Shanshan Liu received the Ph.D. degree in Microelectronics and Solid-State Electronics from Harbin Institute of Technology, Harbin, China, in 2018. She was a post-doctoral researcher with the Department of Electrical and Computer Engineering, Northeastern University, Boston, USA, from 2018 to 2021, and an assistant professor with the Klipsch School of Electrical and Computer Engineering, New Mexico State University, Las Cruces, USA from 2021 to 2023. She is currently a professor with the School of Information and Communication Engineering, University of Electronic Science and Technology of China, Chengdu, China.Dr. Liu is an Associate Editor for the IEEE Transactions on Emerging Topics in Computing and the IEEE Transactions on Nanotechnology and serves as a technical program committee member for several IEEE/ACM conferences such as NANO, DFT, GLSVLSI. She is also the 2024-elected Member-at-Large of the IEEE Nanotechnology Council. Her research interests include fault tolerance design in high performance computing systems, emerging computing, VLSI design, dependable machine learning, and error correction codes.

Pedro Reviriego completed the PhD in 1997 and joined the R&D department of Teldat a Spanish company that designs and manufactures routers. Then in 2000, he moved on to an Irish a start-up that was developing Ethernet transceiver ASICs and that later was acquired by an US company (now part of Broadcom). The transceivers developed were licensed to Intel and had a large commercial success. Since 2007 he has been in Academia with positions at Nebrija University, Universidad Carlos III de Madrid and currently Universidad Politécnica de Madrid.Pedro Reviriego has made significant contributions in different areas like Energy Efficiency in Ethernet on which he was a pioneer contributing to the IEEE 802.3 standards and writing seminal papers on the field with more than 470 citations in Google Scholar. This work was recognized with two Google Research Awards. The second topic on which he has worked is the design and implementation of Error Correction Codes (ECCs) to protect memories. In this area, he has pioneered the use of one step majority logic decodable codes for memory protection with a large number of publications. More recently, he focuses on fault-tolerant machine learning, in this area he has proposed fault tolerant implementations for many machine learning algorithms including complex neural networks.Pedro Reviriego is associate editor of IEEE Transactions on Emerging Topics in Computing and has published more than 300 papers on journals indexed on the JCR, most of them in Transactions of the IEEE and more than 5900 citations on Google Scholar. He also holds more than 12 US patents most of them in collaboration with NVIDIA/Mellanox.

Zhen Gao received the BS, MS and PhD degree in Electrical Engineering from Tianjin University, China, in 2005, 2007 and 2011, respectively. He was a visiting scholar in GeorgiaTech during 2008 ~ 2010, and a Postdoc researcher in Tsinghua University during 2011 ~ 2014. He is currently an Associate Professor in Tianjin University. His research interests include circuit reliability, fault tolerance design, wireless communications and blockchain technologies.

