Information System Implementations : Using a Leadership Quality Matrix for Success: System Implementations, Gain Significant Momentum, an Insiders Guid
Language: English
Published by Authorhouse, 2012
- Softcover
- New

Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
AbeBooks seller since August 14, 2006
Condition: New
US$ 34.22
Quantity: 1 available
Add to basketItem description from seller
nach der Bestellung gedruckt Neuware - Printed after ordering.
Seller Inventory # 9781468541151
- Title
- Information System Implementations : Using a Leadership Quality Matrix for Success: System Implementations, Gain Significant Momentum, an Insiders Guid
- Author
- Andries J. Jacobs
- Publisher
- Authorhouse
- Publication year
- 2012
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 1468541153
- ISBN 13
- 9781468541151
- Item weight
- 187 grams
- Dimensions
- 229x152x7 mm
by Andries J Jacobs
"Synopsis" may belong to another edition of this title.
Excerpt. © Reprinted by permission. All rights reserved.
Information System Implementations: Using a Leadership Quality Matrix for Success
System Implementations, Gain Significant Momentum, An Insiders Guide to What you need to knowBy Andries J JacobsAuthorHouse
Copyright © 2012 Andries J JacobsAll right reserved.
ISBN: 978-1-4685-4115-1
Contents
Preface.....................................................................ixAcknowledgments.............................................................xiiiIntroduction................................................................xvChapter One Background to the Leadership Quality Matrix.....................3Chapter Two Stakeholders....................................................13Chapter Three Implementation Process........................................24Chapter Four Project Management.............................................33Chapter Five Process Standardization........................................41Chapter Six Project Transition..............................................47Chapter Seven Benefit Realization...........................................54Chapter Eight Troubleshooting...............................................60Chapter Nine Selection of Diagnostic Instruments............................69Conclusion..................................................................85Appendix A: A Step-by-Step Approach.........................................87Appendix B: Leadership Quality Matrix.......................................89Appendix C: Diagnostic Instruments..........................................95References..................................................................97Recommended Reading.........................................................99Index.......................................................................101About the Author............................................................103
Chapter One
Background to the Leadership Quality MatrixIn this chapter, I'll offer you a synopsis of the five most challenging system implementations in which I have participated to provide an understanding of not only my system-implementation experience and the challenges my various teams and I had to deal with, but also my insights into the system-implementation environments that have molded the modified leader in me and contributed to the development of the leadership quality matrix.
From a Modified Leader's Pen
Project 1. In May 1996, as director of marketing administration, I had just researched and developed for the fertilizer industry in South Africa a price-decision, support-system, functional-user specification, and was then assigned the task of client system-implementation lead for the northern region to lead a SAP R/3 version 4.0 h system implementation. The team delivered the SAP R/3 version 4.0 h implementation slightly outside the budget of US$3 million and the scheduled implementation period of twelve months. The configuration and implementation effort included the FI/CO (finance and corporate controlling), SD/MM (sales and materials management), PP (production planning), AM (asset management), and HR (human resources) modules. The infrastructure-technology platform, which at the time was leading-edge, consisted of HP hardware, Oracle database, and Unix operating system. The technical team implemented a three-tier development landscape.
The primary goal was to migrate from a corporate business system developed in-house—including finance, costing, and sales—to an integrated, process-driven enterprise resource planning (ERP) system. The results were remarkable: we reduced onetime plant-maintenance inventory by 30 percent, stock levels on a month-by-month basis by 15 percent, distribution costs by 10 percent, customer complaints by 2 percent, and administration cost by 1 percent.
As Winston Churchill once said, "I was strengthened by the critics' comments." Throughout the implementation, there was no lack of criticism, which in the end contributed to the molding of the modified leader in me and the understanding that leadership is a team effort rather than a management-only issue.
