Controlled low-strength material using thermal power plant ash

Naganathan, Sivakumar, Jamali, Shojaeddin

ISBN 10: 3659618829 / ISBN 13: 9783659618826

Published by LAP LAMBERT Academic Publishing, 2014

About this Item

NEW. SHIPS FROM MULTIPLE LOCATIONS.

Seller Inventory # ERICA82936596188296

Bibliographic Details

• Title: Controlled low-strength material using thermal power plant ash
• Publisher: LAP LAMBERT Academic Publishing
• Publication Date: 2014
• Language: English
• ISBN 10: 3659618829
• ISBN 13: 9783659618826
• Binding: paperback
• Condition: New
• Book Type: book

About this title

Synopsis

Controlled low strength material (CLSM) is self-compacting flowable fill which is primarily used as backfill. This book presents the investigation done on CLSM mixtures made using NaOH, lime, bottom ash, fly ash, and water. A series of experiments on fresh state, viz. flowability, fresh density, segregation resistance and bleeding were conducted. The CLSM mixtures were also tested for water absorption, hardened density, ultrasonic pulse velocity and compressive strength at hardened state. The flowability of all samples is 300 ± 20 mm and increase in FA/binder ratio reduces the flowability of mixture. All the CLSM mixtures were classified as normal weight. All samples had good segregation resistance with non-corrosive behavior. Durability properties of CLSM were satisfactory. Compressive strength of mixtures varied between 1.1 MPa to 3.35 MPa. Increment of lime and NaOH leads to increment in strength only at certain ratios. It is concluded that the CLSM mixtures produced in the investigation are cement-free, has good mechanical and durability properties and can be used in practical applications.

About the Author

Dr. Sivakumar Naganathan is working as an Associate Professor in the department of civil engineering, Universiti Tenaga Nasional (UNITEN), Malaysia. Mr. Shojaeddin Jamali is an alumni of UNITEN, currently working in the construction industry.