Protective Thin Coatings and Functional Thin Films Technology
Book 2 of 2: Advances in Materials Science and EngineeringNew - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketIn recent years, films and coatings have been developed and applied in industries that have affected people’s lives in our current society. Films and coatings have also evolved from being single compound to multi-compound to multilayer and to finally being nanostructures and nanocomposites.
Protective Thin Coatings Technology Two-Volume Set captures recent developments and advances as a comprehensive and readable reference. It highlights the development and advances in the preparation, characterization, and applications of protective and functional micro-/nano-scaled films and coatings. It features various aspects of hard coatings, covering advanced sputtering technologies, structural characterizations and simulations as well as applications. It also presents technologies aimed at functionality used in nanoelectronics, solar selective absorbers, solid oxide fuel cells, piezo-applications, and sensors.
This two-volume set will benefit industry professionals and researchers working in areas related to semiconductor, optoelectronics, plasma technology, solid-state energy storages, and 5G, as well as advanced students studying electrical, mechanical, chemical, and materials engineering.
Professor Sam Zhang Shanyong (張善勇), better known as Sam Zhang, was born and brought up in the famous "City of Mountains" Chongqing, China. He received his Bachelor of Engineering in Materials in 1982 from Northeastern University (Shenyang, China), Master of Engineering in Materials in 1984 from Iron & Steel Research Institute (Beijing, China) and Ph.D. degree in Ceramics in 1991 from The University of Wisconsin-Madison, USA. He was a tenured full professor (since 2006) at the School of Mechanical and Aerospace Engineering, Nanyang Technological University. In January 2018, he joined School of Materials and Energy, Southwest University, Chongqing, China and assumed duty as Director of the Centre for Advanced Thin Film Materials and Devices of the university.
Dr. Jyh-Ming Ting is an AES Chair Professor of the Department of Materials Science and Engineering at National Cheng Kung University (NCKU) in Taiwan. He received a BS degree in Nuclear Engineering from National Tsing Hua University in Taiwan 1982, and completed MS and PhD works at the Department of Materials Science and Engineering in University of Cincinnati in 1987 and 1991, respectively. From 1990 to 1997, Dr. Ting worked at Applied Sciences, Inc. (ASI), as a Scientist and then the R&D Director. In August 1997, Dr. Ting became a faculty in NCKU working on various carbon materials and low-dimensional materials, and their (nano)composites. At the early stage, nano-scaled (composite) thin films and CNT were of interest. In particular, Prof. Ting developed and patented several novel techniques that allow the growth of aligned CNTs on metallic substrates, also holding the record of the growth rate until now. In recent years, in response to the serious issues related to environment, his research focuses on applying low-dimensional materials, mainly nanoparticles and 2D layered structures, and their composites, to energy generation/storage and photodegradation. More recently, Prof. is working in high entropy oxides. Prof. Ting has authored over 170 journal articles, given more than 30 invited talks and a few keynote speeches, holds more than 30 patents.
Dr. Wan-Yu Wu was born in Taipei, Taiwan. She obtained her Bachelor in 2000 and Ph.D. degrees in 2008 from Department of Materials Science and Engineering of National Cheng Kung University, Tainan, Taiwan. In 2010, Dr. Wu became an Assistant Professor in MingDao University in Taiwan where she was also a key member of the Surface & Engineering Research Center. In 2014, she joined the Department of Materials Science and Engineering in Da-Yeh University in Taiwan as an Associate Professor. Due to her well-recognized expertise in thin film and coating technology, Prof. Wu was commissioned to establish a Coatings Technology Research Center in Da-Yeh university. Over the years she has focused her research on thin film and nanostructure materials synthesized using HiPIMS deposition and wet chemistry processes, respectively. Prof. Wu also actively participates in professional society. She in the board of directors in Taiwan Association for Coating and Thin Film Technology (TACT). She also serves as a symposium chair in several international conferences including International Conference on Metallurgical Coatings and Thin Films (ICMCTF), ThinFilms Conference, and TACT International Thin Films Conference.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 16 to 45 business days | 16 to 45 business days |
|---|---|---|
| First item | US$ 57.13 | US$ 57.13 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.