Fabrizio Lombardi graduated in 1977 from the University of Essex (UK) with a B.Sc. (Hons.) in Electronic Engineering. In 1977 he joined the Microwave Research Unit at University College London, where he received the Master in Microwaves and Modern Optics (1978), the Diploma in Microwave Engineering (1978) and the Ph. D. from the University of London (1982). He is currently the holder of the International Test Conference (ITC) Endowed Chair at Northeastern University, Boston. Currently, Dr. Lombardi is the 2022-2023 President; of the IEEE Nanotechnology Council (NTC); in 2021 he was 2nd VP of the IEEE Computer Society (CS). He was the VP of Publications of the IEEE CS (2019-2020) and the NTC (2020) as well as also a member of the IEEE Publication Services and Products Board (PSPB) (2019-2023). He has been appointed on Executive Boards of many non-profit organizations (such as Computing-in-the-Core, now code.org the non-partisan advocacy coalition for K-12 Computer Science education) as well as the Computer Society (as an elected two-term member of its Board of Governors (2012-2017)) and the IEEE (as an appointed member of the Future Directions Committee (2014-2017)).In the past Dr. Lombardi has been a two 2-year term Editor-in-Chief (2007-2010), Associate Editor-in-Chief (2000-2006) and Associate Editor (1996-2000) of the IEEE Transactions on Computers, the inaugural two-term Editor-in-Chief of the IEEE Transactions on Emerging Topics in Computing (2013-2017); Editor-in-Chief of the IEEE Transactions on Nanotechnology (2014-2019) as well as member of the Editorial Boards of the ACM Journal of Emerging Technologies in Computing Systems, the IEEE Design & Test Magazine and IEEE Transactions on CAD of ICAS. Dr. Lombardi has been twice a Distinguished Visitor of the IEEE Computer Society (1990-1993 and 2001-2004). He serves as Chair of the Committee on “Nanotechnology Devices and Systems” of the Test Technology Technical Council of the IEEE.Dr. Lombardi is a Fellow of the IEEE for “contributions to testing and fault tolerance of digital systems”. He was the recipient of the 2011 Meritorious Service Award and elevated to Golden Core membership in the same year by the IEEE CS; he was the Chair of the 2016 and 2017 IEEE CS Fellow Evaluation Committee. He has been awarded the 2019 NTC Distinguished Service Award, the 2019 “Spirit of the CS” Award and the 2021 T Michael Elliott Distinguished Service Certificate from the CS. He has received many professional awards: the Visiting Fellowship at the British Columbia Advanced System Institute, University of Victoria, Canada (1988), twice the Texas Experimental Engineering Station Research Fellowship (1991-1992, 1997-1998) the Halliburton Professorship (1995), the Outstanding Engineering Research Award at Northeastern University (2004) and an International Research Award from the Ministry of Science and Education of Japan (1993-1999). Dr. Lombardi was the recipient of the 1985/86 Research Initiation Award from the IEEE/Engineering Foundation and a Silver Quill Award from Motorola-Austin (1996). Together with his students, his manuscripts have been selected for the best paper awards at technical events/meetings such as IEEE DFT and IEEE/ACM Nanoarch. Since inception, he has been always included in the list of World’s Top 2% Scientists, as compiled by Stanford University.Dr. Lombardi has been involved in organizing many international symposia, conferences and workshops sponsored by professional organizations as well as guest editor of Special Issues in archival journals and magazines. His research interests are emerging technologies (mostly nanoscale circuits and magnetic devices), memory systems, VLSI design and fault/defect tolerance of digital systems. He has extensively published in these areas and coauthored/edited eleven books.

"About the title" may belong to another edition of this title.

moluna

Greven, Germany

5-star seller

AbeBooks seller since July 9, 2020

Shipping rates from Germany to U.S.A.

Item	16 to 45 business days	16 to 45 business days
First item	US$ 54.98	US$ 54.98

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.

Payment methods

Bank Wire Transfer
Check
Paypal

Store description

Online Handel nur mit Neubüchern

Seller's business information

Moluna GmbH

Engberdingdamm 27
Greven, Germany 48268

Contact sellerView this seller's itemsView seller's storefront

Terms of sale

Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration

Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,

on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;

In order to exercise your revocation right, you must inform us (Moluna GmbH, Engberdingdamm 27, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.

In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.

Consequences of the revocation

If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.

We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.

You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.

You bear the direct costs for returning the products.

You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.

Criteria for exclusion or expiry

The revocation right is not available for contracts

for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.

The revocation right expires prematurely in case of contracts

for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.

Specimen - revocation form

(If you wish to revoke the contract, please fill up this form and send it back to us.)

To Moluna GmbH, Münsterstr. 105, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date

(*) Cross out the incorrect option.

Standard Business Terms and customer information / data protection declaration

I. Standard business terms

§ 1 Basic provisions

(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (Moluna GmbH) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.

(2) A ‘consumer’ in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities. The term ‘businessman’ refers to every natural person, legal person or legally responsible partnership that concludes a legal transaction in pursuance of his/its independent professional or commercial activity.

§ 2 Conclusion of the contract

(1) The subject-matter of the contract is the selling of products .

(2) If an article is placed by us with AbeBooks or ZVAB, the activation of the page on AbeBooks or ZVAB shall involve the binding offer to conclude a contract under the terms and conditions contained in the article page.

(3) The contract shall become effective via the online shopping cart system as follows:
The products intended for purchase are moved to the "shopping cart". You can select the "Shopping Cart" using the appropriate buttons on the navigation bar and make changes there at any time.
After calling up the “Checkout” page and entering the required personal data and payment and shipping conditions, all order information is then displayed again on the order summary page.
Before submitting the order, you have the ability once more to review or change any information here (you may also use the "back" button on the Internet browser), or to cancel the purchase.
By clicking the “Buy now” button to submit the order, you declare your legally binding acceptance of the order which makes the contract effective.

