Synopsis
This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it’s not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam.
"synopsis" may belong to another edition of this title.
Search results for Calculation Methods Applied in the Design of Reinforced...
Seller Image
Calculation Methods Applied in the Design of Reinforced Concrete Beams
Published by
LAP LAMBERT Academic Publishing Apr 2019, 2019
ISBN 10: 6200080844
ISBN 13: 9786200080844
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it's not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam. 56 pp. Englisch. Seller Inventory # 9786200080844
Buy New
US$ 47.78
US$ 26.74 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 2 available
Stock Image
Calculation Methods Applied in the Design of Reinforced Concrete Beams
Published by
LAP LAMBERT Academic Publishing, 2019
ISBN 10: 6200080844
ISBN 13: 9786200080844
New
Paperback
Seller: Revaluation Books, Exeter, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Brand New. 56 pages. 8.66x5.91x0.13 inches. In Stock. Seller Inventory # zk6200080844
Buy New
US$ 80.97
US$ 13.43 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Seller Image
Calculation Methods Applied in the Design of Reinforced Concrete Beams
Published by
LAP LAMBERT Academic Publishing, 2019
ISBN 10: 6200080844
ISBN 13: 9786200080844
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 289724434
Buy New
US$ 41.01
US$ 56.95 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Calculation Methods Applied in the Design of Reinforced Concrete Beams
Published by
LAP LAMBERT Academic Publishing Apr 2019, 2019
ISBN 10: 6200080844
ISBN 13: 9786200080844
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it's not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 56 pp. Englisch. Seller Inventory # 9786200080844
Buy New
US$ 47.78
US$ 69.75 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available
Seller Image
Calculation Methods Applied in the Design of Reinforced Concrete Beams
Published by
LAP LAMBERT Academic Publishing, 2019
ISBN 10: 6200080844
ISBN 13: 9786200080844
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it's not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam. Seller Inventory # 9786200080844
Buy New
US$ 48.97
US$ 70.34 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available
Seller Image
Calculation Methods Applied in the Design of Reinforced Concrete Beams
Published by
LAP LAMBERT Academic Publishing, 2019
ISBN 10: 6200080844
ISBN 13: 9786200080844
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Calculation Methods Applied in the Design of Reinforced Concrete Beams | Edson Fernando Castanheira Rodrigues (u. a.) | Taschenbuch | 56 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786200080844 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 116760585
Buy New
US$ 43.41
US$ 81.38 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 5 available