Local loads in plates and shells

S. Lukasiewicz

ISBN 10: 9400995431 / ISBN 13: 9789400995437

Published by Springer Netherlands, Springer Dez 2011, 2011

About this Item

This item is printed on demand - Print on Demand Titel. Neuware -Thin walled structures so extensively used nowadays in industry and civil engineering are usually loaded by very complex systems of forces acting on their edges or over their surfaces. In calculating the strength of a structure we replace real loads by certain idealized loads distinguishing between typical surface loads distributed over a great area of the structure and loads acting over a small area. The latter are called concentrated loads. When the area under the load is very small in comparison with the dimensions of the surface of the structure, for example, when the diameter of the loaded area is smaller than the wall thickness, the load can be considered as a single force or a mo ment acting on the structure at one point only. The real loads which are met in practice can always be replaced by a combination of components such as forces normal and tangential to the wall as well as bending and twisting moments. Knowing the distribution of the stresses in the structure produced by each component, we can find it under any arbitrary load using the principle of superposition. There are two main reasons for the appearance of the concentration of stresses in the structure. It can be produced by notches, rapid changes of the cross-section, holes, cutouts, etc. on one hand and by concentrated loads resulting from the interaction of the elements of the structure on the other.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 588 pp. Englisch.

Seller Inventory # 9789400995437

Bibliographic Details

• Title: Local loads in plates and shells
• Publisher: Springer Netherlands, Springer Dez 2011
• Publication Date: 2011
• Language: English
• ISBN 10: 9400995431
• ISBN 13: 9789400995437
• Binding: Taschenbuch
• Condition: Neu
• Dimensions: 229W x 152H x 32D millimeters 229 millimeters width by 152 millimeters height by 32 millimeters depth
• Weight: 840 grams

About this title

Synopsis

Thin walled structures so extensively used nowadays in industry and civil engineering are usually loaded by very complex systems of forces acting on their edges or over their surfaces. In calculating the strength of a structure we replace real loads by certain idealized loads distinguishing between typical surface loads distributed over a great area of the structure and loads acting over a small area. The latter are called concentrated loads. When the area under the load is very small in comparison with the dimensions of the surface of the structure, for example, when the diameter of the loaded area is smaller than the wall thickness, the load can be considered as a single force or a mo­ ment acting on the structure at one point only. The real loads which are met in practice can always be replaced by a combination of components such as forces normal and tangential to the wall as well as bending and twisting moments. Knowing the distribution of the stresses in the structure produced by each component, we can find it under any arbitrary load using the principle of superposition. There are two main reasons for the appearance of the concentration of stresses in the structure. It can be produced by notches, rapid changes of the cross-section, holes, cutouts, etc. on one hand and by concentrated loads resulting from the interaction of the elements of the structure on the other.

Language Notes

Text: English, Polish (translation)