Electronic Design Automation for Integrated Circuits Handbook, Second Edition - Two Volume Set
New - Soft cover
Condition: New
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketDieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Luciano Lavagno received his PhD in electrical engineering and computer sciences from the University of California, Berkeley, USA (UC Berkeley), in 1992, and from Politecnico di Torino, Italy, in 1993. He is a coauthor of two books on as.
Seller Inventory # 639191658
Comprised of two volumes, Electronic Design Automation for Integrated Circuits Handbook, Second Edition addresses all major areas of EDA for integrated circuits (ICs). Chapters contributed by leading experts authoritatively discuss an array of topics ranging from system design to physical implementation.
New to This Edition:
Offering improved depth and modernity, Electronic Design Automation for Integrated Circuits Handbook, Second Edition – Two-Volume Set provides a valuable, state-of-the-art reference for EDA students, researchers, and professionals.
Luciano Lavagno received his PhD in electrical engineering and computer sciences from the University of California, Berkeley, USA (UC Berkeley), in 1992, and from Politecnico di Torino, Italy, in 1993. He is a coauthor of two books on asynchronous circuit design, a book on hardware/software codesign of embedded systems, more than 200 scientific papers, and 12 US patents. Between 1993 and 2000, he was the architect of the POLIS project, a cooperation between UC Berkeley, Cadence Design Systems, Magneti Marelli, and Politecnico di Torino, which developed a complete hardware/software codesign environment for control-dominated embedded systems. Between 2003 and 2014, he was one of the creators and architects of the Cadence C-to-Silicon high-level synthesis system. Since 2011, he has been a full professor with Politecnico di Torino. He has been serving on the technical committees of several international conferences, workshops, and symposia. He has been the technical program chair of the Design Automation Conference, and the technical program committee and general chair of the International Conference on Hardware/Software Codesign and System Synthesis. He has been an associate editor of the Institute of Electrical and Electronics Engineers (IEEE) Transactions on Circuits and Systems and Association for Computing Machinery (ACM) Transactions on Embedded Computing. He is a senior member of the IEEE. His research interests include the synthesis of asynchronous low-power circuits, the concurrent design of mixed hardware and software embedded systems, the high-level synthesis of digital circuits, the design and optimization of hardware components and protocols for wireless sensor networks (WSNs), and design tools for WSNs.
Igor L. Markov is currently on leave from the University of Michigan, Ann Arbor, USA, where he taught for many years. He joined Google in 2014 and occasionally teaches very-large-scale integration design at Stanford University, California, USA. He researches computers that make computers, including algorithms and optimization techniques for electronic design automation, secure hardware, and emerging technologies. He is an Institute of Electrical and Electronics Engineers (IEEE) fellow and an Association for Computing Machinery (ACM) distinguished scientist. He has coauthored five books, and has four U.S. patents and more than 200 refereed publications, some of which were honored by best-paper awards. Professor Markov is a recipient of the Design Automation Conference Fellowship, ACM Special Interest Group on Design Automation Outstanding New Faculty Award, National Science Foundation Faculty Early Career Development Program Award, IBM Partnership Award, Microsoft A. Richard Newton Breakthrough Research Award, and IEEE Council on Electronic Design Automation Early Career Award. During the 2011 redesign of the ACM Computing Classification System, Professor Markov led the effort on the hardware tree. Twelve doctoral dissertations were defended under his supervision; three of which received outstanding dissertation awards.
Grant E. Martin is a distinguished engineer at Cadence Design Systems, Inc., San Jose, California, USA. Before that, Grant worked for Burroughs in Scotland for 6 years; Nortel/Bell-Northern Research in Canada for 10 years; Cadence Design Systems for 9 years, eventually becoming a fellow in their labs; and Tensilica for 9 years. He rejoined Cadence in 2013 when it acquired Tensilica, and has been there since, working in the Tensilica part of the Cadence Intellectual Property Group. He received his bachelor’s and master’s degrees in mathematics (combinatorics and optimization) from the University of Waterloo, Ontario, Canada, in 1977 and 1978. Grant has coauthored and coedited several books, including the first-ever book on system-on-chip (SoC) design published in Russian. He has also presented many papers, talks, and tutorials, and participated in panels at a number of major conferences. He cochaired the VSI Alliance Embedded Systems Study Group in the summer of 2001, and was cochair of the Design Automation Conference Technical Program Committee for Methods for 2005 and 2006. He is also a coeditor of the Springer Embedded Systems series. His particular areas of interest include system-level design, intellectual property-based design of SoC, platform-based design, digital signal processing, baseband and image processing, and embedded software. He is a senior member of the Institute of Electrical and Electronics Engineers.
Louis K. Scheffer received his BS and MS from the California Institute of Technology, Pasadena, USA, in 1974 and 1975, and his PhD from Stanford University, California, USA, in 1984. He worked at Hewlett Packard from 1975 to 1981 as a chip designer and computer-aided design tool developer. In 1981, he joined Valid Logic Systems, where he did hardware design, developed a schematic editor, and built an integrated circuit layout, routing, and verification system. In 1991, Valid merged with Cadence Design Systems, after which Dr. Scheffer worked on place and route, floorplanning systems, and signal integrity issues until 2008. In 2008, Dr. Scheffer switched fields to neurobiology, studying the structure and function of the brain by using electron microscope images to reconstruct its circuits. He is currently affiliated with the Howard Hughes Medical Institute, Ashburn, Virginia, USA. As electronic design automation (EDA) is no longer his daily staple (though his research uses a number of algorithms derived from EDA), he is extremely grateful to Igor Markov for taking on this portion of these books. Lou is also interested in the Search for Extraterrestrial Intelligence (SETI), serves on the technical advisory board for the Allen Telescope Array at the SETI Institute, and has coauthored the book SETI-2020, in addition to several technical articles in the field.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
Order quantity | 16 to 45 business days | 16 to 45 business days |
---|---|---|
First item | US$ 57.13 | US$ 57.13 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.