Material Modeling and Structural Mechanics
Language: English
Published by Springer, 2023
- Softcover
- New



Condition: New
US$ 141.66
Quantity: 5 available
Add to basketItem description from seller
Material Modeling and Structural Mechanics | Holm Altenbach (u. a.) | Taschenbuch | Advanced Structured Materials | xxii | Englisch | 2023 | Springer | EAN 9783030976774 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Seller Inventory # 126705472
- Title
- Material Modeling and Structural Mechanics
- Author
- Holm Altenbach (u. a.)
- Publisher
- Springer
- Publication year
- 2023
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 3030976777
- ISBN 13
- 9783030976774
- Item weight
- 546 grams
- Dimensions
- 235 x 155 x 20 mm
- Seller catalogs
- Bücher
This book presents various questions of continuum mechanical modeling in the context of experimental and numerical methods, in particular, multi-field problems that go beyond the standard models of continuum mechanics. In addition, it discusses dynamic problems and practical solutions in the field of numerical methods. It focuses on continuum mechanics, which is often overlooked in the traditional division of mechanics into statics, strength of materials and kinetics. The book is dedicated to Prof. Volker Ulbricht, who passed away on April 9, 2021.
"Synopsis" may belong to another edition of this title.
About the Author
Prof. Dr.-Ing. habil. Dr. h.c. mult Holm Altenbach has held positions at the Otto-von-Guericke-Universität Magdeburg and at Martin-Luther-Universität Halle-Wittenberg, Germany. He graduated from Leningrad Polytechnic Institute in 1980 (with a diploma on the Dynamics and Strength of Machines), where he defended his Ph.D. in 1983 and was awarded the title Doctor of Technical Sciences in 1987.
Currently, he is Full Professor of Engineering Mechanics at the Otto von Guericke University, Faculty of Mechanical Engineering, Institute of Mechanics (since 2011), and has been Acting Director of the Institute of Mechanics since 2015. His areas of scientific interest are general theory of elastic and inelastic plates and shells, creep and damage mechanics, strength theories, and nano- and micromechanics.
He has been honored with various awards, including the 1992 Krupp Award (Alexander von Humboldt Foundation); 2000 Best Paper of The Year from the Journal of StrainAnalysis for Engineering Design; 2003 Gold Medal from the Faculty of Mechanical Engineering, Politechnika Lubelska, Lublin, Poland; 2004 Semko Medal from the National Technical University of Kharkov, Ukraine; 2007 Doctor honoris causa from the National Technical University Kharkov, Ukraine; 2011 Fellow of the Japanese Society for the Promotion of Science; 2014 Doctor honoris causa from the Ovidius University of Constanta, Romania; 2016 Doctor honoris causa from the Vekua Institute, Tbilisi, Georgia; and the 2018 Alexander von Humboldt Award (Poland). Since 2019 he is a foreign member of the Russian Academy of Sciences and since 2021 – of the National Academy of Sciences of Ukraine.
Michael Beitelschmidt is since 2010 full professor for Dynamics and Mechanism Design at the Institute of Solid Mechanics at TU Dresden, Germany. From 2005 to 2010 he held the position of a full professor for Vehicle Modeling and Simulationat the Faculty of Transport and Traffic Sciences at TU Dresden. Since 2019 he is the Director of the Institute of Solid Mechanics and since 2008 the Dean of Studies for Mechatronics.
His research topics comprise the simulation of dynamics, vibration and acoustics applied to several industrial fields e.g. railway vehicles or textile machines. Other applications are thermoelectrics and thermomechanics. Since a few years robotics and drone technology are emerging research fields. In 2016 he spent 6 months as visiting professor at the University of Illinois at Chicago with Prof. Ahmed Shabana.
From 1998 to 2005 Michael Beitelschmidt worked at Sulzer Innotec (R&D division) in Wintherthur (Switzerland) as engineer, the last position was the head of the mechanics department.
He completed his dissertation (Ph.D. thesis) in 1998 in impacts in multi-body systems at TU München under the supervision of Prof. Friedrich Pfeiffer.
He is a reviewer for multiple scientific journals and research funding organizations. Since 2019 he is review board member of the DFG (German Research Foundation).
Since 1998, Michael Beitelschmidt has published more than 120 conference and journal articles. He is co-author of two textbooks.
Professor Markus Kästner obtained his postdoctoral lecture qualification (Habilitation) for Solid Mechanics, Technische Universität Dresden, during 2015/12. In 2009/12, Prof. Markus Kästner did his graduation with doctoral degree Dr.-Ing. (with distinction) at Technische Universität Dresden, under Prof. V. Ulbricht being Supervisor. In 2016/10, Prof. Markus Kästner is a present Full Professor for Computational and Experimental Solid Mechanics and Acting Head of durability working group, Institute of Solid Mechanics, Technische Universität Dresden. During 2014/05-10, Prof. Markus Kästner did research visit in the University of Glasgow with the host Prof. René de Borst.
