Materials Characterization Using Nondestructive Evaluation (NDE) Methods (Woodhead Publishing Series in Electronic and Optical Materials). This item is unavailable.Materials Characterization Using Nondestructive Evaluation (NDE) Methods (Woodhead Publishing Series in Electronic and Optical Materials)

Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures.

Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries.

Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress.

• Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques
• Reviews the determination of microstructural and mechanical properties
• Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries
• Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials

Dr. Gerhard Hübschen worked for more than 30 years at the Fraunhofer Institute for Nondestructive Testing (IZFP), Germany, in the department for “Materials characterization, defect detection and lifetime management”

Dr. Iris Altpeter worked for more than 30 years at the Fraunhofer Institute for Nondestructive Testing (IZFP), Germany, and was the head of the department for “Materials characterization, defect detection and lifetime management”.

Dr. Ralf Tschuncky has been a member of the department for materials characterization at the Fraunhofer Institute for Nondestructive Testing (IZFP), Germany for more than 15 years.

Prof. Hans-Georg Herrmann holds the chair of Lightweight Systems at Saarland University, Germany, and is also head of the department “In-service Inspection & Life-cycle Monitoring” and deputy director at the Fraunhofer IZFP.