(4) The execution of the order and the sending of all the details necessitated by the conclusion of the contract take place via e-mail, in a partially-automated manner. Consequently, you have to ensure that the e-mail address that you have deposited with us is the correct one, and that the receipt of the respective e-mails is guaranteed. In particular, you have to ensure that the respective e-mails are not blocked by a SPAM filter.

§ 3 Right of retention, reservation of proprietary rights

(1) You can only exercise a right of retention if the situation in question involves claims arising from the same contractual relationship.

(2) The goods remain our property until the purchase price is paid in full.

(3) If you are a businessman, the following conditions also apply:

a) We retain ownership of the goods until all the claims arising from the ongoing business relationship have been settled in full. The goods subject to retention of title may not be pledged or transferred by way of security before ownership of the said goods changes hands.

b) You can re-sell the goods within the framework of an orderly transaction. In this regard, you hereby cede all the claims amounting to the magnitude of the billing amount that accrue to you as a result of the re-selling operation to us, and we accept the cession. Furthermore, you are authorised to collect the claim in question. However, insofar as you do not discharge your payment obligations in an orderly fashion, we reserve the right to collect the claim ourselves.

c) In a situation involving the combination and amalgamation of the goods subject to retention of title, we acquire co-ownership of the newly-formed item. This co-ownership corresponds to the ratio that exists between the invoice value of the goods subject to retention of title and the other processed items at the time of processing.

d) If you make a request of this nature, we shall be obligated to release the securities that are due to us, to the extent that the realisable value of our securities exceeds the claim to be secured by more than 10%. We are responsible for selecting the securities to be released.

§ 4 Warranty

(1) The statutory warranty rights are applicable.

(2) As a consumer, you are requested to promptly check the product for completeness, visible defects and transport damage as soon as it is delivered, and promptly disclose your complaints to us and the shipping company in writing. Even if you do not comply with this request, it shall have no effect on your legal warranty claims.

(3) If a characteristic of the goods deviates from the objective requirements, the deviation shall only be deemed to be agreed if you were informed of the same by us before submitting the contractual declaration and the deviation was expressly and separately agreed between the contracting parties.

(4)
Insofar as you are an entrepreneur, the following shall apply in deviation from the above warranty provisions:

a) Only our own specifications and the manufacturer's product description shall be deemed agreed as the quality of the goods, but not other advertising, public promotions and statements by the manufacturer.

b) In the event of defects, we shall, at our discretion, provide warranty by rectification of the defect or subsequent delivery. If the rectification of defects fails, you may, at your option, demand a reduction in price or withdraw from the contract. The rectification of defects shall be deemed to have failed after a second unsuccessful attempt, unless the nature of the goods or the defect or other circumstances indicate otherwise. In the event of rectification of defects, we shall not be obliged to bear the increased costs arising from the transport of the goods to a place other than the place of performance, unless such transport is in accordance with the intended use of the goods.

c) The warranty period shall be one year from delivery of the goods. The shortening of the period shall not apply

for culpable damage attributable to us arising from injury to life, limb or health and for other damage caused intentionally or by gross negligence;
insofar as we have fraudulently concealed the defect or have assumed a guarantee for the quality of the item;
in the case of items which have been used for a building in accordance with their customary use and have caused its defectiveness;
in the case of statutory rights of recourse that you may assert against us in connection with rights arising from defects.

§ 5 Choice of law, place of fulfilment, jurisdiction

(1) German law shall apply. This choice of law only applies to customers if it does not result in the revocation of the protection guaranteed by the mandatory provisions of the law of the country in which the respective customer’s usual place of residence is located (benefit-of-the-doubt principle).

(2) If you are not a consumer, but a businessman, a legal entity under public law or an institutional fund governed by public law, our place of business is the place of jurisdiction as well as the place of fulfilment for all services that follow from the business relationships that exist with us. The same condition applies to situations in which you are not associated with a general place of jurisdiction in Germany or the EU, as well as situations in which the place of residence or the usual place of residence is not known at the time of commencement of proceedings. This has no bearing on the capacity to call upon the court associated with another place of jurisdiction.

(3) The provisions of the UN Convention on Contracts for the International Sale of Goods are explicitly inapplicable.

