Items related to Research Problems in Mechanical Engineering: Transitional...
Synopsis
Research Problems in Mechanical Engineering has been solved by Using Seths, B.R. Theory. From chapter seven, It has been seen that higher value angular speed required for disc without edge loading. With the effect of edge loading disc required lower angular speed. It has been seen that for incompressible material required higher angular speed for initial yielding as compare to disc made of compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore. From Chapter Eight,It is found that the anisotropy of the material has little effect on radial stress but the effect is more prominent on the axial and tangential stresses for higher ratio of anisotropic constants along the radius. The results indicate the maximum stress is not always on the surface.
"synopsis" may belong to another edition of this title.
About the Author
Dr Pankaj, Sr. A.P. & Research Coordinator, Department Of Mathematics, Indus International University Una, Himachal Pradesh, India, Honorary Fellow awarded by Australian Institute of High Energetic Material, 2011 Editor in International Journal of Applied Science and Mechanical Engineering Journal.
"About this title" may belong to another edition of this title.
Search results for Research Problems in Mechanical Engineering: Transitional...
Seller Image
Research Problems in Mechanical Engineering
Published by
LAP LAMBERT Academic Publishing Nov 2011, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Research Problems in Mechanical Engineering has been solved by Using Seths, B.R. Theory. From chapter seven, It has been seen that higher value angular speed required for disc without edge loading. With the effect of edge loading disc required lower angular speed. It has been seen that for incompressible material required higher angular speed for initial yielding as compare to disc made of compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore. From Chapter Eight,It is found that the anisotropy of the material has little effect on radial stress but the effect is more prominent on the axial and tangential stresses for higher ratio of anisotropic constants along the radius. The results indicate the maximum stress is not always on the surface. 84 pp. Englisch. Seller Inventory # 9783846551271
Buy New
US$ 56.32
US$ 25.67 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 2 available
Stock Image
Research Problems in Mechanical Engineering: Transitional.
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Softcover
Seller: Books Puddle, Woodside, NY, U.S.A.
Seller rating 4 out of 5 stars
Condition: New. Seller Inventory # 26358630939
Stock Image
Research Problems in Mechanical Engineering: Transitional.
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Softcover
Seller: Majestic Books, Hounslow, United Kingdom
Seller rating 4 out of 5 stars
Condition: New. Print on Demand. Seller Inventory # 353892804
Buy New
US$ 87.80
US$ 8.59 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 4 available
Seller Image
Research Problems in Mechanical Engineering
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Thakur PankajDr Pankaj, Sr. A.P. & Research Coordinator, Department Of Mathematics, Indus International University Una, Himachal Pradesh, India, Honorary Fellow awarded by Australian Institute of High Energetic Material, 2011 Editor . Seller Inventory # 5498475
Buy New
US$ 47.18
US$ 54.67 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Research Problems in Mechanical Engineering : Transitional Stresses
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Research Problems in Mechanical Engineering has been solved by Using Seths, B.R. Theory. From chapter seven, It has been seen that higher value angular speed required for disc without edge loading. With the effect of edge loading disc required lower angular speed. It has been seen that for incompressible material required higher angular speed for initial yielding as compare to disc made of compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore. From Chapter Eight,It is found that the anisotropy of the material has little effect on radial stress but the effect is more prominent on the axial and tangential stresses for higher ratio of anisotropic constants along the radius. The results indicate the maximum stress is not always on the surface. Seller Inventory # 9783846551271
Buy New
US$ 62.89
US$ 39.06 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available
Stock Image
Research Problems in Mechanical Engineering: Transitional.
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Softcover
Seller: Biblios, Frankfurt am main, HESSE, Germany
Seller rating 4 out of 5 stars
Condition: New. PRINT ON DEMAND. Seller Inventory # 18358630929
Buy New
US$ 93.24
US$ 11.10 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 4 available
Seller Image
Research Problems in Mechanical Engineering
Published by
LAP LAMBERT Academic Publishing Nov 2011, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Research Problems in Mechanical Engineering has been solved by Using Seths, B.R. Theory. From chapter seven, It has been seen that higher value angular speed required for disc without edge loading. With the effect of edge loading disc required lower angular speed. It has been seen that for incompressible material required higher angular speed for initial yielding as compare to disc made of compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore. From Chapter Eight,It is found that the anisotropy of the material has little effect on radial stress but the effect is more prominent on the axial and tangential stresses for higher ratio of anisotropic constants along the radius. The results indicate the maximum stress is not always on the surface.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 84 pp. Englisch. Seller Inventory # 9783846551271
Buy New
US$ 56.32
US$ 66.96 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available
Seller Image
Research Problems in Mechanical Engineering | Transitional Stresses
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Research Problems in Mechanical Engineering | Transitional Stresses | Pankaj Thakur | Taschenbuch | 84 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783846551271 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 106721934
Buy New
US$ 49.88
US$ 78.12 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 5 available
Stock Image
Research Problems in Mechanical Engineering: Transitional Stresses
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846551279
ISBN 13: 9783846551271
New
paperback
Seller: Mispah books, Redhill, SURRE, United Kingdom
Seller rating 4 out of 5 stars
paperback. Condition: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Seller Inventory # ERICA82938465512796
Buy New
US$ 202.73
US$ 33.02 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available