Micro-Electrode-Dot-Array Digital Microfluidic Biochips
Zipeng Li|Krishnendu Chakrabarty|Tsung-Yi Ho|Chen-Yi Lee
New - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketDieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Presents a method for droplet size-aware high-level synthesis, targeting reservoir placement, operation scheduling, module placement, and routing of droplets of various sizes in a MEDA biochip Enables efficient and adaptive error recovery, throug.
Seller Inventory # 252294578
This book provides an insightful guide to the design, testing and optimization of micro-electrode-dot-array (MEDA) digital microfluidic biochips. The authors focus on the characteristics specific for MEDA biochips, e.g., real-time sensing and advanced microfluidic operations like lamination mixing and droplet shape morphing. Readers will be enabled to enhance the automated design and use of MEDA and to develop a set of solutions to facilitate the full exploitation of design complexities that are possible with standard CMOS fabrication techniques. The book provides the first set of design automation and test techniques for MEDA biochips. The methods described in this book have been validated using fabricated MEDA biochips in the laboratory. Readers will benefit from an in-depth look at the MEDA platform and how to combine microfluidics with software, e.g., applying biomolecular protocols to software-controlled and cyberphysical microfluidic biochips.
Zipeng Li received the bachelor’s degree in microelectronics from the Harbin Institute of Technology, Harbin, China, in 2013, and the master’s and Ph.D. degrees in computer engineering from Duke University, Durham, NC, USA, in 2015 and 2017, respectively. Dr. Li is currently a Senior DFT Engineer with Intel Corporation, Santa Clara, CA, USA. His current research interests include design automation for biochips, design-for-test, 2.5-D/3-D ICs, and mixed-technology microsystems.
Krishnendu Chakrabarty received the B. Tech. degree from the Indian Institute of Technology, Kharagpur, in 1990, and the M.S.E. and Ph.D. degrees from the University of Michigan, Ann Arbor, in 1992 and 1995, respectively. He is now the William H. Younger Distinguished Professor and Department Chair of Electrical and Computer Engineering, and Professor of Computer Science, at Duke University.
Prof. Chakrabarty is a recipient of the National Science Foundation CAREER award, the Office of Naval Research Young Investigator Award, the Humboldt Research Award from the Alexander von HumboldtFoundation, Germany, the IEEE Transactions on CAD Donald O. Pederson Best Paper Award (2015), the ACM Transactions on Design Automation of Electronic Systems Best Paper Award (2017), and over a dozen best paper awards at major conferences. He is also a recipient of the IEEE Computer Society Technical Achievement Award (2015), the IEEE Circuits and Systems Society Charles A. Desoer Technical Achievement Award (2017), the Semiconductor Research Corporation Technical Excellence Award (2018), and the Distinguished Alumnus Award from the Indian Institute of Technology, Kharagpur (2014). He is a Hans Fischer Senior Fellow at the Institute for Advanced Study, Technical University of Munich, Germany. He is a 2018 recipient of the Japan Society for the Promotion of Science (JSPS) Fellowship in the “Short Term S: Nobel Prize Level” category.
Tsung-Yi Ho received the Ph.D. degree in electrical engineering from National Taiwan University, Taipei, Taiwan, in 2005. He is a Professor with the Department of Computer Science, National Tsing Hua University, Hsinchu, Taiwan. His current research interests include design automation and test for microfluidic biochips and nanometer integrated circuits. He has presented 10 tutorials and contributed 11 special sessions in ACM/IEEE conferences, all in design automation for microfluidic biochips.
Prof. Ho was a recipient of the Invitational Fellowship of the Japan Society for the Promotion of Science, the Humboldt Research Fellowship by the Alexander von Humboldt Foundation, the Hans Fischer Fellow by the Institute of Advanced Study of the Technical University of Munich, the best paper awards at the VLSI Test Symposium in 2013, and the IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITSAND SYSTEMS in 2015. He is an Associate Editor of the ACM Journal on Emerging Technologies in Computing Systems, ACM Transactions on Design Automation of Electronic Systems, ACM Transactions on Embedded Computing Systems, the IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, and the IEEE TRANSACTIONS ON VERY LARGE SCALE INTEGRATION SYSTEMS. He served as a Distinguished Visitor of the IEEE Computer Society for 2013 to 2015, the Chair of the IEEE Computer Society Tainan Chapter for 2013 to 2015, and the Chair of the ACM SIGDA Taiwan Chapter for 2014 to 2015. He currently serves as an ACM Distinguished Speaker, a Distinguished Lecturer of the IEEE Circuits and Systems Society, and the Technical Program Committees of major conferences, including DAC, International Conference on Computer-Aided Design, Design, Automation & Test in Europe Conference, Asia and South Pacific Design Automation Conference, International Symposium on Physical Design, and International Conference on Computer Design.
Chen-Yi Lee received the B.S. degree in electrical engineering from National Chiao Tung University (NCTU), Hsinchu, Taiwan, in 1982 and the M.S. and Ph.D. degrees in electrical engineering from Katholieke University Leuven, Leuven, Belgium, in 1986 and 1990, respectively. From 1986 to 1990, he was with IMEC/VSDM, Leuven, researching in the area of architecture syn- thesis for DSP. In 1991, he joined the Department of Electronics Engineering and from 2003 to 2006. From 2000 to 2003, hewas the Director of National CHIP Implementation Center and the Co-Ordinator of Microelectronics Program of Engineering Division, National Security Council, Taipei, Taiwan. He was the Dean of office of research and development from 2007 to 2010, NCTU. He currently serves as the Co-Program Director of National Program of Intelligent Electronics and a Professor of the Department of Electronics Engineering, NCTU. His current research interests include very large scale integration (VLSI) algorithms and architectures for high- throughput DSP applications. He is also active in various aspects of micro sensing, low-power system-on-chip, and deep learning.
Prof. Lee was a recipient of the Outstanding Technology Licensing Award from National Science Council in 2007 and 2008, the Industry Contribution Award from Ministry of Economic Affairs, and the Outstanding Research Award from National Science Council in 2009. He served as the Program Committee Member of IEEE International Solid-State Circuits Conference in 2004–2006, Design, Automation & Test in Europe Conference TPC Member in 2006 and 2007, IEEE Asian Solid-State Circuits Conference TPC Member in 2006–2014, IEEE VLSI Symposium Committee Member in 2010–2014, IEEE Transactions on Circuits and Systems-II Associate Editor in 2010 and 2011, and the Past-Chair of Taipei Chapter of IEEE Circuits and Systems Society.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 26 to 60 business days | 26 to 60 business days |
|---|---|---|
| First item | US$ 56.97 | US$ 56.97 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.