Improving the Performance of Solar Stills Using Nanofluids

A. E. Kabeel

ISBN 10: 3659875880 / ISBN 13: 9783659875885

Published by LAP LAMBERT Academic Publishing, 2016

About this Item

nach der Bestellung gedruckt Neuware - Printed after ordering - In this present book, the experimental attempts are made to enhance the solar still productivity by using different types of nano-materials with different weight fraction concentration and also by providing vacuum with integrating the still basin with an external condenser. The used nano-fluids are the suspended nano-sized solid particles of cuprous oxide and aluminum oxide in water. So, the effect of using nano-materials with different weight fraction concentrations from 0.02% to 0.2% in the base fluid was investigated. The function of integrating an external condenser to the modified basin still is to decrease the heat loss by convection from water to glass as the condenser acts as an additional and effective heat and mass sink. So, the effects of adding the external condenser to the modified still and providing vacuum inside it by operating the vacuum fan at different speeds from 90 rpm to 1350 rpm were also investigated. A fair agreement had been achieved between the experimental and theoretical results.

Seller Inventory # 9783659875885

Bibliographic Details

• Title: Improving the Performance of Solar Stills Using Nanofluids
• Publisher: LAP LAMBERT Academic Publishing
• Publication Date: 2016
• Language: English
• ISBN 10: 3659875880
• ISBN 13: 9783659875885
• Binding: Taschenbuch
• Condition: Neu
• Dimensions: 220W x 150H x 8D millimeters 220 millimeters width by 150 millimeters height by 8 millimeters depth
• Weight: 191 grams

About this title

Synopsis

In this present book, the experimental attempts are made to enhance the solar still productivity by using different types of nano-materials with different weight fraction concentration and also by providing vacuum with integrating the still basin with an external condenser. The used nano-fluids are the suspended nano-sized solid particles of cuprous oxide and aluminum oxide in water. So, the effect of using nano-materials with different weight fraction concentrations from 0.02% to 0.2% in the base fluid was investigated. The function of integrating an external condenser to the modified basin still is to decrease the heat loss by convection from water to glass as the condenser acts as an additional and effective heat and mass sink. So, the effects of adding the external condenser to the modified still and providing vacuum inside it by operating the vacuum fan at different speeds from 90 rpm to 1350 rpm were also investigated. A fair agreement had been achieved between the experimental and theoretical results.

About the Author

Fadl Essa was born in Egypt. He graduated his Master in Power Mechanical Engineering, Tanta University, Egypt on 2014. In 2013, he successfully completed the program “The Efficient Use of Energy Resources” in Moscow, Russia. To date (2016), he is a PhD candidate of Mechatronics, Wuhan University of Technology in China and as a Lecturer in Egypt.