II. Customer information

Identity of the seller

Moluna GmbH
Engberdingdamm 27
48268 Greven
Germany
Telephone: 02571/5698933
E-Mail: abe@moluna.de

Information regarding the conclusion of the contract

The technical steps associated with the conclusion of the contract, the contract conclusion itself and the correction options are executed in accordance to the regulations "conclusion of the contract" in our standard business terms (part I.).

Contractual language, saving the text of the contract

3.1 Contract language shall be English.

3.2 The complete text of the contract is not saved with us. Before the order is sent, the contract data can be printed out or electronically saved using the browser’s print function. After the order is received by us, the order data, the legally-mandated details related to distance selling contracts and the standard business terms are re-sent to you via e-mail.

Main features of the product or service

The key features of the goods and/or services can be found in the respective quote.

Prices and payment arrangements

5.1 The prices mentioned in the respective offers represent total prices, as do the shipping costs. They include all the price components, including all the incidental taxes.

5.2 The dispatch costs that are incurred are not included in the purchase price. They can be viewed by clicking the appropriate button on our website or in the respective quote, are shown separately over the course of the order transaction and must additionally be borne by you, insofar as free delivery is not confirmed.

5.3 The payment methods that are available to you are shown by clicking the appropriate button on our website or are disclosed in the respective quote.

5.4 Unless otherwise specified for the respective payment methods, the payment claims arising from the contract that has been concluded become payable immediately.

Delivery conditions

6.1 The delivery conditions, delivery date and existing supply restrictions, if applicable, can be found by clicking the appropriate button on our website or in the respective quote.

Unless a different period is specified in the item description or our delivery conditions, the goods are delivered within 3-5 days after the conclusion of the contract (in case an advance payment has been agreed upon, after the payment authorisation).

6.2 If you are a consumer, the following is statutorily regulated: The risk of the sold item accidentally being destroyed or degraded during shipping only passes over to you when the item in question is delivered, regardless of whether or not the shipping operation is insured. This condition does not apply if you have independently commissioned a transport company that has not been specified by us or a person who has otherwise been appointed to execute the shipping operation.

If you are a businessman, the delivery and shipping operations take place at your own risk.

Statutory warranty right

Liability for defects is governed by the “Warranty” provisions in our General Terms and Conditions of Business (Part I).

last update: 01.01.2022

Data protection declaration

Unless stated otherwise below, the provision of your personal data is neither legally nor contractually obligatory, nor required for conclusion of a contract. You are not obliged to provide your data. Not providing it will have no consequences. This only applies as long as the processing procedures below do not state otherwise.
“Personal data” is any information relating to an identified or identifiable natural person.

Responsible person
Contact us at any time. The contact details of the person responsible for data processing can be found in our legal notice.

Collection, processing, and transfer of personal data in orders
When you submit an order we only collect and use your personal data insofar as this is necessary for the fulfilment and handling of your order as well as processing of your queries. The provision of data is necessary for conclusion of a contract. Failure to provide it will prevent the conclusion of any contract. The processing will occur on the basis of Article 6(1) b) GDPR and is required for the fulfilment of a contract with you.
Your data is transferred here for example to the shipping companies and dropshipping providers, payment service providers, service providers for handling the order and IT service providers that you have selected. We will comply strictly with legal requirements in every case. The scope of data transmission is restricted to a minimum.

Duration of storage
After contractual processing has been completed, the data is initially stored for the duration of the warranty period, then in accordance with the retention periods prescribed by law, especially tax and commercial law, and then deleted after the period has elapsed, unless you have agreed to further processing and use.

Rights of the affected person
If the legal requirements are fulfilled, you have the following rights according to art. 15 to 20 GDPR: Right to information, correction, deletion, restriction of processing, data portability. You also have a right of objection against processing based on art. 6 (1) GDPR, and to processing for the purposes of direct marketing, according to art. 21 (1) GDPR.

Right to complain to the regulatory authority
You have the right to complain to the regulatory authority according to art. 77 GDPR if you believe that your data is not being processed legally.

Right to object
If the data processing outlined here is based on our legitimate interests in accordance with Article 6(1)f) GDPR, you have the right for reasons arising from your particular situation to object at any time to the processing of your data with future effect.
If the objection is successful, we will no longer process the personal data, unless we can demonstrate compelling legitimate grounds for the processing that outweigh your interests or rights and freedoms, or the processing is intended for the assertion, exercise or defence of legal claims.

last update: 10.01.2022

Machine Learning Systems

Item description from seller

Bibliographic details

Synopsis

About the title

About the Author