The team experienced a wide range of challenges related to people, process, and technology, including:
• Building an information-technology (IT) and systems team using the regional talent pool
• Dealing with poor IT infrastructure between regional headquarters and distribution and sales offices
• Transforming from a mainframe to a client-server environment
• Working with management's ability to design software for solution-supported business processes
• Getting regional alignment within the broader organization
• Developing processes and procedures that fit the real-time client-server environment
• Getting employees computer-literate enough to be trained in the new transaction-based client-server environment
• Motivating employees to execute transactions according to the flow and order of the business process
• Operating the business as an integrated unit (production, sales, procurement, maintenance, and finance)
• Restructuring administrative departments
• Avoiding putting the business at risk
• Getting system-output acceptance
Project 2. In August 2001, as information-system consultant and part of a high-performance management team, I performed a forward-looking assessment for the largest city in Canada of the value-for-money of the Information System Implementations: Using a Leadership Quality Matrix for Success process-control-system and IT components of the program-integration and coordination-services contract. When a carpool friend and colleague wassuddenlysidelinedbyamedicalcondition,Ialsotooktheresponsibility to lead the Lawson Enterprise Resource Planning conference-room pilot project.
I led the team with a focus on implementing a resource-related software solution, including the design of the selection criteria, software selection process, vendor qualification, and project recommendation and approval processes. The outcome was the rejection of the proposed system and selection of SAP R/3 version 4.6 d as the preferred ERP business system.
The centralized resource-related SAP R/3 implementation was for a global engineering-services company with forty-seven offices on all major continents around the world. Major offices were located in Australia, South Africa, the United Kingdom, Canada, the United States, and Chile. The team had an outstanding performance and implemented, within eight months, the FI/CO, SD/MM, PS (project systems), HR, ITS (Internet transaction services), and employee self-service modules. A company strategic direction drove the infrastructure-technology platform, consisting of Microsoft operating system, Compaq hardware, and SQL database. As a team, we developed, implemented, and managed the global operational-support infrastructure, including the help-desk environment. The support team implemented and managed the global training-program and learning-material-development environments. The support team consisted of sixty people, delivering training to three thousand employees globally.
The main focus of the project was to amalgamate three legacy systems (SAP R/3 version 2.2, Oracle, and SUN) and three different company business processes into a single SAP R/3 version 4.6 d system. The US$10 million implementation effort reduced time spent on reconciling and management of time sheets among various countries by 50 percent, invoice time out to customers in Australia from five to three working days, effort of reconciling intercompany accounts by 50 percent, and time spent on data transfer between various systems by 75 percent.
The system implementation challenged the team leadership's capability mainly in terms of environment, people, process, and to a lesser extent technical issues. The key factors derived from this implementation vastly contributed to the understanding of the importance and management of leadership qualities of all team members in reaching successful implementation completion. The team leadership skills and qualities were challenged by:
• The big-bang rollout approach
• The project being managed by me as a company employee, supported by a vendor-assigned system-implementation manager
• The incorporation of three different companies and three different systems into a single centralized system
• A management style and diverse business requirements that resulted in conflicting system requirements
• Differing backgrounds of project-team members from the United States, South Africa, and Australia
• The team's makeup of seven independent consultants, seven internal consultants, and seven business experts
• Business requirements, training, and rollout stretching across multiple time zones, religions, cultures, legislation, and languages
Project 3. In August 2003, as SAP technology manager, I led a team of SAP R/3 professionals supporting global engineering services of SAP R/3 systems in six countries and forty-seven offices around the world. Through leadership-quality development, the team improved the overall end-user satisfaction and system acceptance, reducing end-user complaints and response times by 40 percent. As I was spearheading the SAP R/3 project systems enhancement and improvement initiative, a good friend and IT colleague reached out and challenged my leadership qualities with a request to accept an assignment on an engineering, procurement, and construction management (EPCM) project for a leading aluminum client in Russia. The focus of the assignment was to implement, support, and maintain for three project offices around the country a state-of-the-art local-area network (LAN), office automation, and integrated-project-delivery software suite.
The US $15 million investment effort covered a LAN consisting of twenty servers and 340 end users. The server environment included a Web front end for access to database and applications, external portal to allow vendors access to project documentation, database, active directory, e-mail, application for project-delivery software suite, and documentation filing. The infrastructure technology platform consisted of HP and Dell hardware, SQL database, Windows 2000 operating system, and Windows NT networks. Information System Implementations: Using a Leadership Quality Matrix for Success
The four-month effort was about the implementation of a project-delivery suite of applications that included SAP R/3 version 4.6 c (time capturing and reporting), custom-developed cost control and progress management system, Primavera P3 (scheduling), document management system (OpenText LiveLink v9.0—document control and management), BMS's safety information management system, and Win Estimator (estimating). The support and maintenance team developed and implemented configuration, change-request, authorization, and disaster-recovery procedures. We also implemented and managed a support desk that enabled improved services, increased accuracy, increased availability of information, better management control, and improved management decision making.
