Digital Systems Design Using Verilog

Roth, Charles; John, Lizy K.; Kil Lee, Byeong

ISBN 10: 1285051076 / ISBN 13: 9781285051079

Published by Cengage Learning, 2016

About this Item

Hardcover shows only light cover wear. Text is unmarked and binding tight. Ships FAST! Seller Inventory # 2212040017

Bibliographic Details

Title: Digital Systems Design Using Verilog

Publisher: Cengage Learning

Publication Date: 2016

Binding: hardcover

Condition: Very Good

About this title

Synopsis:

Master the process of designing and testing new hardware configurations with DIGITAL SYSTEMS DESIGN USING VERILOG. This practical book integrates coverage of logic design principles, Verilog as a hardware design language, and FPGA implementation. The authors present Verilog constructs side-by-side with hardware, encouraging you to think in terms of desired hardware while writing synthesizable Verilog. Following a review of the basic concepts of logic design, the authors introduce the basics of Verilog using simple combinational circuit examples, followed by models for simple sequential circuits. Subsequent chapters ask you to tackle more and more complex designs.

About the Authors:

Charles Roth is Professor Emeritus in Electrical and Computer Engineering at the University of Texas at Austin, where he taught Digital Design for more than four decades. He is the author of Fundamentals of Logic Design, which is in its sixth edition, and Digital Systems Design using VHDL, which is in its second edition.

Lizy John is the B. N. Gafford Professor in Electrical and Computer Engineering at the University of Texas at Austin. Dr. John has been teaching and conducting research in computer architecture and digital systems design for almost two decades. She has coauthored DIGITAL SYSTEMS DESIGN USING VHDL and DIGITAL SYSTEMS DESIGN USING VERILOG and has edited several successful books on computer performance evaluation and workload characterization. She is an IEEE Fellow.

Byeong Kil Lee is Assistant Professor in Electrical and Computer Engineering at the University of Texas at San Antonio, teaching digital design and computer architecture. Before joining academia two years ago, he worked for Texas Instruments for five years. He has several years of industry Verilog design experience.