Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS

Shahi, Aref; Heidari, Maziar; Aghaee, Hamed

ISBN 10: 3659791431 / ISBN 13: 9783659791437

Published by LAP LAMBERT Academic Publishing, 2015

About this Item

Seller Inventory # 18405909564

Bibliographic Details

• Title: Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
• Publisher: LAP LAMBERT Academic Publishing
• Publication Date: 2015
• Language: English
• ISBN 10: 3659791431
• ISBN 13: 9783659791437
• Binding: Soft cover
• Condition: New

About this title

Synopsis

Ethylene is widely used in chemical industry, and its worldwide production(over 109 million tonnes in 2006) exceeds that of any other organic compound. Commercially ethylene is obtained by(1)thermal cracking of hydrocarbons such as ethane, propane, butane, naphtha, kerosene, gasoil, crude oil,etc,(2) auto thermic cracking (partial oxidation) of the above hydrocarbons,(3)recovery from refinery off-gas,(4) recovery from coke-oven gas, and(5) catalytic dehydration of ethyl alcohol or ethyl ether. The thermal cracking process is the most interesting process to produce ethylene commercially .At this project production of ethylene from naphtha is studied. Naphtha, an important feedstock for ethylene production, is a collective of liquid hydrocarbon intermediate oil refining products. It is a mixture of hydrocarbons in the boiling point range of 30-200ºC. it is fed to the naphtha cracking furnace. Then, the cracked gas is fed to gasoline fractionator, where it separates the quench oil as a bottom and the cracked gasoline and lighter components as the overhead products. Then, the overhead products are separated in different column.

About the Author

Aref Shahi: M.Sc in Chemical Engineering, Abadan Petroleum University of Technology,2014.B.Sc in Chemical Engineering,Babol Noshirvani University of Technology,2012.Three years, industry oriented Research with focus on pyrolysis of polymers, Heavy Vacuum Gas Oil, environmental friendly processes, CFD modeling, process simulation and optimization.