Imaging Sensors, Power Management, PLLs and Frequency Synthesizers | Advances in Analog Circuit Design 2023
Language: English
Published by Springer, 2025
- Softcover
- New
Condition: New
US$ 171.32
Quantity: 5 available
Add to basketItem description from seller
Imaging Sensors, Power Management, PLLs and Frequency Synthesizers | Advances in Analog Circuit Design 2023 | Kofi A. A. Makinwa (u. a.) | Taschenbuch | vi | Englisch | 2025 | Springer | EAN 9783031715617 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Seller Inventory # 135781705
- Title
- Imaging Sensors, Power Management, PLLs and Frequency Synthesizers | Advances in Analog Circuit Design 2023
- Author
- Kofi A. A. Makinwa (u. a.)
- Publisher
- Springer
- Publication year
- 2025
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 3031715616
- ISBN 13
- 9783031715617
- Item weight
- 522 grams
- Dimensions
- 235 x 155 x 19 mm
- Seller catalogs
- Bücher
This book is based on the 18 tutorials presented during the 31st workshop on Advances in Analog Circuit Design held in Villach, Austria. In it, expert designers share their insights on a variety of topics at the frontier of analog circuit design, with specific contributions focusing on the design of imaging sensors, power management circuits, PLLs and frequency synthesizers. As such, for anyone involved in analog circuit research and development, this book provides a valuable overview of the state-of-the-art.
"Synopsis" may belong to another edition of this title.
About the Author
Kofi Makinwa holds degrees from Obafemi Awolowo University, Ife, Nigeria (B.Sc. (1st class hons.), M.Sc.), and from the Philips International Institute, Eindhoven (M.E.E. (cum laude)) and Delft University of Technology, Delft (Ph.D.), both in the Netherlands. From 1989 to 1999, he was a Research Scientist with Philips Research Laboratories, Eindhoven. Since 1999, he has been at Delft University of Technology, where he is an Antoni van Leeuwenhoek Professor and the Head of the Microelectronics Department. His research interests include the design of mixed-signal circuits, sensor interfaces and smart sensors. This has led to 20+ books, 350+ technical papers, and 30+ patents.
Dr. Makinwa was the Analog Subcom chair (2018-2021) of the International Solid-State Circuits Conference (ISSCC), and has served on the technical program committees of several other IEEE conferences including IEEE Sensors, Transducers and the VLSI Symposium. He was a member of the editorial board of the Proceedings of the IEEE. He has been a two-term distinguished lecturer of the Solid-State Circuits Society and a two-term elected member of its Adcom. He is currently a member of the executive committee of the VLSI symposium and a co-chair of several editions of the Advances in Analog Circuit Design (AACD) workshop and the IEEE Sensor Interfaces Meeting (SIM). Dr. Makinwa is the co-recipient of 18 best paper awards, from the JSSC, ISSCC and the VLSI symposium among others. In 2023, at the 70th anniversary of ISSCC, he was recognized as being its all-time top contributor. He is a fellow of the IEEE and a member of the Royal Netherlands Academy of Arts and Sciences (KNAW).
Andrea Baschirotto graduated in Electronic Engineering (summa cum laude) from the University of Pavia in 1989. He received the Ph.D. degree in Electronic Engineering from the same university in 1994, and then became a Researcher (Assistant Professor). In 1998, he joined the Department of Innovation Engineering, University of Lecce, Italy, as an Associate Professor. He then joined the Department of Physics, University of Milan-Bicocca, Italy, in 2007 as an Associate Professor, where he is currently a Full Professor (2021) and the director of the Microelectronics Group. His main research interests are in the design of mixed-signal circuits for low-power and/or high-speed signal processing. He has authored or co-authored more than 500 papers in international journals and conferences, and he holds nearly 60 US patents. In addition, he has co-authored more than 120 papers originating from research collaborations on high-energy physics.
Dr. Baschirotto has served as an Associate Editor of both the Trans. Circuits and Systems I and II, and he has been an Associate Editor of the Journal of Solid-state Circuits (JSSC) since 2014. In 2002, he chaired the Technical Program Committee of the European Solid-State Circuit Conference (ESSCIRC). He was the JSSC Guest Editor for ESSCIRC 2003 and ESSCIRC 2007. He has been the general chair of IEEE-PRIME (2006, 2013) and of AACD (2008, 2013, 2016, 2019). He served for several years on the ESSCIRC TPC as the Data Converter Subcommittee Chairman and he was the General Chairman of ESSDERC/ESSCIRC 2022. He was the secretary of the European Committee of ISSCC. He has served on the technical program committees of several other international conferences including DATE and ASSCC. He is the founder and the Chairman of the IEEE Solid-State Circuit Society Italian Chapter, which received the 2020 Best SSCS Chapter Award. He is an IEEE Fellow (2013).
