Machine Learning Support for Fault Diagnosis of System-on-Chip
Language: English
Published by Springer Mär 2024, 2024
- Softcover
- New
Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
AbeBooks seller since August 14, 2006
Condition: New
US$ 85.46
Quantity: 1 available
Add to basketItem description from seller
Neuware - This book provides a state-of-the-art guide to Machine Learning (ML)-based techniques that have been shown to be highly efficient for diagnosis of failures in electronic circuits and systems. The methods discussed can be used for volume diagnosis after manufacturing or for diagnosis of customer returns. Readers will be enabled to deal with huge amount of insightful test data that cannot be exploited otherwise in an efficient, timely manner. After some background on fault diagnosis and machine learning, the authors explain and apply optimized techniques from the ML domain to solve the fault diagnosis problem in the realm of electronic system design and manufacturing. These techniques can be used for failure isolation in logic or analog circuits, board-level fault diagnosis, or even wafer-level failure cluster identification. Evaluation metrics as well as industrial case studies are used to emphasize the usefulness and benefits of using ML-based diagnosis techniques.
Seller Inventory # 9783031196416
- Title
- Machine Learning Support for Fault Diagnosis of System-on-Chip
- Author
- Li-C. Wang
- Publisher
- Springer Mär 2024
- Publication year
- 2024
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 3031196414
- ISBN 13
- 9783031196416
- Item weight
- 499 grams
- Dimensions
- 235x155x18 mm
This book provides a state-of-the-art guide to Machine Learning (ML)-based techniques that have been shown to be highly efficient for diagnosis of failures in electronic circuits and systems. The methods discussed can be used for volume diagnosis after manufacturing or for diagnosis of customer returns. Readers will be enabled to deal with huge amount of insightful test data that cannot be exploited otherwise in an efficient, timely manner. After some background on fault diagnosis and machine learning, the authors explain and apply optimized techniques from the ML domain to solve the fault diagnosis problem in the realm of electronic system design and manufacturing. These techniques can be used for failure isolation in logic or analog circuits, board-level fault diagnosis, or even wafer-level failure cluster identification. Evaluation metrics as well as industrial case studies are used to emphasize the usefulness and benefits of using ML-based diagnosis techniques.
"Synopsis" may belong to another edition of this title.
About the Author
Patrick GIRARD received a M.Sc. degree in Electrical Engineering and a Ph.D. degree in Microelectronics from the University of Montpellier, France, in 1988 and 1992 respectively. He also received the “Habilitation à Diriger des Recherches” degree from the University of Montpellier, France, in 2003. He is currently Research Director at CNRS (French National Center for Scientific Research) and works in the Microelectronics Department of the Laboratory of Informatics, Robotics and Microelectronics of Montpellier (LIRMM) - France.
Patrick Girard is Coordinator of the International Research Project « INSIMIA » (French-Italian Research Program on the Integrity of Integrated Systems in the Era of Artificial Intelligence) created in 2021 by the CNRS and the University of Montpellier, France, with the Politecnico di Torino, Italy. Since 2006, he is deputy director of the French scientific network dedicated to research in the fields of System-on-Chip, Embedded Systems and Connected Objects(SOC2), a network composed of 1400 researchers. From 2010 to 2014, he was Director of the Microelectronics Department at LIRMM, at that time composed of about 100 people. His research interests include all aspects of digital and memory circuit test and reliability, with emphasis on critical constraints such as timing and power. Robust design of neuromorphic circuits, test of approximate circuits, as well as machine learning for fault diagnosis are also part of his new research activities. Patrick Girard is Technical Activities Chair of the Test Technology Technical Council (TTTC) of the IEEE Computer Society. From 2006 to 2010, he was Vice-Chair of the European TTTC (ETTTC) of the IEEE Computer Society. He has served on numerous conference committees including ACM/IEEE Design Automation Conference (DAC), ACM/IEEE Design Automation and Test in Europe (DATE), IEEE International Test Conference (ITC), IEEE VLSI Test Symposium (VTS), IEEE European Test Symposium (ETS), IEEE Asian Test Symposium (ATS), IEEE Computer Society Annual Symposium on VLSI (ISVLSI), and IEEE International NEWCAS Conference.Patrick Girard was the founder and Editor-in-Chief of the ASP Journal of Low Power Electronics (JOLPE). He is an Associate Editor of the IEEE Transactions on Emerging Topics in Computing, the IEEE Transactions on Circuits and Systems I: Regular Papers, the IEEE Transactions on Circuits and Systems II: Express Briefs, and the Journal of Electronic Testing (JETTA - Springer). He was formerly an Associate Editor of the IEEE Transactions on VLSI Systems, IEEE Transactions on Computers, and IEEE Transactions on Computer-Aided Design of Circuits and Systems.
