steel has been selected to investigate the degradation and recovery in Young?s modulus. The decrease in Young?s modulus and its recovery has been measured experimentally by two methods i.e. the dynamic method (Impulse Excitation Technique) and a static method (Tensile Test).

"synopsis" may belong to another edition of this title.

About the Author:

Abdul Haleem, B.E (Mechanical Engineering) from UET, Peshawar, Pakistan. MSc (Production Technology) from Delft University of Tech., Netherlands. Zeeshan Azmat, B.E (Mechanical Engineering) from NED UET, Karachi, Pakistan. MS (Flight Vehicle Design) from BUAA,Beijing China. The authors are currently working in a research organization.

Abdul Haleem, B.E (Mechanical Engineering) from UET, Peshawar, Pakistan. MSc (Production Technology) from Delft University of Tech., Netherlands. Zeeshan Azmat, B.E (Mechanical Engineering) from NED UET, Karachi, Pakistan. MS (Flight Vehicle Design) from BUAA,Beijing China. The authors are currently working in a research organization.

"About this title" may belong to another edition of this title.

Buy New View Book
List Price: US$ 61.00
US$ 49.68

Convert Currency

Shipping: US$ 8.10
From United Kingdom to U.S.A.

Destination, Rates & Speeds

Add to Basket

Top Search Results from the AbeBooks Marketplace

1.

Abdul Haleem
Published by LAP Lambert Academic Publishing 2010-06-20 (2010)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New paperback Quantity Available: > 20
Seller:
Blackwell's
(Oxford, OX, United Kingdom)
Rating
[?]

Book Description LAP Lambert Academic Publishing 2010-06-20, 2010. paperback. Book Condition: New. Bookseller Inventory # 9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 49.68
Convert Currency

Add to Basket

Shipping: US$ 8.10
From United Kingdom to U.S.A.
Destination, Rates & Speeds

2.

Abdul Haleem
Published by LAP Lambert Academic Publishing (2010)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Quantity Available: > 20
Print on Demand
Seller:
Pbshop
(Wood Dale, IL, U.S.A.)
Rating
[?]

Book Description LAP Lambert Academic Publishing, 2010. PAP. Book Condition: New. New Book. Shipped from US within 10 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bookseller Inventory # IQ-9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 57.71
Convert Currency

Add to Basket

Shipping: US$ 3.99
Within U.S.A.
Destination, Rates & Speeds

3.

Haleem, Abdul / Azmat, Zeeshan
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Quantity Available: 1
Seller:
Rating
[?]

Book Description Book Condition: New. Publisher/Verlag: LAP Lambert Academic Publishing | An Investigation Into the Mechanism using Bake Hardenable Steel | The aim of this work is to know more about the underprediction of springback in numerical simulation of sheet metal forming. There are a lot of factors which influence the accuracy of springback with numerical simulation.One factor responsible for the inaccurate springback prediction is the assumption of constant Young s modulus in FE analysis. Young s modulus, however, is found to decrease during plastic deformation. Therefore, an accurate model is needed to be implemented in FE analysis which can predict the decrease in Young s modulus. With passage of time, Young s modulus is found to restore to its initial value. The present study focuses on this aspect of springback prediction. Bake Hardenable (BH) steel has been selected to investigate the degradation and recovery in Young s modulus. The decrease in Young s modulus and its recovery has been measured experimentally by two methods i.e. the dynamic method (Impulse Excitation Technique) and a static method (Tensile Test). | Format: Paperback | Language/Sprache: english | 108 pp. Bookseller Inventory # K9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 59.78
Convert Currency

Add to Basket

Shipping: US$ 3.57
From Germany to U.S.A.
Destination, Rates & Speeds

4.

Haleem, Abdul
Published by LAP Lambert Academic Publishing (2016)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Paperback Quantity Available: 1
Print on Demand
Seller:
Ria Christie Collections
(Uxbridge, United Kingdom)
Rating
[?]

Book Description LAP Lambert Academic Publishing, 2016. Paperback. Book Condition: New. PRINT ON DEMAND Book; New; Publication Year 2016; Not Signed; Fast Shipping from the UK. No. book. Bookseller Inventory # ria9783838376165_lsuk

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 60.23
Convert Currency

Add to Basket

Shipping: US$ 5.23
From United Kingdom to U.S.A.
Destination, Rates & Speeds

5.

Abdul Haleem
Published by LAP Lambert Academic Publishing (2010)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Quantity Available: > 20
Print on Demand
Seller:
Books2Anywhere
(Fairford, GLOS, United Kingdom)
Rating
[?]

Book Description LAP Lambert Academic Publishing, 2010. PAP. Book Condition: New. New Book. Delivered from our UK warehouse in 3 to 5 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bookseller Inventory # LQ-9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 56.42
Convert Currency

Add to Basket

Shipping: US$ 12.17
From United Kingdom to U.S.A.
Destination, Rates & Speeds

6.

Abdul Haleem
Published by LAP Lambert Acad. Publ. Jun 2010 (2010)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Taschenbuch Quantity Available: 1
Seller:
Rheinberg-Buch
(Bergisch Gladbach, Germany)
Rating
[?]

