FEASIBILITY STUDY OF USING PULSATING HEAT PIPES IN WASTE HEAT RECOVERY: AN ECONOMICAL TECHNIQUE TO CAPTURE WASTE HEAT AND APPLY IT FOR FURTHER INDUSTRIAL APPLICATIONS THEREBY SAVING ENERGY

BARUA, PRANAB

ISBN 10: 3843364818 / ISBN 13: 9783843364812

Published by LAP LAMBERT Academic Publishing, 2010

About this Item

LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS.

Seller Inventory # ERICA78738433648186

Bibliographic Details

• Title: FEASIBILITY STUDY OF USING PULSATING HEAT PIPES IN WASTE HEAT RECOVERY: AN ECONOMICAL TECHNIQUE TO CAPTURE WASTE HEAT AND APPLY IT FOR FURTHER INDUSTRIAL APPLICATIONS THEREBY SAVING ENERGY
• Publisher: LAP LAMBERT Academic Publishing
• Publication Date: 2010
• Language: English
• ISBN 10: 3843364818
• ISBN 13: 9783843364812
• Binding: Paperback
• Condition: Like New
• Book Type: book

About this title

Synopsis

Heat pipe heat exchangers are very effective devices for waste heat recovery. To check for its efficiency, we must study the manner in which it helps to remove heat from a system concerned. The higher the heat removal rate, the more efficiently it can recover heat that would otherwise get wasted. In our work, it was chosen to establish mathematical models of fall of temperature with respect to time in the condenser section of pulsating heat pipes due to natural cooling from a certain higher temperature to the room temperature for various diameters of pipes made of copper and for various lengths of the evaporator section using water as the working fluid. We have found that temperature decreases exponentially in time both for single loop and for multiple loops. For a fixed length of the evaporator section, we have seen that temperature falls faster for smaller diameter of the pipe. The rate of change of temperature has been seen to rise with increase in the number of turns in the evaporator section. We have found further that the instantaneous failure rate of falling temperature rises exponentially with increase in the number of turns in the evaporator section.

About the Author

Pranab K. Barua completed his B. Tech. in Mechanical Engineering from Sikkim Manipal Institute of Technology, Gangtok, India in 2007. He completed his M. Tech. in Energy Technology from Tezpur University, India in 2009. He is planning to join the Universities of Auckland and Edinburgh as a Universitas-21 Ph.D. student.