Dynamic Analysis of Drive Shaft: A study on Modeling of the component using different composites - Softcover
Synopsis
A drive shaft is basically a mechanical component which transmits torque and rotation, and is used to connect other mechanical components of a drive train which cannot be connected in a direct manner due to the distance or with other reason i.e., the need for allowing the relative movement between them. Due to torque carriers, drive shafts will be subjected to torsion and shear stress, which is equivalent to the difference between the input torque and the load. Hence drive shaft must, therefore, be strong enough to withstand the stress, while avoiding too much additional weight as that would, in turn, increase their inertia. The project deals with the replacement of conventional drive shaft of steel material with high strength carbon composites. Steel drive shaft is designed using CAD software for the purpose of static, buckling and modal analysis of both drive shaft using ANSYS software.The design optimization was done at the end which showed significant potential improvement in the performance of the drive shaft. In the current work, an attempt has been made to estimate the deflection, stresses, and natural frequencies under subjected loads.
"synopsis" may belong to another edition of this title.
Search results for Dynamic Analysis of Drive Shaft: A study on Modeling...
Seller Image
Dynamic Analysis of Drive Shaft
Published by
LAP LAMBERT Academic Publishing Nov 2020, 2020
ISBN 10: 6203042145
ISBN 13: 9786203042146
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -A drive shaft is basically a mechanical component which transmits torque and rotation, and is used to connect other mechanical components of a drive train which cannot be connected in a direct manner due to the distance or with other reason i.e., the need for allowing the relative movement between them. Due to torque carriers, drive shafts will be subjected to torsion and shear stress, which is equivalent to the difference between the input torque and the load. Hence drive shaft must, therefore, be strong enough to withstand the stress, while avoiding too much additional weight as that would, in turn, increase their inertia. The project deals with the replacement of conventional drive shaft of steel material with high strength carbon composites. Steel drive shaft is designed using CAD software for the purpose of static, buckling and modal analysis of both drive shaft using ANSYS software.The design optimization was done at the end which showed significant potential improvement in the performance of the drive shaft. In the current work, an attempt has been made to estimate the deflection, stresses, and natural frequencies under subjected loads. 60 pp. Englisch. Seller Inventory # 9786203042146
Buy New
US$ 47.01
US$ 26.31 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 2 available
Seller Image
Dynamic Analysis of Drive Shaft
Published by
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6203042145
ISBN 13: 9786203042146
New
Kartoniert / Broschiert
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Kartoniert / Broschiert. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Ramarao B. S. VDr. BSV Ramarao is currently working as a Professor and HoD at Pragati Engineering College. He is member of few professional bodies and acting as a reviewer for few UGC journals. Dr. DV Sreekanth is currently working a. Seller Inventory # 452571916
Buy New
US$ 40.35
US$ 56.03 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Dynamic Analysis of Drive Shaft
Published by
LAP LAMBERT Academic Publishing Nov 2020, 2020
ISBN 10: 6203042145
ISBN 13: 9786203042146
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -A drive shaft is basically a mechanical component which transmits torque and rotation, and is used to connect other mechanical components of a drive train which cannot be connected in a direct manner due to the distance or with other reason i.e., the need for allowing the relative movement between them. Due to torque carriers, drive shafts will be subjected to torsion and shear stress, which is equivalent to the difference between the input torque and the load. Hence drive shaft must, therefore, be strong enough to withstand the stress, while avoiding too much additional weight as that would, in turn, increase their inertia. The project deals with the replacement of conventional drive shaft of steel material with high strength carbon composites. Steel drive shaft is designed using CAD software for the purpose of static, buckling and modal analysis of both drive shaft using ANSYS software.The design optimization was done at the end which showed significant potential improvement in the performance of the drive shaft. In the current work, an attempt has been made to estimate the deflection, stresses, and natural frequencies under subjected loads.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 60 pp. Englisch. Seller Inventory # 9786203042146
Buy New
US$ 47.01
US$ 68.62 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available
Seller Image
Dynamic Analysis of Drive Shaft : A study on Modeling of the component using different composites
Published by
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6203042145
ISBN 13: 9786203042146
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - A drive shaft is basically a mechanical component which transmits torque and rotation, and is used to connect other mechanical components of a drive train which cannot be connected in a direct manner due to the distance or with other reason i.e., the need for allowing the relative movement between them. Due to torque carriers, drive shafts will be subjected to torsion and shear stress, which is equivalent to the difference between the input torque and the load. Hence drive shaft must, therefore, be strong enough to withstand the stress, while avoiding too much additional weight as that would, in turn, increase their inertia. The project deals with the replacement of conventional drive shaft of steel material with high strength carbon composites. Steel drive shaft is designed using CAD software for the purpose of static, buckling and modal analysis of both drive shaft using ANSYS software.The design optimization was done at the end which showed significant potential improvement in the performance of the drive shaft. In the current work, an attempt has been made to estimate the deflection, stresses, and natural frequencies under subjected loads. Seller Inventory # 9786203042146
Buy New
US$ 48.17
US$ 69.24 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 1 available
Seller Image
Dynamic Analysis of Drive Shaft | A study on Modeling of the component using different composites
Published by
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6203042145
ISBN 13: 9786203042146
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Dynamic Analysis of Drive Shaft | A study on Modeling of the component using different composites | B. S. V Ramarao (u. a.) | Taschenbuch | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786203042146 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 119513840
Buy New
US$ 41.94
US$ 80.06 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: 5 available