Prof. Markus Kästneris's Postdoctoral Scholarship (DAAD) includes the following: Head of working group Multiscale Modeling and Simulation Institute of Solid Mechanics, Technische Universität Dresden, in 2012/01–2016/09; Research Associate, Institute of Solid Mechanics, Technische Universität Dresden, in 2004/12–2011/12; in 2021, Editor of Special Issue on additive manufacturing, GAMM-Mitteilungen; in 2021, Editor of Special Issue on exploiting process-induced residual stresses, Archive of Applied Mechanics; in 2019, present Member of editorial board Archive of Applied Mechanics; in 2019, present Member of the German Association for Computational Mechanics (GACM); in 2017, present Member of the International Association of Applied Mathematics and Mechanics (GAMM); and in 2014, present Member Dresden Center for Computational Materials Science (DCMS).
During 2012/1-2015/12 PI CRC 639, Prof. Markus Kästneris was Ongoing Reviewer for DAAD, DFG, AvH Foundation, HRZZ, and STIFT for several scientific journals including Nature, Computational Mechanics, Computer Methods in Applied Mechanics and Engineering, International Journal for Numerical Methods in Engineering, Journal of Computational Physics, and Mechanics of Materials.
Thomas Wallmersperger is a Full Professor for Mechanics of Multifunctional Structures at the Institute of Solid Mechanics at TU Dresden, Germany (since 2011), and Associate Dean of the Faculty of Mechanical Science and Engineering at TU Dresden since 2016. From 2016 until 2019 he served as Director of the Institute of Solid Mechanics.
His research topics comprise coupled multi-field problems, adaptive materials and smart structures, modeling and simulation of soft and hard materials, discretization and numerical methods. Thomas Wallmersperger completed his dissertation (Ph.D. thesis) in 2003 and his habilitation in 2010 at University of Stuttgart, Germany. In the years 2005 and 2006 he conducted research stays as Visiting Professor at the Center for Intelligent Material Systems and Structures at Virginia Polytechnic Institute and State University, VA, US, in the field of Electroactive Ionic Polymers with the Professors Donald J. Leo and Daniel J. Inman.
He has been a reviewer for multiple scientific journals and organizer of the Second International Symposium on Design, Modeling and Experiments of Adaptive Structures and Smart Systems (DeMEASS II) and of DeMEASS VII.
Professor Wallmersperger is Associate Editor of the Journal of Intelligent Material Systems and Structures, Editorial Advisory Board Member of Acta Mechanica, Advisory Committee Member of the International Symposium on Design, Modelling and Experiments of Adaptive Structures and Smart Systems, and Program Committee Member for theSPIE-Conference Electroactive Polymer Actuators and Devices (EAPAD).
Since 2000, Thomas Wallmersperger has published more than 150 conference and journal articles.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 60 to 60 business days | 60 to 60 business days |
|---|---|---|
| First item | US$ 78.78 | US$ 78.78 |
Payment methods
- Paypal
Store description
preigu betreibt einen Onlineversandhandel mit über 1 Mio. Produkten in verschiedenen Sortimenten. Das Kernsortiment besteht aus Büchern, Medien und Spielwaren. Ein gelungenes Einkaufserlebnis ist das Ziel einer jeden Bestellung bei preigu, denn der Kunde und seine Zufriedenheit stehen an erster Stelle. preigu setzt daher auf einen kompetenten Kundenservice, funktionierende Prozesse und schnelle Reaktion.
Specialty
Bücher, SpielwarenSeller's business information
preigu GmbH & Co. KG
Lengericher Landstraße 19
Osnabrück, Germany 49078
Terms of sale
Standard Business Terms and customer information
I. Standard business terms
§ 1 Basic provisions
(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (preigu GmbH & Co. KG) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.
(2) A ‘consumer' in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities. The term ‘businessman' refers to every natural person, legal person or legally responsible partnership that concludes a legal transaction in pursuance of his/its independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The subject-matter of the contract is the selling of products .
(2) If an article is placed by us with AbeBooks or ZVAB, the activation of the page on AbeBooks or ZVAB shall involve the binding offer to conclude a contract under the terms and conditions contained in the article page.
(3) The contract shall become effective via the online shopping cart system as follows:
The products intended for purchase are moved to the "shopping cart". You can select the "Shopping Cart" using the appropriate buttons on the navigation bar and make changes there at any time.
After calling up the "Checkout" page and entering the required personal data and payment and shipping conditions, all order information is then displayed again on the order summary page.
Before submitting the order, you have the ability once more to review or change any information here (you may also use the "back" button on the Internet browser), or to cancel the purchase.
By clicking the "Buy now" button to submit the order, you declare your legally binding acceptance of the order which makes the contract effective.
(4) The execution of the order and the sending of all the details necessitated by the conclusion of the contract take place via e-mail, in a partially-automated manner. Consequently, you have to ensure that the e-mail address that you have deposited with us is the correct one, and that the receipt of the respective e-mails is guaranteed. In particular, you have to ensure that the respective e-mails are not blocked by a SPAM filter.
§ 3 Right of retention, reservation of proprietary rights
(1) You can only exercise a right of retention if the situation in question involves claims arising from the same contractual relationship.
(2) The goods remain our property until the purchase price is paid in full.
§ 4 Warranty
(1) The statutory warranty rights are applicable.
