Progress in Nanoscale Characterization and Manipulation
Language: English
Published by Springer, 2019
- Softcover
- New
Seller: preigu, Osnabrück, Germanypreigu
AbeBooks seller since August 5, 2024
Condition: New
US$ 130.50
Quantity: 5 available
Add to basketItem description from seller
Seller Inventory # 115343878
- Title
- Progress in Nanoscale Characterization and Manipulation
- Author
- Rongming Wang (u. a.)
- Publisher
- Springer
- Publication year
- 2019
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 9811344205
- ISBN 13
- 9789811344206
- Item weight
- 774 grams
- Dimensions
- 235 x 155 x 28 mm
- Series
- Book 213 of 227: Springer Tracts in Modern Physics
- Seller catalogs
- Bücher
"Synopsis" may belong to another edition of this title.
About the Author
Rongming WANG received his Bachelor and Master’s Degrees in Physics from Peking University and Ph. D. in Materials Science from Beijing Institute of Aeronautical Materials, China. In 2004-2005, he was a visiting scholar in University of California, Berkeley. Then he joined Beihang University as a Professor in physics. Currently, he is a professor in University of Science and Technology Beijing and director of Beijing Key Laboratory for Magneto-Photoelectrical Composite and Interface Science. His research interests include magnetic nanomaterial, transmission electron microscopy and interface science.
Prof. Rongming Wang has published over 200 articles including Phys. Rev. Lett., Adv. Mater., J. Am. Chem. Soc., Angew. Chim. Int. Edit., Nano Lett. etc. and presented over 60 invited talks in international and national conferences, universities and institutes. The papers have been cited over 6,000 time citations by SCI journals and citation H factor of 43. He has won several awards including National Prize for Natural Sciences, Scientific Chinese Prize for People of the Year 2012, State Council Expert for Special Allowance, etc.
Chen Wang received his B.S. degree from University of Science and Technology of China in 1986. After obtaining PhD degree from University of Virginia in 1992, he joined Arizona State University as a postdoctoral associate. In 1994, he became a professor of Central China Normal University. He was a faculty of the Institute of Chemistry, Chinese Academy of Sciences from 1995 to 2004, and is currently a professor of National Center for Nanoscience and Technology of China.
Research in the Wang’s group focuses on many aspects of surface physical chemistry and nano-bio interface, including the principle of scanning tunneling microscopy and its applications, nanoscale physical and chemical phenomena at interface, and molecular self-assembly, and single molecule physics and chemistry, etc. Wang and his collaborators have engaged in constructing low-dimensional molecular nanostructures on surfaces through multilevel self-assembling processes. Such multilevel process can be categorized depending on symmetry characteristics and nature of intermolecular interactions.
In recent years, his group has engaged in studying molecular mechanisms of peptide assemblies relating to disease diagnosis and treatment techniques. In the recent studies, the fine folding and assembling characteristics of amyloid peptides at the level of single molecules are being pursued. The insight of the assemble peptide and protein structures could provide basis for developing diagnosis and therapeutics for neurodegenerative diseases.
He has published more than 200 papers in international peer-reviewed journals including Chem. Soc. Rev., Proc. Natl. Acad. Sci., J. Am. Chem. Soc., Angew. Chem. Int. Ed., Nano Lett. etc. He published 4 books in Chinese or English.
Hongzhou ZHANG received his Bachelor and Master’s degrees in Physics at Peking University (China) and PhD in Applied Physics at Rice University (US) in 1999. He worked as a Research Fellow at the Australian National University for three years before he joined Trinity College Dublin (TCD) in 2009. He is now an Associate Professor at the School of Physics, TCD and a Principal Investigator at CRANN/AMBER, the Irish national nanoscience centre. His research is focused on the applications of helium-ion microscopy in nanomaterial imaging and modification and he is recognized internationally as a pioneering researcher in the field (h-index: 30; total citation counts 4405). Since 2009, he has secured 15 research projects from diverse Irish and EU funding agencies and industries.
Jing Tao received her B. S. in Physics at Peking University in 1997. She carried out her Masters research at Arizona State University and conducted her PhD research at University of Illinois at Urbana-Champaign. After received the PhD in 2005, she moved to Oak Ridge National Laboratory as a postdoctoral researcher. Dr. Tao is now a physicist working in Condensed Matter Physics & Materials Science Department of Brookhaven National Laboratory, sponsored by US Department of Energy (DOE). Dr. Tao has been working on the structure-property relationship in strongly correlated systems and functional nanomaterials with over 70 publications. Dr. Tao is a recipient of DOE Early Career Award for the project of “Tracing non-equilibrium phenomena in correlated materials by using ultrafast electron probes” in May 2015.
