0975569848 Item in very good condition and at a great price! Textbooks may not include supplemental items i.e. CDs, access codes etc. Bookseller Inventory #
Synopsis: This book is about a very different kind of architecture than the buildings we see around us at the beginning of the 21st Century. It explores the use of air and liquid pressure as the principal structural element of multi-story buildings. Several variants of such building structures are examined in detail. In multi-story air-supported buildings the internal building environment is maintained at a pressure that normally does not exceed twice atmospheric pressure, so that the physiological impact of a hyperbaric environment are minimized. The entire building acts as a column with a circular cross-section and a lightweight flexible membrane wall that is surrounded by a network of diagonal and horizontal cables. Floors are suspended from the roof, which is directly supported by the ambient internal air pressure. The structural design, fire protection, water and sanitary services implications, airlock entrance and exit facilities, thermal characteristics, construction sequence, comparison with orthodox building costs, and general safety considerations are discussed. A prototype multi-story air-supported building constructed as a student project by the author at the University of New South Wales in Sydney, Australia is described in detail. A less revolutionary structural alternative consists of one or more columns that are internally pressurized with water, air, or a granular material. Typically composed of a thin metal wall such thin-walled cylindrical shell structures (i.e., monocoque cylinders) have received a great deal of attention from mechanical and aeronautical engineers due to their wide-spread application in aircraft, missiles, and rockets for space travel. The application of such pressurized columns in multi-story building structures is examined both from the point of view of providing vertical support for suspended floor systems, as well as serving as the horizontal compression counterpart of suspension cables in lightweight floor systems. A prototype building supported by an internally pressurized central column that acts not only as the vertical support element but also as a store for solar heat collected at roof level is described. The book also includes a comprehensive historical review, structural design analysis, behavior under wind loads, examination of thermal characteristics, and material requirements of single-story air-buildings in two appendices. Such buildings have been in common use for mostly large-span applications since the 1940s. Those sections are included for the sake of completeness, since these more common air-buildings are part of the field of fluid-supported structures.
About the Author: Jens G. Pohl received a Bachelor of Architecture from Melbourne University, and Master of Building Science and Ph.D. degrees in Architectural Science from Sydney University in Australia. He was a registered architect and a Fellow of the Royal Australian Institute of Architects and the Australian Institute of Building, as well as a member of the American Institute of Constructors until his retirement from the Architecture Department at California Polytechnic State University (Cal Poly) in San Luis Obispo, California in 2010. At retirement he had served for 20 years as Director of the Architecture Graduate Program and as Executive Director of the Collaborative Agent Design Research Center (CADRC), and concurrently for the last three years as Director of the Knowledge Management Laboratory (KML) Center industry and academic consortium at Scott Air Force Base in Illinois. The International Institute for Advanced Studies in Systems Research and Cybernetics awarded him an honorary doctorate in 1998 and the President’s Medal of Distinguished Achievement in 2010. Dr. Pohl is the holder of two joint patents and the author of more than 100 papers and articles, as well as several chapters and books on building science, solar systems, lightweight structures, knowledge-based computer-aided architectural design, and computer-based decision support systems involving distributed artificial intelligence concepts and design principles.
Title: Multi-Story Air-Supported and Fluid-Inflated...
Publisher: Jens G. Pohl Ph.D.
Book Condition: Very Good
Book Description Jens G. Pohl Ph.D., 2013. Condition: Good. Shows some signs of wear, and may have some markings on the inside. Seller Inventory # GRP101980790
Book Description Jens G. Pohl Ph.D., 2013. Condition: Very Good. Great condition for a used book! Minimal wear. Seller Inventory # GRP101980799
Book Description Jens G. Pohl Ph.D., 2013. Condition: UsedAcceptable. book. Seller Inventory # M0975569848_4
Book Description Jens G. Pohl Ph.D., 2013. Paperback. Condition: Brand New. 330 pages. 11.00x8.50x0.75 inches. In Stock. Seller Inventory # zk0975569848
Book Description Jens G. Pohl Ph.D., 2013. Condition: New. book. Seller Inventory # M0975569848
Book Description Jens G. Pohl Ph.D., 2013. Condition: New. book. Seller Inventory # MB00Z8E18E0
Book Description Jens G. Pohl Ph.D., 2013. Paperback. Condition: Good. Ships with Tracking Number! INTERNATIONAL WORLDWIDE Shipping available. May not contain Access Codes or Supplements. May be ex-library. Shipping & Handling by region. Buy with confidence, excellent customer service!. Seller Inventory # 0975569848