Patrick Girard has been involved in several (34) European research projects (ESPRIT III ATSEC, EUREKA MEDEA, MEDEA+ ASSOCIATE, IST MARLOW, MEDEA+ NanoTEST, CATRENE TOETS, ENIAC ELESIS, CATRENE MASTER_3D, PENTA HADES), national research projects (ANR, FUI), and industrial research projects with major companies like Infineon Technologies, Intel, Atmel, ST-Ericsson, STMicroelectronics, etc.
Patrick Girard has supervised 44 PhD dissertations, and has published 12 books or book chapters, 90 journal papers, and more than 250 conference and symposium papers. He is co-author of 5 patents. He is a Fellow of the IEEE and a Golden Core Member of the IEEE Computer Society.
Shawn Blanton is Joseph F. and Nancy Keithley Professor of Electrical and Computer Engineering at Carnegie Mellon University. In 1995 he received his Ph.D. in Electrical Engineering and Computer Science from the University of Michigan, Ann Arbor. His personal research interests include various aspects of integrated system testing and diagnosis, and the development of design methodologiesand tools for securing hardware systems. He has consulted for various companies, and is the founder of TestWorks, a Carnegie Mellon University spinout focused on information extraction from IC test data. He received a Career Award from the National Science Foundation in 1997, and IBM Faculty Partnership Awards in 2005 and 2006. He has given over 100 invited talks at universities and companies and is the recipient of several best-paper awards. He has published nearly 200 refereed conference and journal papers and has 10 U.S. patents or patent applications filed. He has served on various technical program committees and chaired the 2011 program for the International Test Conference. Dr. Blanton is a fellow of the IEEE and senior member of the ACM.
Dr. Blanton has served as the Interim Vice Provost for Diversity, Equity, and Inclusion for Carnegie Mellon University 2020-21. In this interim role, he focused on diversifyingthe graduate student and faculty populations across the university, along with enhancing and initiating win-win relationships with the Pittsburgh region. He also served as the Acting Associate Dean for Diversity and Inclusion for the College of Engineering from 2019 to 2020. In this role, he was responsible for developing and executing a DEI strategic plan for the college. Dr. Blanton currently serves as the Associate Head of Research and is responsible for developing and executing department research strategies.
Blanton is also significantly involved in the recruitment of underrepresented candidates for graduate school. Most of his activities center on direct recruitment at the annual conventions of various engineering societies that include the National Society of Black Engineers (NSBE), Society of Hispanic Professional Engineers and the American Indian Science and Engineering Society, and he spearheaded the University's efforts for the 2006, 2012 and 2018 NSBE conventions in Pittsburgh. In 2006, Blanton was awarded an Emerald Award for outstanding leadership in recruiting and mentoring minorities for advanced degrees in science and technology, and in 2021 he was awarded the Lifetime Achievement award from the National Society of Black Engineers for exhibiting career technical excellence and leadership in higher education in a career spanning several years.
