Spring Design Manual: AE-11

Usual ex-library features. The interior is clean and tight. Binding is good. Cover shows slight wear. "The incorporation of these five manuals into one volume represents the most comprehensive reference work available today. The Spring Committee wishes to note that these manuals should not be regarded as a compilation of design or manufacturing specifications; instead, they should be considered as reference works which contain essential information which may be helpful to the engineer and designer on a broad range of topics - material selection, tolerances, end configurations, fatigue life, load and stress calculations, and processing information. All of the manuals employ SI units in accordance with SAE 916, 'Rules For Use of SI (Metric) Units.'" The five parts included are : Part 1: Design and Application of Leaf Springs SAE HS 788; Part 2: Design and Application of Helical and Spiral Springs SAE HS 795; Part 3; Design and Manufacture of Torsion Bar Springs SAE HS 796; Part 4: Incorporating Pneumatic Springs in Vehicle Suspension Designs SAE HS 1576; Design and Manufacture of Coned Disk Springs (Bellville Springs) and Spring Washers SAE HS 1582. …