When I stepped onto the international playing field, the importance of applying people-leadership qualities to following and maintaining agreed-upon business processes as a critical factor for system-implementation success dramatically impacted and molded the modified leader in me. The international business arena and the difficulty of mastering the local language put a new spin on team challenges, which included:
• IT and systems budget under client control
• No participation by implementation team in the budget-estimation effort
• IT infrastructure and accompanying administration team belonging to the client
• Part-time functional and technical support teams outside of project control
• Software systems not developed and tested to run in a client-infrastructure environment or support multiple joint-venture partner requirements
• Client requirements for process, function, and reporting not consistent with software design
• No business practices or supporting procedures agreed on before implementation and rollout
• EPCM management changes
• Difference in management style between locals and foreigners
• Failure by foreign management to fully understand the local legal requirements
Project 4. In June 2005, after a challenging fourteen months in Russia, I returned home to spend more time with family and took on the role of core-systems development lead, providing leadership and direction to the software development team and collaborating with the product-support team within the company to ensure that the required functionality and modifications were included in appropriate releases. In conjunction with product managers for the software vendor, we evaluated new technologies and products to determine the feasibility and desirability of incorporating their capabilities within the company core-system components.
Increased activity in the aluminum industry around the world raised the demand for system-implementation leadership skills, leading to me accepting the role of scoping, planning, and managing the implementation, support, and maintenance of a state-of-the-art integrated project-delivery software suite on an EPCM project for a leading aluminum client in Brazil.
The systems environment encompassed two locations, seven hundred end users, and twenty servers. The four-month, US$21 million system-implementation effort covered the implementation of a project-delivery software suite that included MARIAN (procurement, logistics, and materials management), SAPR/3Projects (time management, project-breakdown structure, and invoicing), custom-developed engineering progress management system, custom-developed cost control system, document management system (OpenText—document control and management), and Primavera P5 (project scheduling). As part of the integration effort, the task also included the preparation, planning, and management of the implementation, support, and maintenance of a BizTalk integration platform, transferring data among four project delivery systems: MARIAN, iPAS, APMS (client system), and EBS-Oracle finance (client system). This time around, the new buzzword and technology introduced to the project was the implementation of a Web-based voice-and-video-over-IP communication platform called AliceStreet Conference Center.
Coming off the Russia project and going on to a second international assignment brought me to a strong realization that in non-first-world countries, the perception and belief exists that control is a proof of leadership and is required above all to bring project success. With a couple of minor exceptions, it seemed as if the international project-driven system implementations had very much the same challenges:
• IT and systems budget under client control
• No participation by implementation team in the budget-estimation effort
• IT infrastructure and accompanying administration team belonging to the client
• Part-time functional and technical support teams outside of project control
• Software systems not developed and tested to run in a client-infrastructure environment or support multiple joint-venture partner requirements
• Client requirements for process, function, and reporting not consistent with software design
• No business practices or supporting procedures agreed on before implementation and rollout
• EPCM management changes
• Difference in management style between locals and foreigners
• Failure by foreign management to fully understand the local legal requirements
Project 5. In August 2008, with my major international project assignments behind me, it was time to focus on and reconcile with my family. My relationship with my wife, Anna was increasingly strained, and my two wonderful daughters were grown up and on their way to university. It was time for me to keep my family together. In doing so, I had to change direction, travel less, and bring us all together in Vancouver.
While providing system-implementation management services to a molybdenum-mining client in British Columbia and a gold-mining client in Nunavut, Canada, I was asked by the Vancouver office management—because of my experience in EPCM project-delivery systems, understanding of project-delivery business function, and ability to lead diverse teams—to lead the EPCM project-delivery-services team. The team of approximately sixty professionals provided project-delivery services to all the mineral and mining processing and renewable-power projects in the Vancouver office. I provided leadership to specialists in the following areas: project setup, accounting and time management (SAP R/3 version 4.6 c), capital cost estimating (Candy), planning and scheduling (Primavera P6), procurement and materials management (MARIAN), project cost control (custom-developed application), engineering progress (custom-developed application), and document management and control (OpenText LiveLink version 9.0). Special assigned tasks included optimization of business processes, procedures, computerized tools-that-work, and team and business-functions productivity.
