NETWORK PROCESSOR DESIGN
Book 7 of 28: The Morgan Kaufmann Series in Computer Architecture and DesignNew - Soft cover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketIllustrates the potential for NP applications, helping to lay a theoretical foundation for the architecture, evaluation, and programming of networking processors. This volume emphasizes research in the areas of architecture, tools and techniques, and applic.
Seller Inventory # 594355818
The past few years have seen significant change in the landscape of high-end network processing. In response to the formidable challenges facing this emerging field, the editors of this series set out to survey the latest research and practices in the design, programming, and use of network processors.
Through chapters on hardware, software, performance and modeling, Network Processor Design illustrates the potential for new NP applications, helping to lay a theoretical foundation for the architecture, evaluation, and programming of networking processors.
Like Volume 2 of the series, Volume 3 further shifts the focus from achieving higher levels of packet processing performance to addressing other critical factors such as ease of programming, application developments, power, and performance prediction. In addition, Volume 3 emphasizes forward-looking, leading-edge research in the areas of architecture, tools and techniques, and applications such as high-speed intrusion detection and prevention system design, and the implementation of new interconnect standards.
Mark A. Franklin received his B.A., B.S.E.E. and M.S.E.E. from Columbia University, and his Ph.D. in EE from Carnegie-Mellon University. He is currently at Washington University in St. Louis where he has a joint appointment in Electrical Engineering and Computer Science, and holds the Urbauer Chair in Engineering. He founded and is Director of the Computer and Communications Research Center and until recently was the Director of the Undergraduate Program in Computer Engineering. Dr. Franklin is engaged in research, teaching and consulting in the areas of computer and communications architectures, ASIC and embedded processor design, parallel and distributed systems, and systems performance evaluation. He is a Fellow of the IEEE, a member of the ACM, and has been an organizer and reviewer for numerous professional conferences including the HPCA8 Workshop on Network Processors (2002). He has been Chair of the IEEE TCCA (Technical Committee on Computer Architecture), and Vice-Chairman of the ACM SIGARCH (Special Interest Group on Computer Architecture).
Haldun Hadimioglu received his BS and MS degrees in Electrical Engineering at Middle East Technical University, Ankara Turkey and his Ph.D. in Computer Science from Polytechnic University in New York. He is currently an Industry Associate Professor in the Computer Science Department and a member of the Computer Engineering faculty at the Polytechnic University. He worked as a research engineer at PETAS, Ankara Turkey (1980-1982). Dr. Hadimioglu's research and teaching interests include Computer Architecture, Parallel and Distributed Systems, Networking and VLSI Design. He was a guest editor of the special issue on "Advances in High Performance Memory Systems," IEEE Transactions on Computers (Nov 2001) and has reviewed papers for leading journals such as the IEEE Transactions on Computers. Hadimioglu is a member of the IEEE, the ACM, and Sigma Xi. He has been an organizer of various workshops including, the ISCA Memory Wall (2000), ISCA Memory Performance Issues (2002, 2001) and HPCA8 Workshop on Network Processors (2002). He received Dedicated Faculty and Outstanding Faculty awards from Polytechnic students in 1995 and 1993, respectively.
Peter Z. Onufryk received his B.S.E.E. from Rutgers University, M.S.E.E. from Purdue University, and Ph.D. in Electrical and Computer Engineering from Rutgers University. He is currently a director in the Internetworking Products Division at Integrated Device Technology, Inc. where he is responsible for architecture definition and validation of communications products. Before joining IDT, Peter was a researcher for thirteen years at AT&T Labs - Research (formally AT&T Bell Labs) where he worked on communications systems and parallel computer architectures. These included a number of parallel, cache-coherent multiprocessor and dataflow based machines that were targeted towards high performance military systems. Other work there focused on packet telephony and early network processors. Onufryk is a member of the IEEE. He was an organizer and program committee member of the HPCA8 Workshop on Network Processors 2002. Peter was the architect of four communications processors as well as numerous ASICs, boards, and systems.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 26 to 60 business days | 26 to 60 business days |
|---|---|---|
| First item | US$ 58.07 | US$ 58.07 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.