Li-C. Wang is a professor of the Electrical and Computer Engineering Department at University of California, Santa Barbara (UCSB), USA. He received his PhD in 1996 from the University of Texas at Austin, and was previously with Motorola PowerPC Design Center. He joined UCSB in 2000. In the last two decades, his research focused on investigating how machine learning could be applied in electronic design and test flows. Earlier, his research focused on a variety of topics in Electronic Design Automation and Test, including microprocessor test and verification, statistical timing analysis, defect-oriented testing, and Boolean Satisfiability (SAT) solvers. He received 9 best paper awards and 2 honorable mentioned paper awards from major conferences, including the best paper award from International Test Conference (ITC) 2020 and from VLSI Test Symposium 2016. He is the recipient of the 2010 Technical Excellence Award from Semiconductor Research Corporation (SRC) for his research contributions in data mining for test and validation. He is the recipient of the 2017 TTTC Bob Madge Innovation Award. He is an IEEE fellow. He served as the Program Chair for ITC 2016, and as the General Chair for ITC 2017 and ITC 2018. He helped found the ITC-Asia conference in 2017.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 7 to 10 business days | 5 to 7 business days |
|---|---|---|
| First item | US$ 39.06 | US$ 50.22 |
Payment methods
- Bank Wire Transfer
- Check
- Paypal
Store description
Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.
Specialty
Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & StudiumSeller's business information
AHA-BUCH GmbH
Garlebsen 48
Einbeck, Germany 37574
Terms of sale
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes a legal transaction for purposes that can predominantly be attributed neither to their commercial nor their independent professional activity. An entrepreneur is any natural or legal person or a partnership with legal capacity who, when concluding a legal transaction, acts in the exercise of his independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The object of the contract is the sale of goods.
(2) If an article is listed by us at AbeBooks or ZVAB, the activation of the offer page at AbeBooks or ZVAB constitutes the binding offer to conclude a contract under the conditions contained in the article page.
(3) The contract is concluded via the online shopping cart system as follows:
The goods intended for purchase are stored in the "shopping cart". Via the corresponding button in the navigation bar you can call up the "shopping cart" and make changes there at any time.
After calling up the "Checkout" page and entering the personal data as well as the payment and shipping conditions, all order data will be displayed again on the order overview page.
Before sending the order, you have the option of checking all information again, changing it (also via the "back" function of the Internet browser) or cancelling the purchase.
By submitting the order via the "Buy now" button, you declare the acceptance of the offer in a legally binding manner, whereby the contract is concluded.
(4) The processing of the order and transmission of all information required in connection with the conclusion of the contract is partly automated by e-mail. You must therefore ensure that the e-mail address you have stored with us is correct, that the receipt of the e-mails is technically ensured and, in particular, that spam filters do not prevent it.
§ 3 Right of retention, retention of title
(1) You can only exercise a right of retention if it concerns claims from the same contractual relationship.
(2) The goods remain our property until full payment of the purchase price.
§ 4 Warranty
(1) The statutory warranty rights exist.
(2) In the case of used goods, the warranty period is one year from delivery of the item, deviating from the statutory regulation. The shortening of the deadline does not apply:
- culpably caused damages attributable to us from injury to life, limb or health and in the case of other damages caused intentionally or through gross negligence;
- insofar as we have fraudulently concealed the defect or have assumed a guarantee for the quality of the item.
(3) As a consumer, you are requested to check the item immediately upon delivery for completeness, obvious defects and transport damage and to inform us and the freight forwarder of any complaints as soon as possible. If you do not comply with this, this will have no effect on your statutory warranty claims.
§ 5 Choice of law, place of performance, place of jurisdiction
(1) German law shall apply. In the case of consumers, this choice of law shall only apply insofar as this does not withdraw the protection afforded by mandatory provisions of the law of the state of the consumer's habitual residence (principle of favourability).
(2) The place of performance for all services arising from the existing business relationships with us as well as the place of jurisdiction is our registered office, insofar as you are not a consumer, but a merchant, a legal entity under public law or a special fund under public law. The same applies if you do not have a general place of jurisdiction in Germany or the EU or if the domicile or habitual residence is not known at the time the action is brought. The right to appeal to the court at another statutory place of jurisdiction remains unaffected by this.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods shall expressly not apply.
II. Customer Information
- Identity of the Seller
AHA-BUCH GmbH
Garlebsen 48
D-37574 Einbeck
Germany
Telephone: 055639996039
E-mail: abebooks@aha-buch.de.
Alternative dispute resolution:
The European Commission provides a platform for out-of-court online dispute resolution (ODR platform), which can be accessed under https://ec.europa.eu/odr.
