SolidWorks Tutorial 2013

The main purpose of this book is to provide civil engineering students with a clear presentation of the theory of engineering graphics and the use of AutoCAD 2015. Each chapter starts with the chapter objectives followed by the introduction. The contents of each chapter are organized into well-defined sections that contain step-by-step instructions to carry out the AutoCAD commands. The drawings shown in this book are created using AutoCAD 2015 and Paint software.

Several improvements are made to the fifth edition. The most important improvement is the usage of the ribbon interface. The major contents of the book are based on the ribbon interface. A new chapter titled as AutoCAD 2015 Classics Interface is created to introduce the classic interface.The index is improved. The Chapter Suggested In-Class Activities provides in-class activities (or ICA). For some of the initial ICAs, it explains the drawing with the help of step-by-step instructions. Also, new problems are added to the homework chapter. Furthermore, the contents and the drawings of every chapter are improved.

Each chapter starts with the chapter objectives followed by the introduction. The bulleted objectives provide a general overview of the material covered. The contents of each chapter are organized into well-defined sections that contain detailed step-by-step instruction with graphical illustrations to carry out the AutoCAD commands.

This book has been categorized and ordered into ten parts:

• Introduction to AutoCAD 2015 ribbon interface
• Use of AutoCAD in land survey data plotting
• The use of AutoCAD in hydrology
• Transportation engineering and AutoCAD
• AutoCAD and architecture technology
• Introduction to working drawings
• Introduction to AutoCAD classics interface
• Suggested drawing problems
• Bibliography
• Index

Table of Contents

1. Introduction to Engineering Graphics
2. Getting Started with AutoCAD 2015
3. Basics of 2-Dimentional Drawings
4. Basics of 2-Dimentional Editing
5. Layers
6. Blocks
7. Layout and Template Files
8. Dimensioning Techniques
9. Land Survey
10. Contours
11. Drainage Basin
12. Floodplains
13. Road Design
14. Earthwork
15. Floor Plan
16. Elevation
17. Site Plan
18. Construction Drawings
19. AutoCAD 2015 Classics Interface
20. Suggested In-Class Activities
21. Homework Drawings
22. Bibliography
Index

David Planchard is the founder of D&M Education LLC. Before starting D&M Education, he spent over 27 years in industry and academia holding various engineering, marketing, and teaching positions and degrees. He holds five U.S. patents and one international patent. He has published and authored numerous papers on Machine Design, Product Design, Mechanics of Materials, and Solid Modeling. He is an active member of the SolidWorks Users Group and the American Society of Engineering Education (ASEE). David holds a BSME, MSM with the following Professional Certifications: CCAI, CCNA, CCNP, CSWA, CSWP, CSDA, CSWSA-FEA. David is a SolidWorks Solution Partner, an Adjunct Faculty member and the SAE advisor at Worcester Polytechnic Institute in the Mechanical Engineering department.

Marie Planchard is the Director of World Education Markets at DS SolidWorks Corp. Before she joined SolidWorks, Marie spent over 10 years as an engineering professor at Mass Bay College in Wellesley Hills, MA. She has 14 plus years of industry software experience and held a variety of management and engineering positions. Marie holds a BSME, MSME and CSWP, CSDA, CSWSA-FEA. She is an active member of the American Society of Mechanical Engineers (ASME) and the American Society for Engineering Education (ASEE).

David and Marie Planchard are co-authors of the following books:

• A Commands Guide for SolidWorks 2013, 2012, 2011, 2010, 2009 and 2008
• Assembly Modeling with SolidWorks 2012, 2010, 2008, 2006, 2005-2004, 2003 and 2001Plus
• Drawing and Detailing with SolidWorks 2012, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002 and 2001/2001Plus
• Engineering Design with SolidWorks with Multimedia CD 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2001Plus, 2001 and 1999
• Engineering Graphics with SolidWorks and Video Instruction 2013, 2012, 2011, 2010
• SolidWorks: The Basics with Multimedia CD 2009, 2008, 2007, 2006, 2005, 2004 and 2003
• SolidWorks Tutorial with Video Instruction 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003 and 2001/2001Plus
• The Fundamentals of SolidWorks: Featuring the VEXplorer robot, 2008 and 2007
• Official Certified SolidWorks Associate Examination Guide, Version 4, 2012, 2011, 2010 Version 3; 2011, 2010, 2009, Version 2; 2010, 2009, 2008, Version 1; 2007
• Official Certified SolidWorks Professional (CSWP) Certification Guide with Multimedia DVD, 2011, 2010
• Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, and CSWSA-FEA, Version 1; 2013, 2012
• Applications in Sheet Metal Using Pro/SHEETMETAL & Pro/ENGINEER