The Commands Guide Tutorial for SolidWorks 2010 is a comprehensive reference book written to assist beginner to intermediate users of SolidWorks. SolidWorks is an immense software package, and no one book can cover all topics for all users. The book provides a centralized reference location to address many of the System and Document properties, FeatureManagers, PropertyManagers, ConfigurationManagers and RenderManagers along with 2D and 3D Sketch tools, Sketch entities, 3D Feature tools, Motion Study, SustainabilityXpress, DFMXpress, SimulationXpress, Sheet Metal, PhotoView 360 and more.
Chapter 1 provides a basic overview of the concepts and terminology used throughout this book using SolidWorks 2010 software. If you are completely new to SolidWorks, you should read Chapter 1 in detail and complete Lesson 1, Lesson 2 and Lesson 3 in the SolidWorks Tutorials.
If you are familiar with an earlier release of SolidWorks, you still might want to skim Chapter 1 to become acquainted with some of the commands, menus and features that you have not used; or you can simply jump to any section in any chapter.
Each chapter (17 total) provides detailed PropertyManager information on key topics with individual stand alone short tutorials to reinforce and demonstrate the functionality and ease of the SolidWorks tool or feature. All models for the 230 plus tutorials are located on the enclosed CD with their solution (initial and final). Learn by doing, not just by reading!
Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, design tables, configurations and more.
The book is designed to compliment the Online Tutorials and Online Help contained in SolidWorks 2010. The goal is to illustrate how multiple design situations and systematic steps combine to produce successful designs.
The authors developed the tutorials by combining their own industry experience with the knowledge of engineers, department managers, vendors and manufacturers. These professionals are directly involved with SolidWorks everyday. Their responsibilities go far beyond the creation of just a 3D model.
Table of Contents
Introduction
1. Quick Start
2. SolidWorks System Options
3. SolidWorks Document Properties
4. Design Intent, Sketching and Sketch Entities
5. Sketch Tools, Geometric Relations and Dimensions/Relations tools
6. Extruded Boss/Base, Extruded Cut, Fillet and Cosmetic Features
7. Revolved, Simple Hole, Hole Wizard and Dome Features
8. Shell, Draft and Rib Features
9. Pattern and Mirror Features
10. Swept, Loft, Wrap and Flex Features
11. Bottom-Up Assembly Modeling and more
12. Top-Down Assembly Modeling and more
13. 2D Drawings and eDrawings
14. Sheet Metal
15. PhotoView 360
16. SolidWorks Design Library, Explorer, Toolbox and Measure tool
17. SimulationXpress & SustainabilityXpress
David Planchard is the Founder of D&M Education LLC. Before starting D&M Education, he spent over 27 years in industry and academia holding various engineering, marketing, and teaching positions and degrees. He holds five U.S. patents and one International patent. He has published and authored numerous papers on Machine Design, Product Design, Mechanics of Materials, and Solid Modeling. He is an active member of the SolidWorks Users Group and the American Society of Engineering Education (ASEE). David holds a BSME, MSM with the following Professional Certifications: CCAI, CCNA, CCNP, and CSWA. David is a SolidWorks Solution Partner and an Adjunct Faculty member at Worcester Polytechnic Institute in the Mechanical Engineering department.
Marie Planchard is the Director of World Education Markets at SolidWorks Corporation. Before she joined SolidWorks, Marie spent over 10 years as an engineering professor at Mass Bay College in Wellesley Hills, MA. She has 14 plus years of industry software experience and held a variety of management and engineering positions. Marie holds a BSME, MSME and a Certified SolidWorks Professional (CSWP) Certification. She is an active member of the American Society of Mechanical Engineers (ASME) and the American Society for Engineering Education (ASEE).
David and Marie Planchard are co-authors of the following books:
- A Commands Guide for SolidWorks 2010, 2009, 2008, and 2007
- Assembly Modeling with SolidWorks 2010, 2008, 2006, 2005-2004, 2003 and 2001Plus
- Drawing and Detailing with SolidWorks 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002 and 2001/2001Plus
- Engineering Design with SolidWorks with Multimedia CD 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2001Plus, 2001 and 1999
- Engineering Graphics with SolidWorks 2010 with Multimedia CD
- SolidWorks: The Basics with Multimedia CD 2009, 2008, 2007, 2006, 2005, 2004 and 2003
- SolidWorks Tutorial with Multimedia CD 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003 and 2001/2001Plus
- The Fundamentals of SolidWorks: Featuring the VEXplorer robot, 2008 and 2007
- Official Certified SolidWorks Associate Examination Guide, Version 2, Version 1
- Applications in Sheet Metal Using Pro/SHEETMETAL & Pro/ENGINEER