Xuedong Bai is a professor at Institute of Physics, Chinese Academy of Sciences (CAS). He graduated in physics from Northeast Normal University (1990) and obtained his PhD in materials science and engineering from Institute of Metal Research, CAS (1999). He did his research in National Institute of Material Science (NIMS), Japan (2004-2005) as a visiting professor and worked at Georgia Institute of Technology (2001-2003) as a post-doctoral fellow. Xuedong Bai researches low-dimensional materials physics, the approach is in-situ transmission electron microscopy (TEM), in a way that it can directly correlate the atomic-scale structure with physical and chemical properties by a combination of scanning tunneling microscopy (STM) and TEM. This study primarily involves nanomanipulation and nanomeasurements of intrinsic properties of low-dimensional nanostructured materials. Recently, the solid-state ionic transport is also probed driven by the operation mechanism of energy, catalysis and information devices. In the above fields, he is the co-author of over 150 papers in peer-reviewed journals (2 in Nature, 5 in Nature serials, 2 in PNAS, 10 in JACS, 27 in APL, 8 in Nano Lett., and 5 in Adv. Mater.) and co-inventor on 11 patents. He delivered over 50 keynote/invited talks including MRS and AVS congress. Dr. Bai’s H-index is 44 with over 7000 citations. Xuedong Bai was named a number of academic awards, including National 10000 Talent Program Scientists (2016), Hu Gang-Fu Physics Award (Chinese Physics Society, 2015), the 2nd Place of the National Science and Technology Award (2011), the 1st Place of the Science and Technology Award of Beijing (2008), and Outstanding Young Research Foundation (NSFC, 2007) etc.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 60 to 60 business days | 60 to 60 business days |
|---|---|---|
| First item | US$ 81.59 | US$ 81.59 |
Payment methods
Store description
Specialty
Bücher, SpielwarenSeller's business information
preigu GmbH & Co. KG
Lengericher Landstraße 19
Osnabrück, Germany 49078
Terms of sale
Standard Business Terms and customer information
I. Standard business terms
§ 1 Basic provisions
(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (preigu GmbH & Co. KG) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.
(2) A ‘consumer' in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities. The term ‘businessman' refers to every natural person, legal person or legally responsible partnership that concludes a legal transaction in pursuance of his/its independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The subject-matter of the contract is the selling of products .
(2) If an article is placed by us with AbeBooks or ZVAB, the activation of the page on AbeBooks or ZVAB shall involve the binding offer to conclude a contract under the terms and conditions contained in the article page.
(3) The contract shall become effective via the online shopping cart system as follows:
The products intended for purchase are moved to the "shopping cart". You can select the "Shopping Cart" using the appropriate buttons on the navigation bar and make changes there at any time.
After calling up the "Checkout" page and entering the required personal data and payment and shipping conditions, all order information is then displayed again on the order summary page.
Before submitting the order, you have the ability once more to review or change any information here (you may also use the "back" button on the Internet browser), or to cancel the purchase.
By clicking the "Buy now" button to submit the order, you declare your legally binding acceptance of the order which makes the contract effective.
(4) The execution of the order and the sending of all the details necessitated by the conclusion of the contract take place via e-mail, in a partially-automated manner. Consequently, you have to ensure that the e-mail address that you have deposited with us is the correct one, and that the receipt of the respective e-mails is guaranteed. In particular, you have to ensure that the respective e-mails are not blocked by a SPAM filter.
§ 3 Right of retention, reservation of proprietary rights
(1) You can only exercise a right of retention if the situation in question involves claims arising from the same contractual relationship.
(2) The goods remain our property until the purchase price is paid in full.
§ 4 Warranty
(1) The statutory warranty rights are applicable.
(2) As a consumer, you are requested to promptly check the product for completeness, visible defects and transport damage as soon as it is delivered, and promptly disclose your complaints to us and the shipping company in writing. Even if you do not comply with this request, it shall have no effect on your legal warranty claims.
(3) If a characteristic of the goods deviates from the objective requirements, the deviation shall only be deemed to be agreed if you were informed of the same by us before submitting the contractual declaration and the deviation was expressly and separately agreed between the contracting parties.
§ 5 Choice of law, place of fulfilment, jurisdiction
(1) German law shall apply. This choice of law only applies to customers if it does not result in the revocation of the protection guaranteed by the mandatory provisions of the law of the country in which the respective customer's usual place of residence is located (benefit-of-the-doubt principle).