After two major international assignments, I had hoped for a smooth ride and was pleasantly surprised by the variety and large number of challenges that the team faced in implementing and using the various project-delivery systems. The project-delivery-services team's leadership skills and qualities were challenged by:
• Project-delivery systems that were mainly developed for the mineral and mining processing industry and not for the renewable power industry
• Renewable power projects that were small in dollar value, stretching over a large time duration
• Conflicting reporting requirements between project managers and business management
• The perception of project managers that the corporate systems were designed for large EPCM projects
(Continues...)
Excerpted from Information System Implementations: Using a Leadership Quality Matrix for Successby Andries J Jacobs Copyright © 2012 by Andries J Jacobs. Excerpted by permission of AuthorHouse. All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 7 to 10 business days | 5 to 7 business days |
|---|---|---|
| First item | US$ 39.06 | US$ 50.22 |
Payment methods
- Bank Wire Transfer
- Check
- Paypal
Store description
Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.
Specialty
Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & StudiumSeller's business information
AHA-BUCH GmbH
Garlebsen 48
Einbeck, Germany 37574
Terms of sale
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes a legal transaction for purposes that can predominantly be attributed neither to their commercial nor their independent professional activity. An entrepreneur is any natural or legal person or a partnership with legal capacity who, when concluding a legal transaction, acts in the exercise of his independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The object of the contract is the sale of goods.
(2) If an article is listed by us at AbeBooks or ZVAB, the activation of the offer page at AbeBooks or ZVAB constitutes the binding offer to conclude a contract under the conditions contained in the article page.
(3) The contract is concluded via the online shopping cart system as follows:
The goods intended for purchase are stored in the "shopping cart". Via the corresponding button in the navigation bar you can call up the "shopping cart" and make changes there at any time.
After calling up the "Checkout" page and entering the personal data as well as the payment and shipping conditions, all order data will be displayed again on the order overview page.
Before sending the order, you have the option of checking all information again, changing it (also via the "back" function of the Internet browser) or cancelling the purchase.
By submitting the order via the "Buy now" button, you declare the acceptance of the offer in a legally binding manner, whereby the contract is concluded.
(4) The processing of the order and transmission of all information required in connection with the conclusion of the contract is partly automated by e-mail. You must therefore ensure that the e-mail address you have stored with us is correct, that the receipt of the e-mails is technically ensured and, in particular, that spam filters do not prevent it.
§ 3 Right of retention, retention of title
(1) You can only exercise a right of retention if it concerns claims from the same contractual relationship.
(2) The goods remain our property until full payment of the purchase price.
§ 4 Warranty
(1) The statutory warranty rights exist.
(2) In the case of used goods, the warranty period is one year from delivery of the item, deviating from the statutory regulation. The shortening of the deadline does not apply:
- culpably caused damages attributable to us from injury to life, limb or health and in the case of other damages caused intentionally or through gross negligence;
- insofar as we have fraudulently concealed the defect or have assumed a guarantee for the quality of the item.
(3) As a consumer, you are requested to check the item immediately upon delivery for completeness, obvious defects and transport damage and to inform us and the freight forwarder of any complaints as soon as possible. If you do not comply with this, this will have no effect on your statutory warranty claims.
§ 5 Choice of law, place of performance, place of jurisdiction
(1) German law shall apply. In the case of consumers, this choice of law shall only apply insofar as this does not withdraw the protection afforded by mandatory provisions of the law of the state of the consumer's habitual residence (principle of favourability).
(2) The place of performance for all services arising from the existing business relationships with us as well as the place of jurisdiction is our registered office, insofar as you are not a consumer, but a merchant, a legal entity under public law or a special fund under public law. The same applies if you do not have a general place of jurisdiction in Germany or the EU or if the domicile or habitual residence is not known at the time the action is brought. The right to appeal to the court at another statutory place of jurisdiction remains unaffected by this.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods shall expressly not apply.
II. Customer Information
- Identity of the Seller
AHA-BUCH GmbH
Garlebsen 48
D-37574 Einbeck
Germany
Telephone: 055639996039
E-mail: abebooks@aha-buch.de.