(2) As a consumer, you are requested to promptly check the product for completeness, visible defects and transport damage as soon as it is delivered, and promptly disclose your complaints to us and the shipping company in writing. Even if you do not comply with this request, it shall have no effect on your legal warranty claims.
(3) If a characteristic of the goods deviates from the objective requirements, the deviation shall only be deemed to be agreed if you were informed of the same by us before submitting the contractual declaration and the deviation was expressly and separately agreed between the contracting parties.
§ 5 Choice of law, place of fulfilment, jurisdiction
(1) German law shall apply. This choice of law only applies to customers if it does not result in the revocation of the protection guaranteed by the mandatory provisions of the law of the country in which the respective customer's usual place of residence is located (benefit-of-the-doubt principle).
(2) If you are not a consumer, but a businessman, a legal entity under public law or an institutional fund governed by public law, our place of business is the place of jurisdiction as well as the place of fulfilment for all services that follow from the business relationships that exist with us. The same condition applies to situations in which you are not associated with a general place of jurisdiction in Germany or the EU, as well as situations in which the place of residence or the usual place of residence is not known at the time of commencement of proceedings. This has no bearing on the capacity to call upon the court associated with another place of jurisdiction.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods are explicitly inapplicable.
II. Customer information
- Identity of the seller
preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany
Telephone: 0541-580 72 84
E-Mail: mail@preigu.de
We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.
- Information regarding the conclusion of the contract
The technical steps associated with the conclusion of the contract, the contract conclusion itself and the correction options are executed in accordance to the regulations "conclusion of the contract" in our standard business terms (part I.).
- Contractual language, saving the text of the contract
3.1 Contract language shall be English.
3.2 The complete text of the contract is not saved with us. Before the order is sent, the contract data can be printed out or electronically saved using the browser's print function. After the order is received by us, the order data, the legally-mandated details related to distance selling contracts and the standard business terms are re-sent to you via e-mail.
- Main features of the product or service
The key features of the goods and/or services can be found in the respective quote.
- Prices and payment arrangements
5.1 The prices mentioned in the respective offers represent total prices, as do the shipping costs. They include all the price components, including all the incidental taxes.
5.2 The dispatch costs that are incurred are not included in the purchase price. They can be viewed by clicking the appropriate button on our website or in the respective quote, are shown separately over the course of the order transaction and must additionally be borne by you, insofar as free delivery is not confirmed.
5.3 If delivery is made to countries outside of the European Union, we may incur unreasonable additional costs, such as duties, taxes or money transfer fees (transfer or foreign exchange fees charged by the banks), which you must bear.
5.4 You must also bear the costs arising from money transfers in cases in which the delivery is made to an EU Member State, but the payment is initiated outside of the European Union.
5.5 The payment methods that are available to you are shown by clicking the appropriate button on our website or are disclosed in the respective quote.
5.6 Unless otherwise specified for the respective payment methods, the payment claims arising from the contract that has been concluded become payable immediately.
- Delivery conditions
6.1 The delivery conditions, delivery date and existing supply restrictions, if applicable, can be found by clicking the appropriate button on our website or in the respective quote.
Unless a different period is specified in the item description or our delivery conditions, the goods are delivered within 3-5 days after the conclusion of the contract (in case an advance payment has been agreed upon, after the payment authorisation).
6.2 If you are a consumer, the following is statutorily regulated: The risk of the sold item accidentally being destroyed or degraded during shipping only passes over to you when the item in question is delivered, regardless of whether or not the shipping operation is insured. This condition does not apply if you have independently commissioned a transport company that has not been specified by us or a person who has otherwise been appointed to execute the shipping operation.
- Statutory warranty right
Liability for defects is governed by the "Warranty" provisions in our General Terms and Conditions of Business (Part I).
Information on battery disposal
In connection with the sale of batteries or the delivery of devices containing batteries, we are obliged to inform you of the following:
Batteries must not be disposed of with household waste.
You can either return used batteries that we carry or have carried in our range as new batteries to us at your own expense or return them free of charge to our shipping warehouse (shipping address). Alternatively, you can hand in the batteries at your local collection points.
As an end user, you are legally obliged to return used batteries so that they can be recycled or disposed of properly.
Used batteries may contain harmful substances that can damage the environment or your health if not stored or disposed of properly. However, batteries also contain important raw materials such as iron, zinc, manganese or nickel and can be recycled.
The symbols on the batteries have the following meanings:
The symbol of the crossed-out wheelie bin means that the battery must not be disposed of with household waste.
For batteries containing a certain amount of lead, cadmium or mercury, the following additions below the symbol with the crossed-out wheelie bin indicate the respective pollutants:
Pb = Battery contains more than 0.004% lead by weight
Cd = Battery contains more than 0.002% cadmium by weight
Hg = Battery contains more than 0.0005% mercury by weight
Information on the costs involved in accordance with Article 56 (4) of the EU Battery Regulation (Regulation 2023/1542) can be found at the ‘Batterie-Zurück (https://www.batterie-zurueck.de/de/bewirtschaftungvonaltbatterien/)' initiative.
Please pay attention to the above instructions.