(2) If you are not a consumer, but a businessman, a legal entity under public law or an institutional fund governed by public law, our place of business is the place of jurisdiction as well as the place of fulfilment for all services that follow from the business relationships that exist with us. The same condition applies to situations in which you are not associated with a general place of jurisdiction in Germany or the EU, as well as situations in which the place of residence or the usual place of residence is not known at the time of commencement of proceedings. This has no bearing on the capacity to call upon the court associated with another place of jurisdiction.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods are explicitly inapplicable.
II. Customer information
- Identity of the seller
preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany
Telephone: 0541-580 72 84
E-Mail: mail@preigu.de
We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.
- Information regarding the conclusion of the contract
The technical steps associated with the conclusion of the contract, the contract conclusion itself and the correction options are executed in accordance to the regulations "conclusion of the contract" in our standard business terms (part I.).
- Contractual language, saving the text of the contract
3.1 Contract language shall be English.
3.2 The complete text of the contract is not saved with us. Before the order is sent, the contract data can be printed out or electronically saved using the browser's print function. After the order is received by us, the order data, the legally-mandated details related to distance selling contracts and the standard business terms are re-sent to you via e-mail.
- Main features of the product or service
The key features of the goods and/or services can be found in the respective quote.
- Prices and payment arrangements
5.1 The prices mentioned in the respective offers represent total prices, as do the shipping costs. They include all the price components, including all the incidental taxes.
5.2 The dispatch costs that are incurred are not included in the purchase price. They can be viewed by clicking the appropriate button on our website or in the respective quote, are shown separately over the course of the order transaction and must additionally be borne by you, insofar as free delivery is not confirmed.
5.3 If delivery is made to countries outside of the European Union, we may incur unreasonable additional costs, such as duties, taxes or money transfer fees (transfer or foreign exchange fees charged by the banks), which you must bear.
5.4 You must also bear the costs arising from money transfers in cases in which the delivery is made to an EU Member State, but the payment is initiated outside of the European Union.
5.5 The payment methods that are available to you are shown by clicking the appropriate button on our website or are disclosed in the respective quote.
5.6 Unless otherwise specified for the respective payment methods, the payment claims arising from the contract that has been concluded become payable immediately.
- Delivery conditions
6.1 The delivery conditions, delivery date and existing supply restrictions, if applicable, can be found by clicking the appropriate button on our website or in the respective quote.
Unless a different period is specified in the item description or our delivery conditions, the goods are delivered within 3-5 days after the conclusion of the contract (in case an advance payment has been agreed upon, after the payment authorisation).
6.2 If you are a consumer, the following is statutorily regulated: The risk of the sold item accidentally being destroyed or degraded during shipping only passes over to you when the item in question is delivered, regardless of whether or not the shipping operation is insured. This condition does not apply if you have independently commissioned a transport company that has not been specified by us or a person who has otherwise been appointed to execute the shipping operation.
- Statutory warranty right
Liability for defects is governed by the "Warranty" provisions in our General Terms and Conditions of Business (Part I).
Information on battery disposal
In connection with the sale of batteries or the delivery of devices containing batteries, we are obliged to inform you of the following:
Batteries must not be disposed of with household waste.
You can either return used batteries that we carry or have carried in our range as new batteries to us at your own expense or return them free of charge to our shipping warehouse (shipping address). Alternatively, you can hand in the batteries at your local collection points.
As an end user, you are legally obliged to return used batteries so that they can be recycled or disposed of properly.
Used batteries may contain harmful substances that can damage the environment or your health if not stored or disposed of properly. However, batteries also contain important raw materials such as iron, zinc, manganese or nickel and can be recycled.
The symbols on the batteries have the following meanings:
The symbol of the crossed-out wheelie bin means that the battery must not be disposed of with household waste.
For batteries containing a certain amount of lead, cadmium or mercury, the following additions below the symbol with the crossed-out wheelie bin indicate the respective pollutants:
Pb = Battery contains more than 0.004% lead by weight
Cd = Battery contains more than 0.002% cadmium by weight
Hg = Battery contains more than 0.0005% mercury by weight
Information on the costs involved in accordance with Article 56 (4) of the EU Battery Regulation (Regulation 2023/1542) can be found at the ‘Batterie-Zurück (https://www.batterie-zurueck.de/de/bewirtschaftungvonaltbatterien/)' initiative.
Please pay attention to the above instructions.