Bram Nauta received the M.Sc (cum laude) and Ph.D. degrees in Electrical Engineering from the University of Twente, Enschede, The Netherlands in 1987 and 1991, respectively. In 1991 he joined Philips Research Laboratories, Eindhoven the Netherlands. He returned to the University of Twente in 1998, where he is currently a distinguished professor and head of the IC Design group. From 2016 to 2020, he was the chair of the Electrical Engineering department. His research interests are in high-speed analog CMOS circuits, software-defined radio, cognitive radio and beamforming.
Dr. Nauta was the Editor-in-Chief (2007-2010) of the Journal of Solid-State Circuits (JSSC), and the 2013 program chair of the International Solid-State Circuits Conference (ISSCC). He was also the President of the Solid-State Circuits Society (2018-2019). He has been an Associate Editor of the Trans. on Circuits and Systems II (1997-1999), and of the JSSC (2001-2006). He was on the Technical Program Committee of the VLSI Symposium (2009-2013) and served on the steering committee and program committee (1999-2017) of the European Solid-State Circuit Conference (ESSCIRC). He also served on the program committee (2003-2013) and the Executive committee (2007-2015, 2022-today) of the ISSCC. He is a co-recipient of the 2002 and 2009 ISSCC Best European Paper award, and in 2023, he was recognized as a top 10 contributor. He served two terms as a distinguished lecturer of the Solid-State Circuits Society. In 2014, he received the "Simon Stevin Meester" award (500,000 Euros), the largest national prize in the Netherlands for achievements in engineering sciences. In 2019, he received an ERC (European Research Council) Advanced Grant (2.5 Million Euros). In 2023, he received the inaugural "Dutch Innovation Award" and the NWO Stevin Prize (1.5 Million Euros), the largest national science prize in the Netherlands for "exceptional success in knowledge exchange and impact on society". He is a fellow of the IEEE and a member of the Royal Netherlands Academy of Arts and Sciences (KNAW).
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 60 to 60 business days | 60 to 60 business days |
|---|---|---|
| First item | US$ 77.98 | US$ 77.98 |
Payment methods
- Paypal
Store description
preigu betreibt einen Onlineversandhandel mit über 1 Mio. Produkten in verschiedenen Sortimenten. Das Kernsortiment besteht aus Büchern, Medien und Spielwaren. Ein gelungenes Einkaufserlebnis ist das Ziel einer jeden Bestellung bei preigu, denn der Kunde und seine Zufriedenheit stehen an erster Stelle. preigu setzt daher auf einen kompetenten Kundenservice, funktionierende Prozesse und schnelle Reaktion.
Specialty
Bücher, SpielwarenSeller's business information
preigu GmbH & Co. KG
Lengericher Landstraße 19
Osnabrück, Germany 49078
Terms of sale
Standard Business Terms and customer information
I. Standard business terms
§ 1 Basic provisions
(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (preigu GmbH & Co. KG) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.
(2) A ‘consumer' in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities. The term ‘businessman' refers to every natural person, legal person or legally responsible partnership that concludes a legal transaction in pursuance of his/its independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The subject-matter of the contract is the selling of products .
(2) If an article is placed by us with AbeBooks or ZVAB, the activation of the page on AbeBooks or ZVAB shall involve the binding offer to conclude a contract under the terms and conditions contained in the article page.
(3) The contract shall become effective via the online shopping cart system as follows:
The products intended for purchase are moved to the "shopping cart". You can select the "Shopping Cart" using the appropriate buttons on the navigation bar and make changes there at any time.
After calling up the "Checkout" page and entering the required personal data and payment and shipping conditions, all order information is then displayed again on the order summary page.
Before submitting the order, you have the ability once more to review or change any information here (you may also use the "back" button on the Internet browser), or to cancel the purchase.
By clicking the "Buy now" button to submit the order, you declare your legally binding acceptance of the order which makes the contract effective.
(4) The execution of the order and the sending of all the details necessitated by the conclusion of the contract take place via e-mail, in a partially-automated manner. Consequently, you have to ensure that the e-mail address that you have deposited with us is the correct one, and that the receipt of the respective e-mails is guaranteed. In particular, you have to ensure that the respective e-mails are not blocked by a SPAM filter.
§ 3 Right of retention, reservation of proprietary rights
(1) You can only exercise a right of retention if the situation in question involves claims arising from the same contractual relationship.
(2) The goods remain our property until the purchase price is paid in full.
§ 4 Warranty
(1) The statutory warranty rights are applicable.
(2) As a consumer, you are requested to promptly check the product for completeness, visible defects and transport damage as soon as it is delivered, and promptly disclose your complaints to us and the shipping company in writing. Even if you do not comply with this request, it shall have no effect on your legal warranty claims.
