Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The electric discharge machine is an electro-thermal machining process, in which electric energy is used to generate the spark between the workpiece and electrode. The material is removed due to thermal energy which is caused by the electric spark. Electric discharge machine is used for machining of high strength temperature resistant alloys and the material which are difficult to machine in other machining processes. In EDM, since there is no direct contact between the workpiece and the electrode, hence there are no mechanical forces existing between them. Any type of conductive material can be machined using EDM irrespective of the hardness or toughness of the material. In the present work, the optimization of four EDM process parameters like discharge current, pulse-on -time, voltage and duty cycle for high-speed steel(AISI-M2) is done by performing experiments using response surface method(RSM) in order to maximize the material removal rate and at the same time minimize the tool wear and minimize the surface roughness. After the optimization results are appraised through the ANOVA test. 132 pp. Englisch. Seller Inventory # 9786202524476

Contact seller

Buy New

US$ 69.53

Convert currency

Shipping: US$ 25.08

From Germany to U.S.A.

Destination, rates & speeds

Quantity: 2 available

Add to basket

Seller Image

Optimization Of Electric Discharge Machining : Optimization Process

Harsimran Singh Sodhi

Published by LAP LAMBERT Academic Publishing, 2020

ISBN 10: 6202524472 ISBN 13: 9786202524476

New Taschenbuch

Print on Demand

Seller: AHA-BUCH GmbH, Einbeck, Germany

Seller rating 5 out of 5 stars

Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The electric discharge machine is an electro-thermal machining process, in which electric energy is used to generate the spark between the workpiece and electrode. The material is removed due to thermal energy which is caused by the electric spark. Electric discharge machine is used for machining of high strength temperature resistant alloys and the material which are difficult to machine in other machining processes. In EDM, since there is no direct contact between the workpiece and the electrode, hence there are no mechanical forces existing between them. Any type of conductive material can be machined using EDM irrespective of the hardness or toughness of the material. In the present work, the optimization of four EDM process parameters like discharge current, pulse-on -time, voltage and duty cycle for high-speed steel(AISI-M2) is done by performing experiments using response surface method(RSM) in order to maximize the material removal rate and at the same time minimize the tool wear and minimize the surface roughness. After the optimization results are appraised through the ANOVA test. Seller Inventory # 9786202524476

Contact seller

Buy New

US$ 70.36

Convert currency

Shipping: US$ 31.70

From Germany to U.S.A.

Destination, rates & speeds

Quantity: 1 available

Add to basket

Seller Image

Optimization Of Electric Discharge Machining

Harsimran Singh Sodhi

Published by LAP LAMBERT Academic Publishing, 2020

ISBN 10: 6202524472 ISBN 13: 9786202524476

New Softcover

Print on Demand

Seller: moluna, Greven, Germany

Seller rating 5 out of 5 stars

Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Sodhi Harsimran SinghHarsimran Singh Sodhi is working as an Assistant Professor in the Mechanical Engineering Department of Chandigarh University. The author is having more than 12years of experience in Academia, research, and Indust. Seller Inventory # 385946156

Contact seller