Heat Transfer Enhancement | An Experimental Study on Heat transfer performance of Double pipe Heat Exchanger using TMT Rods as Inserts

Jitendra Kumar Patro (u. a.)

ISBN 10: 3659203696 / ISBN 13: 9783659203695

Published by LAP LAMBERT Academic Publishing, 2012

About this Item

Heat Transfer Enhancement | An Experimental Study on Heat transfer performance of Double pipe Heat Exchanger using TMT Rods as Inserts | Jitendra Kumar Patro (u. a.) | Taschenbuch | 80 S. | Englisch | 2012 | LAP LAMBERT Academic Publishing | EAN 9783659203695 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Seller Inventory # 106305751

Bibliographic Details

• Title: Heat Transfer Enhancement | An Experimental Study on Heat transfer performance of Double pipe Heat Exchanger using TMT Rods as Inserts
• Publisher: LAP LAMBERT Academic Publishing
• Publication Date: 2012
• Language: English
• ISBN 10: 3659203696
• ISBN 13: 9783659203695
• Binding: Taschenbuch
• Condition: Neu
• Dimensions: 220W x 150H x 6D millimeters 220 millimeters width by 150 millimeters height by 6 millimeters depth
• Weight: 137 grams
• Seller catalogs:
  • Bücher

About this title

Synopsis

Over the last few decades, Energy saving has been a major concern in every process Industry. A slight saving in Energy can benefit in crores of money. Energy savings are of primary importance in the design of Heat exchangers leading to more efficient and Environment friendly devices. The book summarizes the comprehensive research on Heat Transfer Enhancement using a new technique using TMT rods as inserts. Enhancement is a practice of modifying the surface to increase the heat transfer coefficient between the surface and the fluid. Experiments were carried out under two conditions of Rod inserts with and without baffles in the tube side flow of a double pipe heat Exchanger and the results are compared with a smooth tube DPHE. Rod inserts act as a turbulence promoter. It mixes the boundary fluid and the bulk fluid and thus reduces the boundary layer thickness. The effect of inserts on the heat transfer coefficient and the pressure drop were investigated at different flow rates. This technique can enhance the heat transfer coefficient by about 2.5 times with a very low fabrication cost.

About the Author

Jitendra K. Patro, B.TECH:completed Chemical Engineering at National Institute of Technology, Rourkela in 2012.Currently a Management Trainee at Haldia Petrochemicals Limited, West Bengal, IndiaAbhinav Malviya, B.TECH:completed Chemical Engineering at National Institute of Technology, Rourkela in 2012.Currently a system Engineer at Infosys,India.