Hybrid Particle Laden Flow Modelling : A joint domain combination of Eulerian solid phase and Lagrangian discrete particle simulations

David Schellander

ISBN 10: 3656501823 / ISBN 13: 9783656501824

Published by GRIN Verlag, 2013

About this Item

Druck auf Anfrage Neuware - Printed after ordering - Doctoral Thesis / Dissertation from the year 2013 in the subject Engineering - Mechanical Engineering, grade: 1, University of Linz (Department on Particulate Flow Modelling), language: English, abstract: The numerical hybrid model EUgran+, which is an Eulerian-Eulerian granular phase model extended with models from the Eulerian-Lagrangian model for dense rapid particulate flows, is modified to account for poly-dispersed particle diameter distributions. These modifications include the implementation of I) a new poly-dispersed drag law and of II) new particle boundary conditions distinguishing between sliding and non-sliding particle-wall collisions and III) a new implementation of the population balance equation in the agglomeration model using the Eulerian-Lagrangian approach, referred to as Bus-stop model. Further, the applicability of the EUgran+ model is extended to cover dilute to dense poly-disperse particulate flows. Furthermore, this provides an improvement in the numerical simulation of dust separation and the formation of particle strands in industrial scale cyclones. In this PHD thesis, the EUgran+Poly model is validated at 3 specific cases with different mass loadings: I) poly-dispersed particle conveying in a square pipe with a 90 degree bend at low mass loading (L = 0:00206); II) a particle conveying case in a rectangular pipe with a double-loop at high mass loading (L = 1:5); III) in a vertical pipe the implementation of the agglomeration model is validated. To show the applicability of the presented models a simulation of an industrial cyclone in experimental scale is presented. The validation and application shows that considering a poly-disperse Eulerian-Eulerian granular phase improves the accordance of the simulation results with measurements significantly. Finally, the hybrid model is a good compromise for a computational efficient simulation of particulate transport and separation with differe.

Seller Inventory # 9783656501824

Bibliographic Details

• Title: Hybrid Particle Laden Flow Modelling : A joint domain combination of Eulerian solid phase and Lagrangian discrete particle simulations
• Publisher: GRIN Verlag
• Publication Date: 2013
• Language: English
• ISBN 10: 3656501823
• ISBN 13: 9783656501824
• Binding: Taschenbuch
• Condition: Neu
• Dimensions: 210W x 148H x 12D millimeters 210 millimeters width by 148 millimeters height by 12 millimeters depth
• Weight: 236 grams

About this title

Synopsis

Doctoral Thesis / Dissertation from the year 2013 in the subject Engineering - Mechanical Engineering, grade: 1, University of Linz (Department on Particulate Flow Modelling), language: English, abstract: The numerical hybrid model EUgran+, which is an Eulerian-Eulerian granular phase model extended with models from the Eulerian-Lagrangian model for dense rapid particulate flows, is modified to account for poly-dispersed particle diameter distributions. These modifications include the implementation of I) a new poly-dispersed drag law and of II) new particle boundary conditions distinguishing between sliding and non-sliding particle-wall collisions and III) a new implementation of the population balance equation in the agglomeration model using the Eulerian-Lagrangian approach, referred to as Bus-stop model. Further, the applicability of the EUgran+ model is extended to cover dilute to dense poly-disperse particulate flows. Furthermore, this provides an improvement in the numerical simulation of dust separation and the formation of particle strands in industrial scale cyclones. In this PHD thesis, the EUgran+Poly model is validated at 3 specific cases with different mass loadings: I) poly-dispersed particle conveying in a square pipe with a 90 degree bend at low mass loading (L = 0:00206); II) a particle conveying case in a rectangular pipe with a double-loop at high mass loading (L = 1:5); III) in a vertical pipe the implementation of the agglomeration model is validated. To show the applicability of the presented models a simulation of an industrial cyclone in experimental scale is presented. The validation and application shows that considering a poly-disperse Eulerian-Eulerian granular phase improves the accordance of the simulation results with measurements significantly. Finally, the hybrid model is a good compromise for a computational efficient simulation of particulate transport and separation with different mass loading regimes.