Isolation of Shock Vibration Through Switchable Stiffness: Mathematical modeling and experimental validation of semi active stiffness strategies for shock vibration reduction

Mechanical vibration is normally an undesired condition which can cause problems such as discomfort, noise, fatigue, etc. Shock is a particular type of vibration of transient nature containing high levels of energy in a very short period of time It is vital for engineers to understand and apply vibration control methods, either by introducing structural modifications, reducing the source of vibration, or interposing an isolator between receiver and source. The easiest mathematical representation of these isolators is a passive combination of a spring and a damping of fixed properties. There are some isolators where the properties can change depending upon the vibration source called semi active, or adaptive vibration isolators. This book explores the application of a novel stiffness switching strategy to achieve an improved shock isolator. This is a two stage strategy controlling the vibration response during the shock and the later residual vibration. The book presents a review of the state of the art in shock isolation, theoretical models for switching stiffness and experimental validation.

Graduated from Mechanical and Electrical Engineering in 2003 from Universidad Autonoma de Nuevo Leon (UANL), Mexico, later obtained a PhD from the Institute of Sound and Vibration Research, University of Southampton. He is an academic and researcher at UANL, México in structural dynamics, working on passive shock isolation and modal analysis.