Alternative dispute resolution:
The European Commission provides a platform for out-of-court online dispute resolution (ODR platform), which can be accessed under https://ec.europa.eu/odr.
- Information on the conclusion of the contract
The technical steps for the conclusion of the contract, the conclusion of the contract itself and the correction options are carried out in accordance with the provisions "Conclusion of the contract" of our General Terms and Conditions (Part I.).
- Contract language, contract text storage
3.1. The contract language is german.
3.2. The complete text of the contract will not be stored by us. Before sending the order, the contract data can be printed out or electronically saved via the print function of the browser. After receipt of the order by us, the order data, the legally prescribed information for distance contracts and the General Terms and Conditions will be sent to you again by e-mail.
- Essential characteristics of the goods or services
The essential characteristics of the goods and/or services can be found in the respective offer.
- Prices and terms of payment
5.1. The prices stated in the respective offers as well as the shipping costs represent total prices. They include all price components including all applicable taxes.
5.2. The shipping costs incurred are not included in the purchase price. They can be called up via a correspondingly designated button on our website or in the respective offer, are shown separately in the course of the ordering process and are to be borne by you in addition, unless free shipping has been promised.
5.3. If the delivery is made to countries outside the European Union, we may incur additional costs for which we are not responsible, such as.B customs duties, taxes or money transfer fees (transfer or exchange rate fees of the credit institutions), which are to be borne by you. Any costs incurred for the transfer of money shall also be borne by you in cases where the delivery is made to an EU member state, but the payment was initiated outside the European Union.
5.4. The payment methods available to you are indicated under a corresponding button on our website or in the respective offer.
5.5. Unless otherwise stated for the individual payment methods, the payment claims from the concluded contract are due for payment immediately.
- Terms of delivery
6.1. The terms of delivery, the delivery date and, if applicable, existing delivery restrictions can be found under a correspondingly designated button on our website or in the respective offer.
Insofar as no other deadline is specified in the respective offer or under the correspondingly designated button, the delivery of the goods will take place within 3-5 days after conclusion of the contract (in the case of agreed advance payment, however, only after the time of your payment instruction).
6.2. Insofar as you are a consumer, it is regulated by law that the risk of accidental loss and accidental deterioration of the sold item during dispatch shall only pass to you upon handover of the goods, regardless of whether the shipment is insured or uninsured. This does not apply if you have independently commissioned a transport company not named by the entrepreneur or a person otherwise designated to carry out the shipment.
- Statutory liability for defects
Liability for defects is governed by the "Warranty" provision in our General Terms and Conditions (Part I).
last update: 01/06/2022
Privacy policy
Unless otherwise stated below, the provision of your personal data is neither required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide this will have no consequences. This only applies if no other information is provided in the subsequent processing operations.
Collection, processing and disclosure of personal data when placing orders
When ordering, we collect and process your personal data only to the extent necessary to fulfil and process your order and to process your enquiries. The provision of the data is necessary for the conclusion of the contract. Failure to provide this provision means that no contract can be concluded. The processing takes place on the basis of Art. 6 para. 1 lit.b GDPR and is necessary for the performance of a contract with you.
Your data will be passed on, for example, to the shipping companies and dropshipping providers selected by you, payment service providers, service providers for order processing and IT service providers.
In all cases, we strictly observe the legal requirements. The scope of data transmission is limited to a minimum.
Duration of storage
After completion of the contract, the data will first be stored for the duration of the warranty period, then taking into account legal, in particular tax and commercial retention periods and then deleted after expiry of the period, unless you have consented to further processing and use.
Rights of the data subject
If the legal requirements are met, you have the following rights under Articles 15 to 20 GDPR: Right to information, to correction, to erasure, to restriction of processing, to data portability.
In addition, pursuant to Article 21 (1) GDPR, you have the right to object to processing based on Article 6 (1) f GDPR and to processing for direct marketing purposes.
Contact us on request. The contact details can be found in our imprint.
Right to lodge a complaint with the supervisory authority
In accordance with Article 77 GDPR, you have the right to complain to the supervisory authority if you believe that the processing of your personal data is not lawful.
Right to object
If the personal data processing listed here is based on our legitimate interest pursuant to Art. 6 para. 1 lit. f GDPR, you have the right to object to this processing at any time with effect for the future for reasons arising from your particular situation.
Shipping terms
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.