MONITORING AND CONTROLLING OF SUBSTATION USING ZIGBEE TECHNOLOGY

Satheesh Gundlapalli

ISBN 10: 6208414865 / ISBN 13: 9786208414863

Published by LAP LAMBERT Academic Publishing, 2024

About this Item

nach der Bestellung gedruckt Neuware - Printed after ordering - This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit.

Seller Inventory # 9786208414863

Bibliographic Details

• Title: MONITORING AND CONTROLLING OF SUBSTATION USING ZIGBEE TECHNOLOGY
• Publisher: LAP LAMBERT Academic Publishing
• Publication Date: 2024
• Language: English
• ISBN 10: 6208414865
• ISBN 13: 9786208414863
• Binding: Taschenbuch
• Condition: Neu
• Dimensions: 220W x 150H x 5D millimeters 220 millimeters width by 150 millimeters height by 5 millimeters depth
• Weight: 137 grams

About this title

Synopsis

This book proposes an innovative design to develop a system to monitor and control various electrical loads from the substation. The design generally consists of two units, one in the substation unit called transmitter unit, and another one is the Main station called as controlling or receiving unit. The transmitter unit is where the power is monitored continuously by Arduino microcontroller. Zigbee is used for transmitting the signals that are obtained. The controlling unit or receiver unit in the main station receives the transmitted signals by means of the zigbee receiver and displays in the laptop and reacts in accordance to the received signal. The ultimate objective is to monitor the electrical parameters continuously and hence to guard the burning of the equipments in the station due to the constraints such as overload, over temperature and input high voltages. If any of these values increases beyond the limit then the entire unit is shut down by the designed controlling unit.