- Information on the conclusion of the contract
The technical steps for the conclusion of the contract, the conclusion of the contract itself and the correction options are carried out in accordance with the provisions "Conclusion of the contract" of our General Terms and Conditions (Part I.).
- Contract language, contract text storage
3.1. The contract language is german.
3.2. The complete text of the contract will not be stored by us. Before sending the order, the contract data can be printed out or electronically saved via the print function of the browser. After receipt of the order by us, the order data, the legally prescribed information for distance contracts and the General Terms and Conditions will be sent to you again by e-mail.
- Essential characteristics of the goods or services
The essential characteristics of the goods and/or services can be found in the respective offer.
- Prices and terms of payment
5.1. The prices stated in the respective offers as well as the shipping costs represent total prices. They include all price components including all applicable taxes.
5.2. The shipping costs incurred are not included in the purchase price. They can be called up via a correspondingly designated button on our website or in the respective offer, are shown separately in the course of the ordering process and are to be borne by you in addition, unless free shipping has been promised.
5.3. If the delivery is made to countries outside the European Union, we may incur additional costs for which we are not responsible, such as.B customs duties, taxes or money transfer fees (transfer or exchange rate fees of the credit institutions), which are to be borne by you. Any costs incurred for the transfer of money shall also be borne by you in cases where the delivery is made to an EU member state, but the payment was initiated outside the European Union.
5.4. The payment methods available to you are indicated under a corresponding button on our website or in the respective offer.
5.5. Unless otherwise stated for the individual payment methods, the payment claims from the concluded contract are due for payment immediately.
- Terms of delivery
6.1. The terms of delivery, the delivery date and, if applicable, existing delivery restrictions can be found under a correspondingly designated button on our website or in the respective offer.
Insofar as no other deadline is specified in the respective offer or under the correspondingly designated button, the delivery of the goods will take place within 3-5 days after conclusion of the contract (in the case of agreed advance payment, however, only after the time of your payment instruction).
6.2. Insofar as you are a consumer, it is regulated by law that the risk of accidental loss and accidental deterioration of the sold item during dispatch shall only pass to you upon handover of the goods, regardless of whether the shipment is insured or uninsured. This does not apply if you have independently commissioned a transport company not named by the entrepreneur or a person otherwise designated to carry out the shipment.
- Statutory liability for defects
Liability for defects is governed by the "Warranty" provision in our General Terms and Conditions (Part I).
last update: 01/06/2022
Privacy policy
Unless otherwise stated below, the provision of your personal data is neither required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide this will have no consequences. This only applies if no other information is provided in the subsequent processing operations.
Collection, processing and disclosure of personal data when placing orders
When ordering, we collect and process your personal data only to the extent necessary to fulfil and process your order and to process your enquiries. The provision of the data is necessary for the conclusion of the contract. Failure to provide this provision means that no contract can be concluded. The processing takes place on the basis of Art. 6 para. 1 lit.b GDPR and is necessary for the performance of a contract with you.
Your data will be passed on, for example, to the shipping companies and dropshipping providers selected by you, payment service providers, service providers for order processing and IT service providers.
In all cases, we strictly observe the legal requirements. The scope of data transmission is limited to a minimum.
Duration of storage
After completion of the contract, the data will first be stored for the duration of the warranty period, then taking into account legal, in particular tax and commercial retention periods and then deleted after expiry of the period, unless you have consented to further processing and use.
Rights of the data subject
If the legal requirements are met, you have the following rights under Articles 15 to 20 GDPR: Right to information, to correction, to erasure, to restriction of processing, to data portability.
In addition, pursuant to Article 21 (1) GDPR, you have the right to object to processing based on Article 6 (1) f GDPR and to processing for direct marketing purposes.
Contact us on request. The contact details can be found in our imprint.
Right to lodge a complaint with the supervisory authority
In accordance with Article 77 GDPR, you have the right to complain to the supervisory authority if you believe that the processing of your personal data is not lawful.
Right to object
If the personal data processing listed here is based on our legitimate interest pursuant to Art. 6 para. 1 lit. f GDPR, you have the right to object to this processing at any time with effect for the future for reasons arising from your particular situation.
Shipping terms
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.