Book Description LAP Lambert Acad. Publ. Jun 2010, 2010. Taschenbuch. Book Condition: Neu. Neuware - The aim of this work is to know more about the underprediction of springback in numerical simulation of sheet metal forming. There are a lot of factors which influence the accuracy of springback with numerical simulation.One factor responsible for the inaccurate springback prediction is the assumption of constant Young s modulus in FE analysis. Young s modulus, however, is found to decrease during plastic deformation. Therefore, an accurate model is needed to be implemented in FE analysis which can predict the decrease in Young s modulus. With passage of time, Young s modulus is found to restore to its initial value. The present study focuses on this aspect of springback prediction. Bake Hardenable (BH) steel has been selected to investigate the degradation and recovery in Young s modulus. The decrease in Young s modulus and its recovery has been measured experimentally by two methods i.e. the dynamic method (Impulse Excitation Technique) and a static method (Tensile Test). 108 pp. Englisch. Bookseller Inventory # 9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 60.19
Convert Currency

Add to Basket

Shipping: US$ 20.43
From Germany to U.S.A.
Destination, Rates & Speeds

7.

Abdul Haleem
Published by LAP Lambert Acad. Publ. Jun 2010 (2010)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Taschenbuch Quantity Available: 1
Seller:
Agrios-Buch
(Bergisch Gladbach, Germany)
Rating
[?]

Book Description LAP Lambert Acad. Publ. Jun 2010, 2010. Taschenbuch. Book Condition: Neu. Neuware - The aim of this work is to know more about the underprediction of springback in numerical simulation of sheet metal forming. There are a lot of factors which influence the accuracy of springback with numerical simulation.One factor responsible for the inaccurate springback prediction is the assumption of constant Young s modulus in FE analysis. Young s modulus, however, is found to decrease during plastic deformation. Therefore, an accurate model is needed to be implemented in FE analysis which can predict the decrease in Young s modulus. With passage of time, Young s modulus is found to restore to its initial value. The present study focuses on this aspect of springback prediction. Bake Hardenable (BH) steel has been selected to investigate the degradation and recovery in Young s modulus. The decrease in Young s modulus and its recovery has been measured experimentally by two methods i.e. the dynamic method (Impulse Excitation Technique) and a static method (Tensile Test). 108 pp. Englisch. Bookseller Inventory # 9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 60.19
Convert Currency

Add to Basket

Shipping: US$ 20.43
From Germany to U.S.A.
Destination, Rates & Speeds

8.

Haleem, Abdul
Published by LAP LAMBERT Academic Publishing
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Quantity Available: 1
Seller:
Ohmsoft LLC
(Lake Forest, IL, U.S.A.)
Rating
[?]

Book Description LAP LAMBERT Academic Publishing. Book Condition: Brand New. FREE domestic ground shipping. Fast priority express available. Tracking service included. Ships from USA (United States of America). Bookseller Inventory # 3838376161

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 84.34
Convert Currency

Add to Basket

Shipping: FREE
Within U.S.A.
Destination, Rates & Speeds

9.

Abdul Haleem
Published by LAP Lambert Academic Publishing, Germany (2010)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Paperback Quantity Available: 1
Seller:
The Book Depository EURO
(London, United Kingdom)
Rating
[?]

Book Description LAP Lambert Academic Publishing, Germany, 2010. Paperback. Book Condition: New. Language: English . Brand New Book. The aim of this work is to know more about the underprediction of springback in numerical simulation of sheet metal forming. There are a lot of factors which influence the accuracy of springback with numerical simulation.One factor responsible for the inaccurate springback prediction is the assumption of constant Young s modulus in FE analysis. Young s modulus, however, is found to decrease during plastic deformation. Therefore, an accurate model is needed to be implemented in FE analysis which can predict the decrease in Young s modulus. With passage of time, Young s modulus is found to restore to its initial value. The present study focuses on this aspect of springback prediction. Bake Hardenable (BH) steel has been selected to investigate the degradation and recovery in Young s modulus. The decrease in Young s modulus and its recovery has been measured experimentally by two methods i.e. the dynamic method (Impulse Excitation Technique) and a static method (Tensile Test). Bookseller Inventory # KNV9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 90.27
Convert Currency

Add to Basket

Shipping: US$ 4.05
From United Kingdom to U.S.A.
Destination, Rates & Speeds

10.

Abdul Haleem
Published by LAP Lambert Acad. Publ. Jun 2010 (2010)
ISBN 10: 3838376161 ISBN 13: 9783838376165
New Taschenbuch Quantity Available: 1
Print on Demand
Seller:
AHA-BUCH GmbH
(Einbeck, Germany)
Rating
[?]

Book Description LAP Lambert Acad. Publ. Jun 2010, 2010. Taschenbuch. Book Condition: Neu. This item is printed on demand - Print on Demand Neuware - The aim of this work is to know more about the underprediction of springback in numerical simulation of sheet metal forming. There are a lot of factors which influence the accuracy of springback with numerical simulation.One factor responsible for the inaccurate springback prediction is the assumption of constant Young s modulus in FE analysis. Young s modulus, however, is found to decrease during plastic deformation. Therefore, an accurate model is needed to be implemented in FE analysis which can predict the decrease in Young s modulus. With passage of time, Young s modulus is found to restore to its initial value. The present study focuses on this aspect of springback prediction. Bake Hardenable (BH) steel has been selected to investigate the degradation and recovery in Young s modulus. The decrease in Young s modulus and its recovery has been measured experimentally by two methods i.e. the dynamic method (Impulse Excitation Technique) and a static method (Tensile Test). 108 pp. Englisch. Bookseller Inventory # 9783838376165

More Information About This Seller | Ask Bookseller a Question

Buy New
US$ 60.19
Convert Currency

Add to Basket

Shipping: US$ 35.18
From Germany to U.S.A.
Destination, Rates & Speeds

There are more copies of this book

View all search results for this book