(3) If a characteristic of the goods deviates from the objective requirements, the deviation shall only be deemed to be agreed if you were informed of the same by us before submitting the contractual declaration and the deviation was expressly and separately agreed between the contracting parties.
§ 5 Choice of law, place of fulfilment, jurisdiction
(1) German law shall apply. This choice of law only applies to customers if it does not result in the revocation of the protection guaranteed by the mandatory provisions of the law of the country in which the respective customer's usual place of residence is located (benefit-of-the-doubt principle).
(2) If you are not a consumer, but a businessman, a legal entity under public law or an institutional fund governed by public law, our place of business is the place of jurisdiction as well as the place of fulfilment for all services that follow from the business relationships that exist with us. The same condition applies to situations in which you are not associated with a general place of jurisdiction in Germany or the EU, as well as situations in which the place of residence or the usual place of residence is not known at the time of commencement of proceedings. This has no bearing on the capacity to call upon the court associated with another place of jurisdiction.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods are explicitly inapplicable.
II. Customer information
- Identity of the seller
preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany
Telephone: 0541-580 72 84
E-Mail: mail@preigu.de
We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.
- Information regarding the conclusion of the contract
The technical steps associated with the conclusion of the contract, the contract conclusion itself and the correction options are executed in accordance to the regulations "conclusion of the contract" in our standard business terms (part I.).
- Contractual language, saving the text of the contract
3.1 Contract language shall be English.
3.2 The complete text of the contract is not saved with us. Before the order is sent, the contract data can be printed out or electronically saved using the browser's print function. After the order is received by us, the order data, the legally-mandated details related to distance selling contracts and the standard business terms are re-sent to you via e-mail.
- Main features of the product or service
The key features of the goods and/or services can be found in the respective quote.
- Prices and payment arrangements
5.1 The prices mentioned in the respective offers represent total prices, as do the shipping costs. They include all the price components, including all the incidental taxes.
5.2 The dispatch costs that are incurred are not included in the purchase price. They can be viewed by clicking the appropriate button on our website or in the respective quote, are shown separately over the course of the order transaction and must additionally be borne by you, insofar as free delivery is not confirmed.
5.3 If delivery is made to countries outside of the European Union, we may incur unreasonable additional costs, such as duties, taxes or money transfer fees (transfer or foreign exchange fees charged by the banks), which you must bear.
5.4 You must also bear the costs arising from money transfers in cases in which the delivery is made to an EU Member State, but the payment is initiated outside of the European Union.
5.5 The payment methods that are available to you are shown by clicking the appropriate button on our website or are disclosed in the respective quote.
5.6 Unless otherwise specified for the respective payment methods, the payment claims arising from the contract that has been concluded become payable immediately.
- Delivery conditions
6.1 The delivery conditions, delivery date and existing supply restrictions, if applicable, can be found by clicking the appropriate button on our website or in the respective quote.
Unless a different period is specified in the item description or our delivery conditions, the goods are delivered within 3-5 days after the conclusion of the contract (in case an advance payment has been agreed upon, after the payment authorisation).
6.2 If you are a consumer, the following is statutorily regulated: The risk of the sold item accidentally being destroyed or degraded during shipping only passes over to you when the item in question is delivered, regardless of whether or not the shipping operation is insured. This condition does not apply if you have independently commissioned a transport company that has not been specified by us or a person who has otherwise been appointed to execute the shipping operation.
- Statutory warranty right
Liability for defects is governed by the "Warranty" provisions in our General Terms and Conditions of Business (Part I).
Information on battery disposal
In connection with the sale of batteries or the delivery of devices containing batteries, we are obliged to inform you of the following:
Batteries must not be disposed of with household waste.
You can either return used batteries that we carry or have carried in our range as new batteries to us at your own expense or return them free of charge to our shipping warehouse (shipping address). Alternatively, you can hand in the batteries at your local collection points.
As an end user, you are legally obliged to return used batteries so that they can be recycled or disposed of properly.
Used batteries may contain harmful substances that can damage the environment or your health if not stored or disposed of properly. However, batteries also contain important raw materials such as iron, zinc, manganese or nickel and can be recycled.
The symbols on the batteries have the following meanings:
The symbol of the crossed-out wheelie bin means that the battery must not be disposed of with household waste.
For batteries containing a certain amount of lead, cadmium or mercury, the following additions below the symbol with the crossed-out wheelie bin indicate the respective pollutants:
Pb = Battery contains more than 0.004% lead by weight
Cd = Battery contains more than 0.002% cadmium by weight
Hg = Battery contains more than 0.0005% mercury by weight
Information on the costs involved in accordance with Article 56 (4) of the EU Battery Regulation (Regulation 2023/1542) can be found at the ‘Batterie-Zurück (https://www.batterie-zurueck.de/de/bewirtschaftungvonaltbatterien/)' initiative.
Please pay attention to the above instructions.