Membrane Technology for Co2 Sequestration and Separation

This book addresses the fundamentals of CO2 storage for long-term sequestration in a subsurface geologic formation. In general, membrane gas separation can find a large room of application in flue gas. To achieve the development of this technology on a larger scale than which is possible in the lab we have to use membrane engineering. Consequently, greater emphasis is placed on novel materials for gas separation. Possible design strategies and role of novel materials are discussed. Additionally, the latest progress in design and preparation of asymmetric membranes for natural gas purification are highlighted. In fact, further development should focus on module and process design in order to bring gas separation membrane technology into commercial application. Therefore, the keys issues to propel current research towards industrial application are examined. Besides, the feasibility of implementing polyimide membrane for CO2 removal under real industrial conditions and its economic viability are highlighted. In order to exhibit excellent film-forming properties, zeolite membrane and cellulose acetate butyrate membrane areaddressed. Interestingly, it was found that the most accurate theoretical three-phase model is arguably revised Pal model with average percentage error of 0.74%.

Dr. Zeinab Abbas Jawad is currently a senior lecturer in the Department of Chemical Engineering, Curtin University Malaysia. She had been awarded her PhD Degree in Chemical Engineering from University Sains Malaysia in 2014. Her research focus is on the development of Mixed Matrix Membrane for CO Separation. She is specifically interested in 2 the fundamental transport phenomena across the membrane and utilization of this membrane based separation technique to control environmental pollution issues.